Search the Community
Showing results for tags 'sold'.
-
1984 R685T single axle tractor EM6 250 with Mack 5 spd. & 4.00 rear ratio. The Good: Injection Pump completely rebuilt along with injectors in 2014 (no miles drive since). Have all parts to put back together (Radiator, CAC recently cleaned, and air cleaner). The truck can be started and moved under its own power. Power steering and AC (not connected), and Budd rims all the way around. Have good title. The Bad: Will need replacement steering axle (bushing wore out and oval’d the top part of the axle on drivers side only (above the king pin). Trucks runs great once started….just doesn’t l
-
With absolute regret I have to put the General up for sale. 6 Months ago my boss retired and I found myself unemployed. I started my own thing over the last 5 months and now I am officially a business. With this comes more responsibility and expenses. Unfortunately this means a few of the "extra" toys have to go. This being one of them. I am sad and sick in the stomach to put the General up for sale. My main goal was to get it road worthy and bring it to Macungie. I never got to take it to any show. Which is why the decision was made to put it up for sale. The specs: 1984 GMC General 5-Star S
-
https://sfbay.craigslist.org/eby/cto/5355065274.html Hell of a nice guy. Said it went to Quebec???? fullfuel01 know anything?
-
E6-300,12 speed,4:17 on Camelback,Level 3 interior,approx.450k miles,needs trunion. $10k obo
-
Got some extra pieces that I don't need. Cowl,dash,doors,also have cab sub frame not pictured. Doors need a little work,rest of the parts are very nice. Make offer. Like to sell as 1 lot.
-
When I recently bought my B-Model, it came with a NOS Hendrickson R-Model bumper that he was going to install on the B-Model, but I am not. As far as I can tell, it has not been mounted on a truck. They guy I got it from says he bought it after he got the truck, and left it in his barn for 7-8 years. All the chrome looks great, and there is a touch of surface rust on the un-chromed back side, as you can see in the picture. Looks like these sell for about $350 new. I'd be happy with $200. It's in southern RI. I do have access to a shipping dock, and if it needs to be shipped, I will pallet it,
-
I'm looking to sell this cab it was from a b30 I started modifying the driver side floor to the b81 style floor it can be changed back to the flat style. The floor was rotted out on the driver side before I cut it out so I didn't ruin a good cab by doing this. The rest of the floor is just about perfect and still has green paint, the passenger side rocker is nice and straight. The driver side rocker and the area below the air vent needs some work. The back panel of this cab took a beating and would probably need to be replaced.The roof has a few small dents. The areas around the windshield whe
-
I was sorting thru some boxes looking for some other parts and I found 2 sets of emblems for a RS700L. One pair is good shape,other pair has a broken stud on each one. I'm going to keep one pair,don't matter which,make me an offer.
-
Runs, needs brakes and correct bed put on it. Have 2 beds, one military ruff but all there, one civilian easy to make military bed out of. Have extra grille with head light guards, have some extra sheet metal as well. $2,250 obo. Above Allentown PA. No time to work on it so it might as well go to someone who will.
-
For sale or trade,11 ft. Cresci steel dump bed with hoist.,good shape. Make offer. May consider selling truck also,1978 RS686ST Valueliner,ENDT676,5 speed,very clean cab,3:87 rears only Camelback,runs and drives excellent.
- 1 reply
-
- 1
-
-
'66 IH DCF405 long hood,8V71 Detroit,air start,2 stick 4x4,Hendrickson suspension,twin screw,20" spokes,farm grain truck for many,many years,solid,very little rust,easy fix up,bought it a couple years ago and haven't touched it so I guess it needs to find a good home. $5000/OBO or take anything Mack on trade.
-
Due to getting my B75 back, the R is on the market for now..."73 R795ST,i bought it from the ORIGINAL OWNERS!Truck is from New Jersey but was moved to South Carolina in the "80's.It was ordered new by them as a lowboy truck,pulling dump trailer on occasion.ENDT865 @325HP(engine brake) with a 6 speed low hole.44K rears,full double frame with NO spreading!Everything on this truck is straight and tight as it has low original miles/hours.Very dry as well,not full of leaks...Cab roof ...panel has some rust,but is repaiable.Comes with a N.O.S piece if you wanted to go that route,drip edge is nice.Ha
-
Came out of a truck that was in a flash flood. Needs to be rebuilt or excellent for parts. complete other than compressor. drained oil and clean water came out. Was not started after flood. Would like to sell as a whole instead of parting it out. Was in a working truck before the flood. Any questions please call Richie (I don't check this forum daily) $3,000 607-725-3639
-
All there,will start right up with a tug or batteries,rebuilt Cummins 220? and a 10 speed Roadranger.Great truck to restore or do a little work and enjoy it.Lightweight model with a glass tilt hood/fenders,aluminum bumper.Cab has rust but it's repairable.Sold with a GA bill of sale due to the year.PRICE DROP! $2500- BO/trades maybe?
-
Two (2) NOS and one (1) used LH complete vent windows. Not sure what they fit but believe they will fit R/RW/U/F models since they used the same doors. $150 for all three. No charge for the dirt.
-
NOS tan heater cover for R. Part number on box is 2790. May fit other models. $50
-
Howdy all! Up for sale is 'Mater. With gracious help from members here we have identified this wonderful dump truck as a 1964 B-61 SX. It has a tandem axle and is a diesel. The "S" indicates the tandem axle and "X" indicates the extreme load capacity. The frame is in excellent condition as is the ceiling in the cab. There's a 2' oak piece in the frame that is also in excellent condition. Mater runs beautifully, he fires right up and is ready for a new home. I bought him as a work/yard truck and don't envision any more projects with him. Please, please do not buy him for scrap!
-
SOLD!!! Guys, I think I've had enough. I'm not having fun any more. So, I think the R600 is going on the block. I hate to let it go, but I think it is the right thing to do. Asking $7,000, but might do a little better for one of you guys with "no-kill" shelters. This is NOT a barely-running-pulled-out-of-the-weeds-and-shot-with-paint-export-special. The truck is driven almost every day. It starts instantly, works extremely well, and drives great. Everything works (except maybe the heater...water is turned off at the manifold). Every light on it works. Have clean NC title, which is a fea
-
Listing this for a friend,2011 Rawhide,low miles,232k, Mp8445,13 speed Fuller,3:58 rears,air ride,loaded. PM me for more info.
-
1957 B-61T For Sale. Good running END 673 with duplex 10 speed, 22 inch rubber all around. Mack reman 4.00 rear (needs to be installed). Overall, sheet metal is excellent condition with exception of one spot on drivers side window post (see photo). Floor and cab are solid. Will need a new paint job as clear coat is pealing off (20 year old paint job). Located in Maryland 21795 $6,300.00 or BO Title in hand Contact Doug for more information 301-573-4693
-
OK not a Big Mack Truck but still a truck. I found a flatbed rollback I want to buy locally so that means a few of the "extra vehicles" have to go to fund it. 1978 Ford F150 Ranger - 107,000 Original Miles, Original Dealer Invoice, 351M, Automatic, 3.25 Gear Ratio, Power Steering, Power Brakes, Air Conditioning (Compressor kicks on but needs charge), Delay Wipers, Factory AM/FM - WORKS!, Sliding Rear Window, 2" Trailer Hitch with Brake Controls in cab. Interior in good shape. Seat was already redone. Runs well, drives nice. Body has some typical rust in the bed but worth repairing. I just did
-
For sale,whole or parts.'82 Freightliner,400 hp 3406 Cat.RTO14613,3:90 SQ100's on Airliner air ride . Been sitting about 5 years. Offers or Mack related trades accepted.
-
NOS Mack mechanical tachometer (0-3200 RPM) with hour meter (17MT389P1??). This tach was not in a box and the trim ring is chipped. There is no legible pn on the back side. Make offer. Will ship but buyer to pay shipping.