Jump to content

lobo

Puppy Poster
  • Posts

    27
  • Joined

  • Last visited

Everything posted by lobo

  1. I just left an email on Tegral's website. I do not know if the Trident is available in the U.S. I will try to buy two forks and some of the sideboards.
  2. Thanks everyone lots of good advice here. We put a hook on a stick for me and the other driver about a year ago to grab things off the bed without climbing. I will buy two of the tridents with the sideboards, did not know about them. I am going to start carrying a 6 ft. fiberglass ladder with me from now on when I go to the plants. We do not need a three axle trailer it is just what we have. My dad and I bought that trailer over 30 years ago for $2500.00. Before that we had a 1952 and a 1953 Trailmobile two axle trailer with the turn tables. Those were nice old trailers and they had a spring mounted locking pin to make it easier to back up. The trailer has reyco single leaf springs on it. The dolley is newer I think it is a Greatdane but also has the reyco system. I am 6'2 280lbs and not as strong as I used to be. The real solution here is for me to stop drinking beer and lose 80lbs. Anyway thanks for the help, this is a very friendly forum. Randy
  3. We always wanted a tractor in our small fleet. It would not be real practical having another truck around and only using it once a week though. I would love a tractor with a drop deck trailer, perfect for an older driver. Here is a pic of some of the loads we have to tie down.
  4. I have been pulling pup trailers for over 40 years and love how they follow my tandem flatbed boom truck. We haul brick and stone with a 1987 Mack RD and an 1990 International Paystar 5000. Trucks empty are 30,000 and the pup weighs around 10,000. So we are 40,000 empty. Years ago we would go up to 60,000 but now we try to stay under 50,000. My main problem is now with my age and weight and the pup trailer so high that it is getting hard to tie down. My friend has a Eager Beaver 20 ton lowboy for sale the deck is 34 in off the ground vs my trailer which is almost 60 ins. His trailer is about 8,000 lbs. My trailer is 27 feet total with tongue his is 31 feet. Lighter but longer easier to back up but will not follow as well as my old 1971 Ravens. I do not see to many guys haul freight on lowboys but do not see why you could not. We only pull the pup about once a week to go to the brick plant or make a far off delivery. Local deliveries are made with just a straight truck. I also own a John Deere 310D backhoe which is mostly for personal use but it would be nice to have a way to move it. Also my pintle hitch is 34 in off the ground but I think his hook could be adjusted up or we fab it. I am going to start carrying a ladder with me but I do not want to fall so I fill the low deck would be safer. I am thinking wrong here. The wheel base on our trucks is 237 in so I am also going to be pretty long with that setup. Another issue would be tongue weight. With the pup trailer there is no weight on the tongue. Any thoughts on this setup? Thanks
  5. Sold the 71R model today. It went to a very good home and a very happy new Mack owner.
  6. Yea I thought about just because they are asking a lot also. It just seems cheap to me for a truck that is in excellent mechanical condition. I can put 10 ton on that little truck and pull just about any hill around here in 5th gear. I think I will call the young man tomorrow and let him have it for his offer. As always you guys are very helpful. Little sad though, that truck has been with me for around 35 years. Thanks again Randy.
  7. I have been looking around on line and it seems like $7000.00 does not buy a very nice B model. Are the B models more sought after than these early R models? At my age and running two small businesses I am wanting to downsize and simplify my life. This potential buyer is wanting to restore this truck and put it in a garage. Thanks Bob.
  8. I have an offer on this truck of $7000.00. I do not need it any longer but was thinking its condition and being a small cab all steel dash maybe I should hold out for more money. You could not buy a good 1 ton for that kind of money. This is an ad to describe the truck and my profile is a picture of the truck. I would appreciate any advice and am sorry if I should have posted this in the for sale section. Thanks Randy 1971 Mack single axle dump in excellant working condition. Needs nothing, ready to work with a powerful 237 Maxidine motor. Motor was rebuilt by Mack garage in Wheeling WV some years ago but does not have many miles on a frame in rebuild. I have records of most of the work done on this truck. This truck has been in my family since the 1980's and has been garaged kept all those years. We have installed a new compressor, turbo, 12 volt alternator, new batteries and steer tires. All lights, heater, wipers and gauges work. Truck has a 20 ton hoist mounted under a very heavy duty dump bed. Also double framed to front of cab and triple frame over trunion. I do not need this truck any longer and that is the reason for selling. I am asking 10,000 or best offer. call Randy
  9. From the album: 1987 RD Mack

    That was our 1971 RD with a 237 5sp two stick. Pup is a 1952 Trailmobile with a turn table with ball bearings instead of a 5th wheel.
  10. From the album: 1987 RD Mack

    350 4 valve with dynatard and a 14608LL fuller trany. 44k mack rears and Hendrickson suspension. 18,000 lb front axle and with boom almost 30,000 lbs light weight.
  11. From the album: 1987 RD Mack

    1987 Mack RD pulling a 1971 Ravens 3 axle pup trailer.
  12. From the album: 1987 RD Mack

    Proud driver of a new 1987 Mack. She is now 28 years old with 550,000 miles and still pulling a pup trailer.
  13. From the album: 1987 RD Mack

    Me and my son coming home from Belden Brick in Sugarcreek OH.
  14. Another helpful hint to anyone wanting to learn to double clutch. Anything you drive that has a standard will shit just fine with a double clutch. A standard car or pickup truck can give a guy good practice in a smaller easier to handle package. I drove truck so much that it is just a habit to double clutch.
  15. Glad you are having fun and be careful. I would always double clutch up to 5th on the main and then double clutch from say LO to HI on the auxiliary as one shift. Then double clutch from 5th to 1st as a second shift. That is simple and works.
  16. One of the first trucks I drove was like a 1968 DM. I was told it was a chrysler v8 gasoline engine with a 5+4. In the beginning I would shift all 20 gears even when empty just because I was an 18 year old gear head. I remember the transmission as very smooth and easy to shift. Once I learned it well you could jump around in it pretty good depending on your load and how steep of a hill you were climbing. Slow down and double clutch.
  17. Well its charging with a rebuilt alternator. I bought from local Mack dealer bottom and top bracket for alternator. They had parts in stock and the same bolt hole pattern for bottom bracket on engine block. I changed top bracket also because the alternator uses a larger diameter bolt than does the old generator. I bought a rebuilt 160 amp alternator that is isolated, it does not ground through its housing. This type alternator has two wires, positive and negative. I hooked up these two wires to the starter and solinold pos. & neg. battery cable connections. I removed the voltage reg. and all of its wires. When engine started my original volt meter, I thought it was an amp meter, goes up to 14 volts. Also both 12 volt batteries are reading 14 volts with my hand held volt meter. The two 12 volt batteries turn the little 237 over just fine. I put one 12 volt on each side in middle of box and snugged down with original battery hold down for the two 6 volt batteries. My original battery cables hooked up to the two new 12 volt batteries. I did not change polarity yet, still pos. ground, but with this type of alternator I can change polarity anytime I want. Install looks orig. with no fabricating brackets and any stock alternator will slip right on. Brackets where not cheap, 125.00 for bottom and 26 .00 for top. A guy could go to a salvage yard for the brackets, I was in a hurry. I thought it was neat Mack did not change the bolt hole pattern on the block when they switched over to alternators. I always said working on a Mack was like working on an old Chevy. Parts interchange ability. If I get a chance will post pics of install and parts numbers of brackets. Thanks again.
  18. Thanks Freightrain, hot to volt or amp meter then to ground from 2nd terminal ( on back of meter ) or to neg. battery terminal?
  19. Thanks guys, I did this gen. to alt. switch on a 72 R model we had once. I think it had a pos-neg switch on the radio. I think the new alternator will hook up with one wire straight to battery. Then I will have a field and armature wire from old generator going to voltage reg. I could just tape them up but amp meter may not work. Anybody here know what to do? Thanks again.
  20. My 71 Mack recently stopped charging. The 6 volts were getting old, one showing only 4 volts, dead cell. I put 2 12 volts in, starts fine, but still not charging. I am going to replace the generator with a new alternator. I would like to switch to neg. ground also. Will that toast my radio or anything else? Why are these lines in my post?
  21. Good idea Rob, and thanks for helping out a new guy here. Very good site.
×
×
  • Create New...