Jump to content

B53

Puppy Poster
  • Posts

    25
  • Joined

  • Last visited

Posts posted by B53

  1. Looking to sell my '64 B53. Had it a few years now and just haven't done much with it. Time to find it a loving home. Has END673 engine, air start, 17k front axle with power steering, quadruplex transmission. In mechanically good shape, starts and runs great, clutch is good, shifts well. Needs brakes. Body needs work but isn't terrible. I do have the fenders, took them off to start working on it. Fairly complete truck. Hate to part with it, but I just have too many projects and never seem to have the time or money to devote to it.

    Used to be a mixer. Located in upstate NY.

    I have $4800 into it...make me an offer. Also consider trades for an older pickup, car, or boat. PM on here, or email sales@sennett-tool.com

    Kevin

    post-9541-0-54561000-1437003561_thumb.jppost-9541-0-91280500-1437003570_thumb.jppost-9541-0-81610100-1437003574_thumb.jppost-9541-0-17588900-1437003579_thumb.jp

    • Like 1
  2. Bruce Springsteen and the E Street Band!! Clarence Clemons, the greatest sax player ever, R.I.P.

    bulldogboy

    P.S. other dog Talking Heads were right up there on my list.

    Hell yeah buddy. Just saw them in Buffalo a few weeks ago. Clarence's nephew Jake played sax and did a damn good job.

  3. The timing mark on the pump is on when the flywheel is at 28deg BTC. I watched for the valve overlap as stated, and timed it there. When it wouldn't start, just for giggles, I tried it the other way as well- as in turned the crank one rev and back to the timing marks. It smokes and kinda fires the first way, nothing the second way. So I'm pretty sure it's timed to #1 cylinder. Is it possible that the flywheel timing marks are off?

    Kevin

  4. Hi Guys,

    I pulled my injector pump to fix some oil leaks, and after reinstalling it I can't get the engine started. I re-timed and primed the system per the book. Even tried the timing both ways- to both Nos. 1 & 6 cylinders just to make sure I had it timed correctly. I cracked the high pressure lines at the injectors and cranked a bit to bleed whatever air was in the lines- I do have fuel to the injectors. She fires sometimes when cranking, but never actually starts. Smokes like hell though. Whats wrong?

    This a 673C engine with PSM (rotary) style pump.

    Thanks,

    Kevin

  5. Thanks for the replies everyone!

    I got the pump off. Its the PSM style. I cleaned it up nice and am ready to re-install with some Permatex between mating surfaces to prevent leaks in the future. I read and understand the pump timing instructions in the service manual. One question...where are the timing marks to determine crank position? Also, how do I know when #1 piston is on compression? Watch the valves as I rotate the crank?

    Thanks again,

    Kevin

  6. Hello all,

    I posted this in the engine forum but haven't gotten any responses. Thought I might get some ideas here.

    I have a '64 B53 with 673 engine. When running, it leaks oil from around where the injector pump mounts. So I decided I'd take it off, clean it up, and check the gasket.

    So, I got all the lines/hoses etc. disconnected, and took out the 3 bolts that hold the pump to an intermediate base/adapter piece, between the pump and the engine's front housing. Pump pulls out about half an inch, but no more. Next, I took out the three bolts that hold on the intermediate piece, and that pulls out about a quarter inch, but no more.

    How does this pump come out?!

    Its an American Bosch pump, the kind with the 6 injector lines arranged in a circle, like a distributor cap.

    Any ideas?

    Thanks!

    Kevin

  7. Hello all,

    I have a '64 B53 with 673 engine. When running, it leaks oil from around where the injector pump mounts. So I decided I'd take it off, clean it up, and check the gasket.

    So, I got all the lines/hoses etc. disconnected, and took out the 3 bolts that hold the pump to an intermediate base/adapter piece, between the pump and the engine's front housing. Pump pulls out about half an inch, but no more. Next, I took out the three bolts that hold on the intermediate piece, and that pulls out about a quarter inch, but no more.

    How does this pump come out?!

    Its an American Bosch pump, the kind with the 6 injector lines arranged in a circle, like a distributor cap.

    Any ideas?

    Thanks!

    Kevin

  8. Good morning all,

    Been working on my '64 B53. Got the oil pressure gauge working. Shows 50psi no matter what RPM. Is this normal? Got my air starter pulled off and cleaned all the gunk out of it- lubed and reinstalled, and works MUCH better. On to the next challenge:

    Now that it starts easy, I need to be able to shut it off. Easily. The shut-off cable needs some adjustment, and of course this adjustment is between the injector pump and the block. Pretty much impossible to get at. Anybody got an easy way? Plan B is to just pull the pump and clean it up. It leaks oil around where the pump bolts to the drive housing anyhow.

    If I pull the pump, how hard is to reinstall? I.E. bleeding the pump and injectors, etc.

    Any help is appreciated!

    Thanks,

    Kevin

  9. Hello all,

    I just acquired my first Mack a few weeks ago. Its a 1964 B53, formerly a mixer. Over all in pretty restorable shape, but has a fair bit of rust, having spent its life in upstate NY.

    On to the questions. Its an air start, which seems like quite a hassle. Will a new 12v. starter bolt on in its place, and where can I find one?

    Next, while it starts and runs well, the oil pressure gauge doesn't come up. I assume its a mechanical gauge? Where does the line connect to the block? I assume this is the END-673.

    Pics to come soon!

    Thanks!

    Kevin

×
×
  • Create New...