Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,206

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    I was always told if you started it without the lock in it would loosen the clutch 🤷‍♀️
  2. terry
    can,t say that I have, I was a Mack dump owner, driver for 40 plus years, so most of my work was on my own truck. I would help in the shop for the company that I worked for once in a while , seems like his mechanic would use a rattle gun with a long bit to knock a stuck one loose. Terry
  3. terry
    This is a new one on me to adjust. terry
  4. terry
    Don’t know what kind of clearance you have there, but sometimes you can just slide trans. Back and do your clutch work. Terry
  5. terry
    Counting the lolo in reverse, should be six. Terry
  6. terry
    To many guys try to use silicone and squeezes the gasket out. terry
  7. terry
    I think the stand I have you have to use the oil cooler with it, it has two hard lines with o rings between cooler and stand, I’ll have to dig it out and take a look. Terry
  8. terry
    A agree with joeys system on a few more pounds of torque one time and run, I have seen guys do that without a problem. Terry
  9. terry
    I tried that once, the return side stayed way higher than the suction side. Apparently the crossover hose wouldn’t even it out fast enough. Terry
  10. terry
    I have seen guys retorque them and I have seen guys torque once and run it, better minds here will guide you😁. Terry
  11. terry
    What the hell is a regenerative turkey!😂. Terry
  12. terry
    I have a two spin on oil filter stand with the oil cooler attached, came off a 237, don’t have an idea what it would cost to ship? Terry
  13. terry
    Needs original bumper. Would look alot better. Terry
  14. terry
    Fifth photo down looks like a little bit of rust starting between frame rails ,check that real good, and look to see if outer rail has been welded along corners. terry
  15. terry
    Doesn't your spin on system have two metal oil tubes on top of filter housing one to each end of oil cooler? terry
  16. terry
    237 came out about 68, last B was 66 I believe. Terryi have never seen that oil filter in the third pic. Does the first pic. Engine have a oil cooler on it?
  17. terry
    It’s a 237, beside the tip turbine I’m not sure what else needs to be done to make it a 285. Terry
  18. terry
    Whenever I’m trying to find something, I use my desktop computer, much better. Terry
  19. terry
    Seems to me some of them said tractor protection valve? Terry
  20. terry
    Yeah that’s older style 12 spd. A real massive transmission. Terry I personally love that transmission!
  21. terry
    I ran into this on a 72 el camino, pulled the engine thought the bearings were std, reassembled and a small knock when warmed up, come to find out G.M. would grind a crank to a odd undersize, and make a matching bearing to save a crank with a real slight flaw. terry
  22. terry
    That could run a lot of trouble free miles for a guy! Terry
  23. terry
    Maybe was changed by a previous owner, trying to give it a little more power? terry
  24. terry
    Round ones were early housings, don't know the exact year they went with the square housings. terry
  25. terry
    I’m thinking no the bronze bushing spindle I believe is threaded on the end and I don’t know if the 44K rubber bushing has any threads. Terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...