Jump to content

fullfuel01

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,097

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by fullfuel01

  1. fullfuel01
    I cant get enough fuel to make all the boost it should. 30psi was the max with non stock injector and still a lazy dog. I have been trying to find someone that can trick the ecm without luck. I also try to get bosch pump that supply more fuel with the same pulse. If you don't have a Cat, no one want to touch or know how to improve it..
  2. fullfuel01
    it seems they do good on E7 pre etech engine (vmac1) I have on on my etech and it's too big, I guess it wouldnt work good on a ami either. I will retrofit to a non wastegate 460 turbo.
  3. fullfuel01
    thanks for the info!
  4. fullfuel01
    I don't think mack fitted any Allison to their E9, but I have somewhere a book with all the adapter p/n from Allison to fit on mack engines. You will probably be done before I put my hand on it again.. You might have better luck asking the guy who did the Bandag Titan in Australia (I believe) they made it for sure and might have spare parts
  5. fullfuel01
    hey guys, looking for a distributor for a 1947 mack EH with a 121hp 6 inline gas engine. the old one was lost at the repair shop. Hit me with what you have or good source!
  6. fullfuel01
    E9 engine, fuller 15 speeds, double frame is ok, not the original lenght, 72'' rear spread on hendrickson spring. Located near Montreal in Canada. we can deliver on the U.S. side. 14Kcdn currency 450-803-7211 for more info
  7. fullfuel01

    Mack MH

    fullfuel01 replied to Marcel67's topic in Odds and Ends

    got sold and resold. it's been posted here i believe
  8. fullfuel01
    what difference do they have in between Mackpro?
  9. fullfuel01
    I have Nest camera. like them a lot
  10. fullfuel01
    I'll like to know what you have in your etech. all the one I have are gutless. They can't run with any good E6 engine. I had bigger injector on an etech 350 and bigger turbo and it's still not a good old dog.
  11. fullfuel01
    fit or not, they are not that much of a big thing. I havent heard anybody that like their MP10.
  12. fullfuel01
    cant remember!! it was in the states, I want to say Kentucky or surround but not sure. I always save those pictures but cant find it anymore
  13. fullfuel01
    picture worth thousand words
  14. fullfuel01
    Does anybody remember where this was posted, there was a few shot of a black ch with a sleeper sitting in the field. All the back panel was signed by the mack employee in gold on the back of the sleeper? there was multiple trucks at the same location and they said the owner wouldnt sell anyhthing.
  15. fullfuel01
    I have picture of this truck in our yard. Dad had it for tryout. They never loaded it lol
  16. fullfuel01
    you are right, they have capacity to supply more then enuff of fuel but they dont because the ecm is program to send a certain amount of fuel. If I could find a programation that allow a bit more fuel on each pulse, I'll be ok. This seems to be impossible, so I want EUP that will allow more fuel to be delivered to the injector. It is the exact same thing of when you turn the rack on an old Robert bosch pump. You didnt had to change the injector on an E6 to make it go, we just added fuel to the injector.
  17. fullfuel01
    I had upgraded one but i could ear a bad bark like a miss on pulling. i got all 6 out and pop tested, 3 had a bad spray. sent them to the injection shop and they told me they are cook! sent me stock injector back. I was pissed. So now i can hardly get 25 pound of boost and it's still a lazy 350. I am trying to get modified EUP so they give more fuel without the computer knowing it, basically it's like turning the rack on any old Mack mecanical engine. No chances so far..
  18. fullfuel01
    i run a detroit turbo on a etech an its not working good. too big.
  19. fullfuel01
    I bought the original truck that was made new for the movie from Dan. We have been able to put our hand on the RS700L Glider Kit used in the movie too but not from Dan. I don't think I can make it to the show, work go before hobby here...
  20. fullfuel01
    i bought a 2008 granite with a bad mp7. taking that volvo stuff out and will be fitting a mecanical E7. way to go in my opinion.
  21. fullfuel01
    there is a big relay in the fuse panel. once bad or when missing this is what it does.
  22. fullfuel01
    did you think about the ratio change? T2090 is .71 Od and T2070 is .77 od.. with the 5.02 rears it will be slow
  23. fullfuel01
    i've seen it for sale a couple month ago. it was in Florida.
  24. fullfuel01
    I'm just done doing a set of dual exhaust on a 01 Granite. 5'' from the turbo to the muffler and the Y is under the cab. there is a repto on the truck too..
  25. fullfuel01
    someone had some made here, look in the old thread you will find it

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...