The Vintage Machinist

That would be great, I need em. Sorry for the delay, I had hard time with the funeral. I sending you mail today.

On 7/29/2020 at 9:00 AM, Wrecker Rebuilder said:

Thanks that helps raining here today so stopped

10-4 thanks for your help btw.

Marty

2 hours ago, Wrecker Rebuilder said:

Starting to take this thing apart. Interesting just to figure out how it is put together

Yes I've realized today and you have to take the shift forks and rods out. You can take the high low case off complete, the Hi-Lo fork, the bearing retainer with all the bolts around it, I still haven't got mine apart all the way I think I have to take some clips off the shaft to slide off some gears ..the part I need appears to be the main shaft.

9 hours ago, Wrecker Rebuilder said:

sorry typo thats back of the duplex or in the back of the transmission itself?

Yes and you can leave the bearing on the shaft with it I think mine has the wrong bearing on it....

1 hour ago, Wrecker Rebuilder said:

Hi  again. I looked. This is a TRD duplex. I got it out of a fire truck for the engine. The idiot removed it with an end loader breaking the ears on the transmission case. Is this in the read of the duplux hi/lo shifter or in the transmission itself? This is a TRD  . The part number on an attached plate to the hi/low shifter box is 2227583 if that helps. Never took one apart but this would be a good candidate since the case is busted and probably had little use as a fire truck. 

Yes it's inside of the high low shift box and that gear is integral with the shaft inside the trans. I will look at the numbers on the housing today.

Thank you

 Marty

I am looking for a pair of earlier style rear brake Chambers whatever they would use for 1954. Cast iron or aluminum is fine with me thank you. My H63 is missing them. 

Thank you

Marty

8 hours ago, Wrecker Rebuilder said:

Hi! This is wrecker rebuilder in Atlanta. I was checking on my post immediately below yours. I think I may have that thing. I need to go check. I have a duplex out of a junked 1950  fire truck with a broken case. I will look and ne back to you  may take a day or two.  

Thanks!

 Marty

5 hours ago, Brian L Blaylock said:

I have a complete trd-67 that I would sell

Let me know. 

6 hours ago, terry said:

What did the gear on the counter shaft look like that mates with that gear?   terry

Amazingly the teeth just have a little bit of damage on the very edge. What happened was a bearing came apart and went through the gears back there.

I am in dire need of a Mack duplex transmission I believe it's a 670 gear that's Integra with the pinion  shaft is stripped. This is for my 1954 h63. Or parts will do I have booked in the parts numbers thank you.

I need a duplex trans... I found a striped great in the compound I think it's a 670.