-
Posts
191 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by Brian L Blaylock
-
-
If you’re using 4 6 volt batteries do yourself a favor and replace all 4 of them
- 2
-
We need to see lots of pictures
- 2
-
Hey everyone I need some help I have a ENDT-865 that will not start but will hit on ether I have not had time to check it out in detail I’m going to change the filters and check all of the lines other than that or a bad supply pump what else could be wrong thanks
-
It looks to me like the only thing that the extra frame does is provide a place for the ramps behind the fifth wheel and to mount the tail lights and mud flaps the boogie is all still bolted to the original frame
- 2
-
I don’t know about the gas powered trucks but the diesel powered trucks were 24 volt starters with the rest of the truck being 12 volts and positive ground
- 2
-
Mack used 3 different shades of beige paint over the years light medium and dark
-
Rowdy sorry to hear about the passing of your grandmother as far as inconsiderate people unfortunately they are everywhere not just in the cities I live in a very rural area and back in 1998 when my dad died an asshole farmer in his semi ran me off of the road while in my dad’s funeral procession out in the country over four miles from the nearest town
- 1
-
- Popular Post
- Popular Post
It’s more than likely a endt-866 with a 12 speed but it could possibly be a endt-865 with a air shift 6 speed the engine number will be stamped on the block as described in a previous comment if it is a factory endt-866 the truck vin will start out as R-797 a truck with the endt-866 will be R-795
- 3
-
FJDRILL it was a pleasure to visit with you over breakfast let me know the next time you are up this way and we can get together again
-
Happy Birthday
- 1
-
Happy Birthday
- 1
-
Geoff it’s the 1150 I ordered one from NAPA it will be in on Monday thanks for the reply
- 1
-
would anyone have a part number for the blower motor switch for a 1980 Superliner thanks
-
Oh ok I’m off work Thursday and Friday I thought if you was going to be here one of those two days we could meet up for lunch or something maybe another time
-
Yes the one outside of town was a L series of some kind I think it was a LJ but not sure it was an old RL Jefferies truck it went somewhere down around Owensboro Ky I think the old twin steer was called double ugly it belonged to Garden Drilling out of Salem Illinois for a long time but it belonged to someone else when it sold at the auction in Grayville when are you going to be up here
-
If it’s a rig up tandem I know the truck if it’s the truck I’m thinking of Sam sold it at his auction and it went to Mississippi I knew Sam he was a good man I done quite a bit of winch truck work for him before he passed
-
Sounds like you are going to Johnson’s in Norris City I’m just north of Crossville
-
Hey fjdrill what part of Illinois and Indiana are you going to be in I live in that area
-
The first chance I get I’ll see what I can do
-
I have an old B61 with one of those governors
-
- Popular Post
- Popular Post
Whoever drove it last probably pushed the fuel shut off cable back in and after it set for as long as it has the rack is probably stuck in the wide open position
- 3
-
Those red dot units that mount to the back of the cab work really well
-
That’s a good looking collection if that mixer is a first gear it will have an extra bulldog in the box if you don’t have the box they are the same on the 1/25 and 1/34 scale
-
I have done it by myself but I had my hands full
Happy Birthday Barry 🎂
in Odds and Ends
Posted
Happy Birthday Barry