fiveseven0trkr

Gotcha thanks. I didn't know what all differences would identify it as a small cam. Also I didn't know they put a intercooler on the small cam, thought that started after the big cam thanks

Midway between Selinsgrove and Mifflintown near route 35

when he loaded it he says the brake knob is between the seats, front of the back wall

Yes that's the one, sorry I could have helped you out with finding the link

Yes there is a gearcase a few feet behind the transmission where the power take-off for the water pump comes from. I don't know yet what all it does

Ha ha it was a W900A wrecker sitting in the weeds so that would reeeeally be off topic. Lol. Sorry but I don't have pics or deets on it soooo

Ya that was my thought too... I'm too young to know much of aluminum frames but seen it on a local wrecker recently and yea it was thick. What are pros and cons of aluminum frame?

OK let me make a note of that. ✍️✍️ lolol

Mowerman I don't think I am gonna get a good night's sleep till the unit is in my driveway. had a phone conversation with the driver after it was loaded. He says the cab is more solid than he would expect a truck of that age to be. The frame is the thickest he has ever seen. But he couldn't tell me if it's aluminum so yea I'm chomping at the bit to get it here and crawl all over it finding numbers and figuring out what I got.

Thanks mechohaulic we really like that trailer 53' with 2 lift axles so it's easy to make it Cali legal. truck fired up and drove on the trailer under its own power! yes height was measured, it was 14' from the earth to the tip of the exhaust pipe so he removed the muffler and stack and it is now under 13'6" , stacks on the Kenworth are 12'4" so it makes the load appear tall. Should I take this off the introduction forum?

She's on the wagon...

What would classify it as a western model?

Oh boy now you're making me nervous lolol, I will definitely be taking lots of pictures but this isn't going to be a six digit, every nut-and-bolt, frame off restoration. Cause there isn't six digits available to make it happen. lol. I'm hoping to have a lot of fun with it and end up with a somewhat user friendly sleeper truck. But I currently have my Marmon tore down for a motor rebuild and just got the motor back. After that's stuck together and making revenue again, this ol Mack is next!