Jump to content

qcwacojc

Puppy Poster
  • Posts

    5
  • Joined

  • Last visited

Location

  • Location
    Waco Tx

Profile Fields

  • Interests
    Construction company mechanic shop

qcwacojc's Achievements

Newbie

Newbie (1/14)

  • First Post
  • Conversation Starter
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. Thanks again for your help. That diagram was it
  2. Hey, That is exactly what I needed. Found problem right off the bat. Bad connection at the back of the fuse No 32 15 amp that powers the Bosch FIC module and the shut down relay. Thanks for your help
  3. Last 6 058621 whole vin 1m2aa18y3tw058621 Thank you
  4. Hey any help would be great. I have a 1996 CH613 I brought into the shop for a blown running lamp fuse and now have a crank and no start. Here's the story. My guy pulled every fuse to check for which one was blown instead of just using a test light and check each side of the fuse, and from then on I have had intermittent communication with the ECM and no communication with the FIC, the "eng shut down" and the "elct malfunction" lights come on and off intermittently I have cleaned every fuse and rechecked them, looked at wires in back of fuse panel, checked coolant level in the tank and it's sensor and oil level and so on........ I got a used ECM and FIC from a junk yard that were an exact match on the model and part numbers. Now the lights are coming on and going off like normal when you turn the key on but still no FIC communication and no start. I cannot find any wiring or fuse block diagrams to know what goes to what. The local dealers for 100 miles around no help with service (only parts). Does any one out there know how to get these diagrams or might have one? And if anyone has some insight on this issue that would be wonderful. Thanks ahead of time Jared
×
×
  • Create New...