-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by Bill Ran
-
-
We have 2 problems with this truck,
1. small amount of antifreeze coming out of blowby tube while running. It goes through 1 gal every other week.
2. There is a rattling sound when compressor comes on and goes away when the governor cuts out. Compressor , governor and air dryer has been replaced.
Truck is an 04 RD 688s with a 427 and 18 spd trans vin 067670, any help would be appreciated.
-
-
If there is too much overhang on a dump and you place the hinge to far back, when dumping the tailgate will hit the ground on some. If you pave with the truck your tailgate will hit in the paver and lift your ass end up off the ground negating the trolley brake and send you rolling outside, dumping your load in front of the paver thus you will have a bunch of pissed off laborers who have to shovel it up.
Anti freeze coming out of blowby tube
in Engine and Transmission
Posted
We are planing on pulling the pan and do pressure test. I can not remember that while doing the pressure test what the problem is in relation to where the antifreeze is coming from like outside the liners or inside, if this makes sense. What I can't understand is why does it come out of blowby. Pulling pan this weekend. Thanks