Jump to content

mackdaddy

BMT Benefactor
  • Posts

    702
  • Joined

  • Last visited

  • Days Won

    16

Posts posted by mackdaddy

  1. I have taken some of my restored Macks to different shows. On occasion an informed Mack guy will comment that my mudflaps are on opposite of what they should be. They state that the dogs should be looking in at each other. One person said that Zenon Hansen laid down this law. But he did not come on the scence until the early 60's. So what is correct?

  2. thats a good looking truck, I just bought a b73 and It has a tahograph ( or what ever it is) in it, what is this thing used for? Its a b73 1960 model. It has a 220 cummins, you say that that box in the middle of the dash is there from the factory? I have sent in to the meusem for info on my truck. I am curious. Was the power steering very popular in the b73? I would think that big of a truck would steer pretty hard.

    Fred

    Here is a pic of the interior. Note the thin steering wheel.

  3. Hi Mike

    I was going to try that but there is almost no room to get up in there. But I just need to get under it and try harder. As for the G model. It is there looking for a new home. I just don't have the room to store it. Let me know if you or anyone else may be interested. What about that steering wheel? Have you seen them like that? I should post an interior pic.

    Dan

  4. Hi

    Every once in a while you find a nice original low milage truck. This 64 B73 model is all there. It has a 250 Cummins, Quad box, Dbl frame, and approx. 220"WB. The steering is factory power. One unique feature at least to me is how thin the steering wheel is. Was this because of the factory power steering? and they decided to give the big boys some more belly room? The truck has no factory tach or speedo. They are in the 2 factory installed tachographs. The dash has a plate to fill it in and a nice big pyrometer in the middle. Only issue is the aux is stuck in direct and I think I will have to take the back end off the trannie to get to it??

    The cab hs the sunken floor board. Is there new sheet metal available for these cabs?

×
×
  • Create New...