Jump to content

Hobert62

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,971

  • Joined

  • Last visited

  • Days Won

    18

 Content Type 

Everything posted by Hobert62

  1. Hobert62
    I turn the front yoke 2 1/4 turns for the hub to go around 1
  2. Hobert62
    I don't think it has them. The one side I know just has a nut against the axle flange. The other side has a drain plug in the end of the flange and it may but it doesn't come out very easy.
  3. Hobert62
    I took it out of my 1963 b67.
  4. Hobert62
    I just measured and it does only have 6" lining. It has a 7" drum on the one side but both sides have 6" lining. It's from a 1963 b67 single axle tractor. Is there a way to tell if it has the centering cones?
  5. Hobert62
    Trying to help a guy out with a gear swap. I first thought the rad 5291 stamped into the axle housing meant it had a 529-1 ratio. Then I found all the other numbers stamped into the carrier section of the rear. Please mack gods help me out with the ratio. Thanks.
  6. Hobert62
    I'm from central pa if you would be looking for a road trip. I have the rear out of my B that has 5.29 ratio, 22" hubs, and s-cam breaks. I could give u a really good deal if u can get it before winter. Send me a message if u want to talk. It's nice to see old trucks still being used these days.
  7. Hobert62
    Thanks. I found stainless ones online for $57 a side. And I'm thinking of ordering a set.
  8. Hobert62
    I don't meen the mirror itself. I'm talking about the bracket that bolts to the doors. I never really paid attention but from pictures I think mine where replaced with a replacement set and no longer original. I found the grote ones that appear very similar to the ones already on the truck and was just wondering if anybody had any experience with them.
  9. Hobert62
    Has anyone used Grote 22013 universal ones? They look very similar to the ones on mine.
  10. Hobert62
    I'd buy a calendar.
  11. Hobert62
    I usually hear race coverage on Sunday nights from him. We both get done delivering about the same time a got a pretty good ride back to the yard. This Sunday he made peices though. Water in the oil and little people inside with hammers trying to get out. I think his race reports stopped for a little while.
  12. Hobert62
    I'm not sure what part of the world your from but I have the complete rear out of my single axle b-67 with s-cam breaks I'd like to sell.
  13. Hobert62
    Nice! Blower, turbo, nitrous??. Sorry for my lack of knowledge on drag racing. He only runs "mod". Not "pro mod". He looses enough at 10.5 sec no need to go faster.
  14. Hobert62
    No I don't have a big rotisserie just an iPhone.
  15. Hobert62
    That I'd a much better deal. The guy around here is high on some stuff and pretty decent on others. I gave $400 for a 100 gallon sterling tank, but only $100 for a 5-wheel. I should of had you bring me a tank along in with you.
  16. Hobert62
    Found you 2 70 gallon sterling tanks at a local truck junk yard with steps and brackets. Only prob is they are $500 each.
  17. Hobert62
    Beaver springs isint that far just no direct route to get there. I have a buddy that runs pro mod with a camaro. Are you staying at the track? Or will you get a room somewhere?
  18. Hobert62
    I took a set off my B67. I was running out of the drivers side and i never had fuel in the passenger side. Im not sure but theses may be longer then your looking for. They extended behind the cab. I'm in central PA 17830
  19. Hobert62
    Thanks for the input. This site is full of knowledge and I really enjoy reading the posts. The trailer and tractors weighs around 17,500 so it's not like I'm going to be very heavy. I'm just going to keep my B-67 a 67 and play with it how it is. Some day I may just happen to stumble across a 61 for another toy.
  20. Hobert62
    I really appreciate the input. Most of what I'm hearing is stuff I already told myself. It just sinks in a little better when you hear it from someone else. Thanks.
  21. Hobert62
    Moving the cab & adding the longer hood was just an idea. I'm gathering parts right now so when I start its all ready to go. Do the 42 & 61 models have the same length noses? My engine runs pretty strong for what it is. But a little more power is always fun in a toy.
  22. Hobert62
    How rare are the manifolds? Also by moving cab back i think it would give me enough shifter room that I could make a bigger jump seat so my 2 sons could ride with. They are already arguing who's gonna ride with. They are 5&7. My cab is in pretty solid shape. I already have a cut off to ad air ride, better gears, and stretch it out abit. We are going to use it to pull my 28' gooseneck and haul our antique tractors.
  23. Hobert62
    Thanks, I didn't even think of the front cab mounts. I looked at rears and didn't even think of the fronts.
  24. Hobert62
    Thanks that's what I thought from looking and comparing mine to the R. I may have found a the front end from a b-42. Can I switch hood and fenders to my cab and radiator surround? Would that move my cab back far enough to use the R's bell housing?
  25. Hobert62
    I have a 1963 b-67 with concave cab. It's a 673 non turbo. Was a turbo an option? I found a 250hp 673c from an r model. Will it fit? I'd have to use my bell housing to roll towards the passenger side so it fits in the dog house. will the manifold and turbo clear the hood/ fender? Thanks

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...