Jump to content

Hobert62

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,971

  • Joined

  • Last visited

  • Days Won

    18

 Content Type 

Everything posted by Hobert62

  1. Hobert62
    I was really disappointed when I first saw this. Really nice pictures in all but still disappointed. Then I scrolled down a little further and it all got better again.
  2. Hobert62
    Thanks. That's kinda what I was thinking. And I haven't got to the bumper yet.
  3. Hobert62
    Here's a marmon in pa on craigslist for awhile http://harrisburg.craigslist.org/hvo/5608747211.html
  4. Hobert62
    I'm saving this post! That may make wife happier with what's in my b67
  5. Hobert62
    I broke the end off one while removing the radiator last week. Thought about just welding a bolt to the end of it and calling it good enough. Mine are all bent like pretzels in different directions so I thought about just making a new set. "I'm kinda weird about things being the same from one side to the other". Any pictures of them from a b67? Are they nice straight rods or bent like this for a reason.
  6. Hobert62
    Talk that guy into making a calendar. I would gladly pay for one, and I'm sure quite a few others would too.
  7. Hobert62
    Front seal is currently a "national 411275R" It's outside is 4 1/4"
  8. Hobert62
    Do a quick ebay search for aluminum or stainless air tank. A bunch of new stuff shows up for a decent price
  9. Hobert62
    Yes you run the truck pretty far to have something that gives you a funny feeling.
  10. Hobert62
    Ok found the motor mount rubber thing at watts for $60
  11. Hobert62
    2 more questions. Why is the fan not made symmetrical? What do I have to do to change the front motor mount? Do I just replace the rubber or do I have to find the entire cast piece that bolts to frame? Mine is shot and the motor is just sitting in the bottom of it, with some marks where the pulley rubs the crossmember sometimes.
  12. Hobert62
    Are you sure the noises are getting louder or is it just your head playing games with you after reading all the stories about how the old tranny won't hold up? I know the voices in my head are pretty damn presisten some times.
  13. Hobert62
    I did look at Barry's on my phone but didn't see anything. I think they had the rear one listed.
  14. Hobert62
    Ok thank you. I figured it shouldn't be to hard to come up with, but wanted to make sure before I dug in to deep
  15. Hobert62
    How available is the front crankshaft oil seal for my 1963 b67 with a 673 na. Mine leaks when the truck is running. So while front is off truck and I plan on replacing hoses figured I'd just pull radiator and replace seal. I haven't check into it alot but figured I'd ask here first.
  16. Hobert62
    I agree with all the rest. It's been about 15 years for me and I'm only 1 hour away.
  17. Hobert62
    The name sounded familiar but I couldn't remember from where.
  18. Hobert62
    I think that's a Pennsylvania coal hualer special edition. Light weight model.
  19. Hobert62
    http://harrisburg.craigslist.org/hvo/5593560690.html
  20. Hobert62
    http://harrisburg.craigslist.org/hvo/5589394430.html
  21. Hobert62
    Did you get a box mounted? Just courious how it turned out for you.
  22. Hobert62
    X3. I like the aluminum radiator/grill surround
  23. Hobert62
    Land scaping around a garage? Isn't that what roundup was made to take care of?
  24. Hobert62
    Front fenders had lots if previous body work over there life. Some with fiberglass some with bondo and some with pop rivits and patches. I took the da sander and smoothed everything out with 80 grit paper. Then went to harborfreight to grab a gallon of their truck bed coating. I finished it about 3am this morning and I'm very happy with the results. It gave a nice finish kinda like a vinyl top on a car, helped hide the body work imperfections, and gave a nice uniform finish. As a bedliner it would be a joke but as a heavyduty paint I'm happy with the results.
  25. Hobert62

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...