wilbur

Does it only do it when its hot and humid out?  Mine did the same and they put a new file in it called a Smoke file, but the mileage got so bad I had them put the old file back in it

Have to look for ya next time

Nice Thank You

Wow Sorry didnt know that,

17 hours ago, storkmack said:

Since we have completely hijacked this thread.  I called Mark the other day and asked if he could get some loads to Lowell “ yeah, got 2 pulling into Thornton now” can’t beat it.  Stop in some time, I was the one taking a pic of ya going by the other day.  

Was the truck Clean?  Post the pic?

On 4/9/2021 at 12:22 PM, Hook n ladder 1 said:

Some of my customers use Sid occasionally.  It's like ordering Dominos pizza.  The load shows up with in 30 minutes.  I said I can't do that, call Sid again. LOL

 

Who do you haul for? What Truck?

On 11/19/2016 at 6:40 AM, Phill said:

Hi have a 2015 superliner with 600hp can someone please tell me how to get the idle up a few revs so i can use the sir con of a night and dont glase the bore until the boss can get bunk aircon in

Thanks

Phill

2015 Superliner? They quit making them in like 1992

You have to have all Brakes released to work

Put in a word for me.  708 417 4920 , Thanks

On 2/16/2021 at 8:32 PM, storkmack said:

25 ton! That’s nice.  

Does Stark ever have outside trucks bring in stone? Hook me up?

On 2/17/2021 at 8:02 AM, Hook n ladder 1 said:

Wilbur are you the one that Danny is always up your ass for being able to get 25 tons on?  

Yep thats me

Did anyone happen to click on the Link?

I had a message on here and opened it ,this is what it said unbelievable  Copied and Pasted.

Hey. I'm Elsa. I'm 35 years old. I broke up with my boyfriend 6 months ago. Since that time, there has been no sex in my life. I'm looking for a man. I look forward to having sex at least once a day. Register using the link below and write to me. My nickname is sexyelsa41

Why Thank you.  I shaved off 400 pounds with that exhaust.  I can get out of quarry with 25 ton

I probably talked to ya in the quarry. I got the white ch with silver flames.

On 1/18/2021 at 6:09 AM, storkmack said:

Ready Mix Plant   NW corner of Sauk trail and State.   Officially South Chicago Heights.   We bought what was Miller Ready Mix.  

OK Stark redi mix  What do you drive? next time I go by there I will look for ya and say hey. I always go that way on my way to M+K right down the street.

On 1/15/2021 at 9:49 AM, storkmack said:

Those look nice.   I’m down in Chicago Heights everyday.   Starting plant renovations Monday.  

Where at in the the heights? Thats where I live.  Must be the steel plant off of east end

Does anyone know the torque for the front spring  shackle bolts on a 2000 CH.?  Its the bolts that pinch the aluminum shackles on the spring pins.  Thanks

Thanks Swishy Thats what I did on the one that wasnt too bad I center punched it real good and used the green loktite brg retainer stuff. I might try the JB, I use that on the Straps when I reuse them.   Thanks again

Is there a way to have the inside of a yoke knurled to tighten up the bearing caps? other than cut it off and weld on a new one. Anyone have a solution for this.   Thanks

Thanks fjh

The 8  5/8"bolts holding the housing to the block calls for a torque of 170#  I read the torque wrench wrong and put 190 on them.  Should I replace the bolts or will it be ok.?   Thanks

To use between the bell housing and block.?  Its a 2000 E7 460.  Last time I put a clutch in was about 15 yrs ago and I think I used that Mack Grey stuff. Is there something better? preferably in a 14oz. tube to use in a gun     Thanks

The Diesel Store has the best price on EUPs

Never thought about the wheel being good for 9,000#.  What if I bought 9 x 22.5 wheels with a 0 offset and the 315/80 tires would that work as a super single on a 22' dump trailer.