Quickfarms

It is really sad that some people are so superficial that they will judge you based on the clothes you wear. Early on I learned that a lot of the people with real money do not dress flashy. In my line of work I am often called to be an expert witness. One day a lawyer called me to schedule a meeting that day, I told him I was in the field but could meet at the end of the day. We arrived at his office and the receptionist was not happy to see two sweaty guys in work clothes.

If you are looking at used trailers the 102" deck width is much more user friendly than the 96" deck width. I second all of the points above Personally I will end up with a step deck with air, or hydraulic, assisted ramps or a hydraulically lowered tail

Just put her on the boat and... Where we supposed to pick that boat up?

Stavola, that's a name I haven't heard in decades. Are they still running yellow Mack's with black fenders?

SCA? Never heard that before

360 k ? What do you do with those antiques?

The small diameter tank, no air tanks under the battery boxes, black fender extensions, bid front tires all help with the look

https://www.ebay.com/itm/Mack-1936-truck-flat-bed-with-winch-very-clean/333311677306?_mwBanner=1&ul_ref=https%3A%2F%2Frover.ebay.com%2Frover%2F0%2Fe11070.m3698.l1120%2F7%3Feuid%3D1efe6282fdc249d9a25612376450ac40%26bu%3D43123500943%26loc%3Dhttps%253A%252F%252Fwww.ebay.com%252Fulk%252Fitm%252F333311677306%26sojTags%3Dbu%3Dbu%26srcrot%3De11070.m3698.l1120%26rvr_id%3D0%26rvr_ts%3De434378b16c0aa486a758ab0fff562eb&ul_noapp=true&pageci=2026fc95-3639-441a-9fe9-2f82e07652d8 The new listing

Too much air in the front bags and dump the rear bags

When my wife tries that I just hand her half of the bills for the house and tell her that she needs to pay her half and it ends there.

Is it different for Hayward Mack's?

A evaporator core full of dirt and dust can cause a similar condition. I have had it happen in several vehicles where the AC would work fine then after a while stop. But if I went to lunch it would work after lunch

I have two craftsman, Poulon, saws that are about 20 years old. They are good but the chain tensioner sucks. And no vibration dampening gets old. I now have a 36 volt makita and I like that Saw. No gas, starts instantly and lasts a long time i bought it for the 4 batteries and double charger and basically got the Saw for almost nothing

Are the frame rails one piece or is that a z bracket in there to do the offset? Tulsa Equipment used to convert trucks using what they called a z bracket to keep the rear frame at standard height for a fifthwheel. What front axle and transfer case are in it, for that matter what are the specs?

Will this make you drool