stutz 712
-
Posts
53 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by stutz 712
-
-
I had trouble with cab tilt on a Cruisliner a few years back. Blowing lines and pumps and no tilt. Even replaced a cab lock cylinder to no avail. Finally started pulling cylinders and found broken seals on the end of the cylinder rod causing it to dead lock. I know you said cylinder is new but may be worth checking
- 1
-
-
Ok thanks
-
Looking for driver side exhaust bracket for 83 Cruisliner
-
Ok. Let me know when it works. Not in a hurry. Thanks
-
Also looking for driver side exhaust stack mount for a Cruisliner
-
I have not!
-
I use to run a 1984 MH 613 with an E9. They are good trucks and the cabs will be around a long time. Quite a few of them around as parts trucks. Lot of frame parts same as superliner. Now working on a 93 MH as a show truck
- 1
-
-
What kind of L model parts do you have?
-
Looking for nice aluminized MH bumper
-
How much are you asking for these parts?
-
Does anyone have an air line schematic that shows which port on the 13 speed shift knob connects to which ports on the T2130?
-
Looking for mh grill pieces.
-
Pleas send me pictures if you would. Text to 724 840 9135. Thanks
-
Would you take 100.00 on the wiper set up?
-
Where are you located?
-
Anybody have a good t2130 transmission?
-
Looking for Black gauge panel with circuit board for 96 CH 724 840 9135
-
I pulled the rear budd hub assembly off my 59 B73 and was surprised to find a inner wheel seal between the outer bearing and the inner bearing. What is the purpose of this? Any reason why that can’t be eliminated and run only a new outer seal?
-
I had an 84 MH that had factory red seats in it. Pretty sure they were Bostrom.
-
Does anyone know where to purchase new windshield rubber for the L model cab?
-
Looking for pto for t2090 with direct mount dump pump 6 bolt or 8 bolt. 724 840 9135
-
Looking for Mack fuel tank bracket and strap for 22 inch diameter tanks. 724 840 9135
CL/RW/MH frame, CL hood, L model, V8 and other parts
in Parts for Sale
Posted
Do you still have the aluminum 24.5 wheels?