s13muskrat

In our fleet we have mp8 m7 and aset engines. What i need is a list of specialty tools to start doing the injector and injector cup jobs. Any info will be much appreciated.

Im haveing alot of trouble with the dpf system on this truck and i have 3 other trucks just like it. They all have a loss of power and when i plug up to it with v-cads pro it show soot levels high. Bruckners says that the particulate filter needs to be cleaned and that they take them off and send them to peterbuilt cause they have the mechine to do it. Idk if its somthing im missing on the pm or what. So when should i change out/clean the particulate filter?

Relocated?

Im working on a 2010 volvo d16. Driver said she was pulling into a truck stop and push in the clutch and she herd a loud pop. now the cluctch is stiff has trouble going into gear, no jake brakes and no cruise control. they are not in the yard yet so i kinda wana have an idea on where to look.

Im working on a d13 volvo. It keeps pulling up fault codes for a nox sensor open circuit, and another code for nox sensor faulty component. One i dont know where the nox sensor is and two idk how big of a job it is? Just wanted to make sure im not going to get into anything to big.

Ok our fleet runs alot of Volvos, and as of late I have been having major trouble with the kingpins going out. Trucks are always out of alignment and istay up on the greasing on my end. We have our alignments done by 3rd party (idk if they are just trying to get money out of us orwhat) but then again i dont know much about the wear and tear time on these things, like how long they should last, how often should i be changing these out? Whats the PM I should be doing on them?

Ok it was the oil pressure sensor. I replaced it and all is good now thanx for the help people!!!!

Ok pulled the plug gauge reads 0. I have a sensor here so ima replace it and see what happens.

Ok Ima go take some things apart. Ill let you know what i come up with.

Im working on a 07 Mack chu613 mp8. When i turn the key on (not starting it yet) the oil presure guage pegs out and doesnt go back, even when i start it. Im hoping its not the guage itself because on this unit you cant just replace the guage, the whole cluster unit has to be replaced. Was also thinking it was the oil presure sensor? Any ideas?

Thanx man that helps alot. Ima try it out tonight at the shop and see if i cant fix this truck. check engine light comes on then goes off, on off on..... Yeah...

Has anyone ever used tech tool or vcads for mack and volvos? I have it here at work and i dont know how to check inactive or active codes.

Hello names Eric. Im 23, Ima diesel mechanic a Frac Tech in Chickasha, Ok. Im in school now to get ASE certified so im still learning alot and have a long ways to go. Im here to learn as much as possible about the world of trucking and what it takes to be a master mechanic. This site looks like a good place to learn and stay up to date on things going on. Looking forward to what im going to find.