mp8_macky

Avoid emulators at all cost. You will have lots of issues with them. I did think they could be more cost effective solution than tuning, boy I was wrong... Do a proper DPF delete tuning on your Mack and you will be good. Again, I am mentioning company that saved me from bankrupt almost 10 years ago (a little less). https://truckecmtunes.com/mack-dpf-egr-def-scr-delete.html Direct link to web site https://truckecmtunes.com/

Don't go with the emulators, they are worthless. A lot of time they fail, cause circuit issues. Overall it's a waste of money. Go with proper ECM delete tuning for Mack. I recommend my vendor. https://truckecmtunes.com/mack-dpf-egr-def-scr-delete.html

like about million different things. check your truck for fault codes and that's your start.

i wouldn't go with emulator because it only takes care of filter, and leaves egr on. also every person i know had nothing but bad luck with them (failing quite often). i use ecm tuning on all of mine, and they've been doing great.

that's bullshit. i've done all my mp8s with def (2010-2013 years), and they've been running as good as the ones with no def. i said many times, the only source that has been working flawless for me is https://truckecmtunes.com

one of my customers had exact same problem with mp10 few years back, issue was a bad delete. exact same thing, it would just shut down after 15min you have to use a trustful source of delete tunes

i did warn people that not every delete is the same, and there are a lot of bad deletes. the egr must be blocked off with 2 steel plates, if you don't do that you will still get exhaust into your intake, and soot will build up, vgt will get sticky and fail a lot sooner. bad delete companies usually say that you dont have to block the egr off, some even say you can leave filters on - that's crazy. stick with a good supplier of delete program! as i said for million times here on the forum, i personally use and i forwarded at least a half a dozen of forum members to https://truckecmtunes.com everyone is very happy, and i run my first delete 5-6 years already with no issues.

emissions are dpf-egr. they are terrible. i almost went bankrupt with them. my salvation was deleting it, and since then i've been running the same engine for 5 years (close to 700.000miles) with no major issues. for emission delete check https://truckecmtunes.com i am very grateful to them, since they saved me

when it comes to diagnostics, there is a gold standard on volvo and mack (mack uses volvo engines). the program is called ptt, premium tech tool. with that program you can read codes, do diagnostics test (injector cut out, cylinder balance...), and even do ecm tuning. along with ptt you need diagnostic adapter i personally use nexiq usb link (around 700$) this nexiq usb link can work with original cat, cummins, detroit diesel program, so it is a handy tool

great story! thank you!

First step to address to when having low power issues is checking intake for leaks Also when it comes to deletes i've been using https://truckecmtunes.com for 5 years already, i've never had a single issue Keep in mind that there are a lot of bad deletes floating around

i can't stress enough how many emission related issues i had! the only way to get them run right is deleting the junk! i already wrote here before about it, i was close to bankrupt with all the bills building up. the guy who i can highly recommend is https://truckecmtunes.com

the only way to get thosse us10 and us07 macks running right is deleting them. i did my entire fleet and zero issues since then. god knows how many times i was pulling my hair because of those fuckers. i recommend this company https://truckecmtunes.com

try resetting the codes with a code reader or ptt program.

bad actuator could cause rough idle. what's the power like?

these motors are great once they are deleted. their biggest issues is the emission system which almost led my company to bankruptcy. it was terrible. one day it is the doser, the other day it is the sensor... when i did the delete i started breathing again, i can't thank the guy enough. be aware there are plenty of them claiming they can do them, but not a lot of can do them right. the only once that i know who do them right, are the same guys that did my entire fleet. i run these deletes for years now, and never had a single issue. i personally vouch for them. it is https://truckecmtunes.com/

i agree on boost leaks. those manifold know to crack around bolts holding them. do pressure test and check it visually for any cracks. also what you guys should do from time to time is cleaning the boost pressure sensor, if the truck is not deleted it will even require this cleaning more often.

Mack ECMs have to be programmed for either manual or automatic transmission to work properly. I fixed same issue (using deleted ecm from manual trans truck on a truck with auto trans) by reflashing with proper tune. It was done by guys I use all the time, and can't thank enough for solving all my issues https://truckecmtunes.com also regen switch can be disabled in programming parameters in ptt

those macks with square connector are a bitch. they can't delete egr on it, and it is a pain in the ass to have a good delete. unlike the ones with round diagnostic pin (both 6 and 9 pin), i have entire fleet of those deleted and it is the best thing i ever done.

Dang I just saw this. I am not very often on forums sorry. I get here from time to time, and inform people about all issues I had and sovled them. Any how I had a problem with oil leaking into ECM and shorting it. So do the preventive checks. I didnt cut any filters to look for metal but you can do that, if you find metal - you are toast (engine rebuild is about to happen).

I gave up on struggle with emissions. Tried baking filters, doing preventive maintain of systems - nothing helped. Check these guys out they saved my business can't thank them enough https://truckecmtunes.com I am talking about trucks not about machines

They do know to be a pain in the butt to remove. Sometimes they got stuck real bad. I fixed my issues with deleting them. I recommend https://truckecmtunes.com

I recommend that you check EGR valve that can also be an issue, if it is sticking. Do you check for codes? Try cleaning the boost pressure sensor (i doubt that it will help, but you can try).

yes i did block off egr. it must be blocked on intake side too the tuner requested that

we had all of sort of issues like this until we deleted it. will repeat once again we used this guy https://truckecmtunes.com it saved our company!