Jump to content

880joe

Bulldog
 View Profile  See their activity

  • Posts

    498

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by 880joe

  1. 880joe
    New engine wiring harness but the sensor shim may be the problem because I changed ecm off another truck and still had problem. How do I check to see if sensor is shimed correctly?
  2. 880joe
    Ijust put new remack engine in my truck when I ordered it I used vin# off truck I have with a 427 so it would have different cam key I took out 355/380 now I'm getting 3-2 code when you mash the throttle about the time it starts making power it cuts out and throws code let off fuel malfunction light goes away runs good as long as you're not really putting it under a load. Am I getting this code because ecm is trying to read old cam setting? I replaced cam sensor and it makes no difference
  3. 880joe
    I do have a nice 60 inch able body stand up with dual exhaust cut outs that I may consider selling.
  4. 880joe
    No it's sold
  5. 880joe

    2001etech

    880joe replied to chuck237's question in Mack Truck Q & A

    Probably just bad oil cooler
  6. 880joe
    I don't know on an RD but on a CH it's under the dash near the steering shaft
  7. 880joe
    You might check at Mack in Quincy IL I was there the other day and they had a new hood in crate and a hood from a Thompson truck out behind the shop
  8. 880joe
    Inner fenders may also be different might be worth looking into if you're not getting a complete hood
  9. 880joe
    I think the newer hoods are a couple of inches longer. However I did set an older CH hood on CHN just to keep engine covered up seemed to open and close ok but hard to tell about cab and hood gap because of flat cab air bags
  10. 880joe
    The guys at Switchblade Turbo built me a new turbo supposed to be correct size. They said the other one was to big still don't know why the 171702 Borg Warner was to big for my engine when I've heard of numorus others running that same set up. Will update after I get it put on and see how it performs.
  11. 880joe
    Didn't come with injectors or jake or any external bolt on pieces eup's,starter,air compressor,and such
  12. 880joe
    I have an 01 doing the same thing anyone know where the alarm buzzer is located so I can unhook it
  13. 880joe
    Mack was 17500 Capital reman was 12500 on etechs
  14. 880joe
    Thank you for the input
  15. 880joe
    The bigger injectors will split I know I have split probably a half a dozen or so
  16. 880joe
    To keep steering wheel holders from tearing out transmission and rearends
  17. 880joe
    Anybody have any experience with Capital Reman out of Colorado? I was checking on new engines and they are about 5000 cheaper than what mack wanted for a rebuilt engine.
  18. 880joe
    I would buy one and know another guy that said he would also
  19. 880joe
    I will look and see if I have one
  20. 880joe
    It's a RS686LST. I'll try to post pictures but usually don't have much luck at it
  21. 880joe
    I will have to check I know it's not regular R model
  22. 880joe
    I can get some but may be a while truck is about 20 minutes from the house. I'm usually gone during the week and busy with other home stuff on the weekend
  23. 880joe
    Would you be interested in a whole truck for parts with bad rearend and rusty frame 2 stick 6 speed and a 300 I believe 76 year
  24. 880joe
    Where in Arkansas are you located? I'm 50 miles north of Springfield Mo I may have what you need
  25. 880joe
    Are these trucks reliable or are they just a headache to stay away from?

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...