Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 06/16/2021 in all areas

  1. they are crude, but totaly worked. I cut my own gaskets to do the test and these caps did not blow bubbles during the test...
    2 points
  2. Bundle type oil cooler o-rings are still availlable... may i suggest pulling the oil filter pad and resealing it as well. you are already there. ... also you can make 2 simple little blocking plates to pressure test the oil cooler.. I did this a few years ago. I used 1/4" aluminum flat stock... I made 2 caps. In one of them I tapped 1/4 npt threads and installed an air compressor nipple.... The test is done at 80 P.S.I. in a tub of water. I did this on an E-6 2 valve that I am building. In my case, My oil cooler was good... Jojo
    2 points
  3. Update. 95 percent sure i got it fixed. Found 2 wires going to the vecu that has bare spots . Looked like they were rubbing on the box bolted to kick panel. Fixed wires. Taped everything up and drove it across a rough field and it never cut out. Thanks for all the ideas and help.
    2 points
  4. Mrs Mack, Miss Molly and I went for a visit to covid town (Melbourne) Fairly quiet down there, grabbed a old van body and chucked some other stuff on to fill the trailer berfore launching Mrs Mack for home when it was well and truly dark Filling up with motion lotion at Calder Park Miss Molly having a toilet break with the little van body on the back Been supervised by Miss Molly, dunno if Im doing a good job or not Miss Molly Paul
    1 point
  5. Mack b-813 has a blown up Mack endt 673 engine with a quadbox trans and 58 rears 24” tube type tires the truck obviously has a couple thing wrong with it but if someone has a Mack motor laying around it could be a good project has a good clean title Located in Howell New Jersey $2000 obo please text 7329397494
    1 point
  6. made the same looking plates years ago, tells you real quick if you got it sealed up!
    1 point
  7. I assume we will gather at Watts at noon on Saturday to document our aging process😎???
    1 point
  8. I’m planning on being there Saturday. Photo at noon at the Watt’s tent as in years past? Dave
    1 point
  9. I have made them for cat, cummins and DD but have not for a mack cooler.I learned many years ago when you can test dont guess.
    1 point
  10. 1 point
  11. I rode Harleys for years and I never really cared for either one of those items we’re both very uncomfortable to ride with… Maybe Some of these fools didn’t realize how uncomfortable both were until they were bought and paid for and installed by then it was too late to return them ha ha … bob
    1 point
  12. In Atlanta, starting bid $4,500. Looks pretty rough but you sure ain't gonna find many of these for sale! https://www.ebay.com/itm/144070295088?hash=item218b423e30:g:M4IAAOSwkFBgwUsD&vxp=mtr
    1 point
×
×
  • Create New...