Jump to content


Popular Content

Showing content with the highest reputation since 03/15/2019 in all areas

  1. 16 points
    My 88 we just restored ..just wanted to share with you guys
  2. 13 points
  3. 13 points
    This was my wife's wish and I said I will see it through. Equipment, house kits and tradesman are set to go, everything is mapped out both plat wise and legally. 23 disabled Vets and their families are tentatively chosen to be given the first homes. I will not take stupid "green" requirements by some power mad town employee. Monday I will be at the local news channel and start my push back and get my vets homes or I will bankrupt the town.
  4. 11 points
    Came home from a Fishing trip to find a box from Maine. In it were cans of Moxie soda, an invasive species in these parts, compliments of BMT's resident philanthropist 41Chevy. Since everyone who tries it (social media) seems to feel inclined to comment I'm throwing mine in too....... Moxie Virgin's stop now if you don't want the spoiler. Brought the cans to a steady 38 F and cracked. Scent is perfumed and pungent similar to a Mennonite store that sells bulk spices. Flavor strikes a memory of dime store candy sticks...… more specifically a softer version of Horehound. Aftertaste is the tricked-out part of the soda. After 15 seconds the sweet dissipates and a dry bitter sets in and holds on. Unique. Stuff is a 10, salute to the Northeast for good craftsmanship. Regretfully, no availability in Wisconsin for the near future. My wife agreed we are keeping the last can (toast) till Paul has a victory over Virginia's "A-Holes".
  5. 11 points
    Raining pretty good when I snapped the photo yesterday morning and the decal is obviously aged but it's fitting: The caption reads: When America is Bankrupt and Lady Liberty Falls, Who will the Democrats and Media Blame?
  6. 11 points
    My son and daughter in law went with me but went in first, dressed in their finest NY Yuppie garb.I strolled in a few minutes after them and sat in the back with my camera. During the public question part, they asked how hard would it be to get a permit to convert their 4 car garage into 3 apartment units. Any issues with energy requirements and and issues about who they can and can not rent to. The answers were that there are no rules on green energy and as long as the spaces are issued a C.O. any one that you choose can live there. Son asked again if they plan on any green laws or occupancy requrements in the future and again the answer was no. When the meeting ended i walked up to the Village Supervisor and the head of the zoning board and thanked them for the fantastic video and also thanked the Head of Zoning for leaving me the reasons for denying my permit (60% solar and open residency not just veterans rule) on my answering machine. Told them I'll see you either on the TV news and in Federal Court for Discrimination against Handicapped Veterans unless you met my terms when I decide on them. The members were following me talking to me but for some reason they all scattered when I got into my dump truck and started to leave. Most enjoyable day I've had since my wife passed away
  7. 10 points
    I was in the right place at the right time this morning and got this video of a buddies LT hauling his D6 I believe. There are still a couple of working old Macks left in CA. Not many though. LT w-D6 video.MOV
  8. 10 points
    I just wanted to give an update on my R770. I have everything working as it should, Cleaned and painted frame and hubs. Repurposed some tires. The ones on the truck had lots of tread but were badly weather checked from sitting for 16 years . After a polish, this is what I have. A side note about the flags. The previous owners wife would hand sew flags for her husband. There was a stack of them under the seat, so I thought I should be showing them off ,and sharing the story.
  9. 10 points
  10. 10 points
    Never plan on being a stoner, don't smoke, seldom drink and it fascinates me...…………….Stoner dude sits at home smoking state-approved weed & eat'in Cheetos, Democratic politicians boast whimsically about how many drugs they did in college, the companies CEO has a chrome box for his nose candy and Mr.BlueCollar is told "stay sober, clean, and your going to piss in a cup if you wanna get paid (or score a job)".
  11. 9 points
    Some history from this side of the Pacific about you blokes on that side of the Pacific Paul
  12. 9 points
    Making a delivery of new Mack LFT trucks.
  13. 9 points
    Hey guys/gals! It’s been a while since I have posted in BMT. Not since shortly after our CL753 build. I hope all is well with you all. I am back to share another build I am beginning. If you guys remember, my father and I restored a green Superliner about 5yrs who, and then a yellow CL About 3 yrs ago. Any way I have a new project, something bigger and wilder than I have ever done before. Finally got the RD854 my dad always wanted . It’s unfortunate he isn’t here to help me on this, but my uncle and I plan on doing this one in honor of him. Sent from my iPhone using Tapatalk
  14. 8 points
    bought the peterbilts couple years ago from steve camerota of camerota truck parts in ct.
  15. 8 points
    My friend found one of these pics on social media, so I figured since they have been also featured in the Canadian Bulldog Magazine back in the day I would post I may as well post my good friend's and his fathers old Mack's. The E9 V8 Superliner was a show and shine winner at El Rodeo Du Camion in Quebec. And the R pulling the float trailers had what he built as the very first auxiliary power unit around here back when there was no such thing. He put a Vauxhall engine in the side saddle storage box that charged the batteries, pre-heated the engine and wet line hydraulic oil tank and provided climate control in the cab when parked.
  16. 8 points
    Here’s what I threw together with some scrap laying around. Solid and portable, not really a working stand but good for now.
  17. 8 points
    Mauro family 1955 Mack LJSWX dump truck and 1965 B-87 tractor at the Bolton Fairground.
  18. 8 points
  19. 8 points
    Hosted on Fotki
  20. 8 points
    1984 brochure photo at the test track.
  21. 7 points
  22. 7 points
    Just over 1100 miles one way with my Marmon and M172 trailer. Hopefully 700 miles home with a new B
  23. 7 points
    Good deal on these straps, Tractor Supply. I saw a big Mack truck or two- I love watching Fox News on weekends. Happy Easter everybody.
  24. 7 points
    May as well post one of the 87 R Model's I hauled salt with too. This was a strong little E6 350. Grossed 140,000 pounds all it's life running 8 to 12% hills north of here.
  25. 7 points
    Newest addition 1958 B-81 SX
  26. 7 points
    I saw a big Mack truck this week. I saw Cleveland too- I loaded a load of steel there, it looked like this- Loaded at this place Going to this place in Daleville, Va. I saw a big Mack truck in Cleveland too. And some big orange machines- Saw this unit on a trailer behind a pickup truck going south on I-77. This is a cow. and this is a dog and this is a smoking hot babe sitting in the shower. And that's all i've got this week.
  27. 7 points
    The FN model was built in 1940-1941 with 150 being produced.
  28. 7 points
    But yes it is ironic, MT! Two places I'd loooove to see drug testing: unemployment line and welfare line.
  29. 7 points
    The D-series was built between 1955 and 1958. The 1955 and early 1956 models had a squared off grille, no additional trim pieces and no rear corner windows. The second styling added the contour grill with the fancier trim, corner windows as well as other updates to stiffen the cab. There were a total of 832 built. The unique way of accessing the engine was called the Verti-lift system. There was a mast behind the cab, similar to a forklift that contained one cylinder that was raised by a cab jack or an electric pump which was optional. The green one in the photo is mine. It is a 1956 D-42 that was purchased new for Sinclair in Tulsa, OK.
  30. 7 points
  31. 7 points
    Still have some finishing up to do but it’s getting closer to going back to work
  32. 7 points
    Making a CAT dozer delivery.
  33. 7 points
    Looks familiar https://www.duncanputman.com/truck-of-the-month/2019/april/
  34. 7 points
    Drove by this place for a couple of years but they were closed .I was to late or to early . Thought it was a scrap yard. Stopped this time and they were open . It is a Museum nothing is for sale .
  35. 7 points
  36. 7 points
  37. 7 points
    My photos posted here 2/28/2011:
  38. 7 points
  39. 6 points
    My nearest neighbors in Riverhead were living large off the state and would whine about my trucks, plowing fields at 7 a.m. and my dogs. Put antique plates on all of my hulks and put them on his property line, made a larger dog crap catapult for spicing up his pool and told the farmer who leased my fields to not turn in the rotten crops but put them along the fence line. No more issues after the local code enforcement said I was legal 100% and he was in violation for no C.O's on the pool, rear deck Gazbo, that his fence was on town property and the rocks he put on the edge of the county road were illgal and he was getting cite and fined to the tune of $250 per rock. Life is good. In Virginia my nearest neighbor is over a mile and a half away and the nearest in Maine is just under 20 miles away.
  40. 6 points
    There are still a ton of fords operating in St. Louis as dumps, mixers and roll offs. Here are a few from the past couple days. I love old workhorses rocking spokes.
  41. 6 points
    The new version is on the way but nothing better than the original style.
  42. 6 points
    Pretty decent looking truck. https://columbus.craigslist.org/hvo/d/martins-ferry-1989-mack-superliner/6868330745.html
  43. 6 points
    Like the truck and the steam locomotive on the side of the hood.
  44. 6 points
    We did another run this morning San Diego has blast but legs are killing me wife ran half marathon I just walked 5 K. But atleast I get out there bob Sent from my iPhone using Tapatalk
  45. 6 points
    Scored about 100 of old photos at a tag sale for only a few bucks. Here is sa few. Tony Dano Dircus
  46. 6 points
    Working trucks seen by the side of the road. Modern rig next to a flatback R tractor and an R 600 dump truck with the optional steel butterfly hood.
  47. 6 points
    I am old enough (68) to think sometimes that the young men today do not have the backbone the men of the "greatess generation" had. But then I meet a few young men that are or have served the country, and I am struck by the patriotism and courage of these young men today. All is not lost........yet!
  48. 6 points
    My old trailer: Little rusty in the rear: No photos but used the shop gantry crane to take the weight of the ramps while I cut them free and separated the pieces with the ramps hanging from the hook. Drove the gantry forward and set the ramps on the deck after getting some of the metal removed for access. the main frame where the crossmembers were pierced through was really rusty so I made an 8" square plate and clamped to the beams. I then torched the rusted area out much the same as a surgeon does during an operation to get back into good material: These are the rear ramps hinge pins. A wee bit stout no?: While removing the rear closing member, I found the left frame to be 1.25" longer than the right? Don't know what happened there during manufacture but that's a LOT of tolerance. After determining a 13 degree incline to the ramp approach I set up an adjustable square, marked everything as it should be, and shorted the left rail to match the right. There was enough clearance I took it off with my Milwaukee Portaband saw. Pretty straight for what it is and certainly good enough. Rails after straightening up: I'll pick up steel over the next week and get it put back together, then send it to be blasted clean for repaint. The trailer being 42' in length is heavy enough for me and pretty easy to get around with. No real reason to replace it as long as I can repair it. Kinda nice having the equipment to do the work too.....
  49. 6 points
    All done with about 200 h.p Loaded with Steel Plating
  50. 6 points
    With snow on the side of Main St, Marlborough, NH, this Sterling tractor briefly pauses enroute to deliver a Bucyrus Erie to the jobsite.
  • Create New...