Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 02/18/2019 in all areas

  1. 16 points
    My 88 we just restored ..just wanted to share with you guys
  2. 15 points
    Went to the state offices in Richmond today to get screwed over my blood pressure raised to critical and walking back to my truck passed a Model Train Hobby Shop. This was in the window. Very true to life if you ask me! Paul Hosted on Fotki
  3. 13 points
  4. 13 points
    This was my wife's wish and I said I will see it through. Equipment, house kits and tradesman are set to go, everything is mapped out both plat wise and legally. 23 disabled Vets and their families are tentatively chosen to be given the first homes. I will not take stupid "green" requirements by some power mad town employee. Monday I will be at the local news channel and start my push back and get my vets homes or I will bankrupt the town.
  5. 12 points
    "Momma" snapped this a few years ago when I was hauling fill for my shop property. This load, a few more just like it, and then 630 tons of fill sand were all carried by this ole girl. Lot's of people "rubbernecking" too. Slow and steady still gets the job done.
  6. 11 points
    Came home from a Fishing trip to find a box from Maine. In it were cans of Moxie soda, an invasive species in these parts, compliments of BMT's resident philanthropist 41Chevy. Since everyone who tries it (social media) seems to feel inclined to comment I'm throwing mine in too....... Moxie Virgin's stop now if you don't want the spoiler. Brought the cans to a steady 38 F and cracked. Scent is perfumed and pungent similar to a Mennonite store that sells bulk spices. Flavor strikes a memory of dime store candy sticks...… more specifically a softer version of Horehound. Aftertaste is the tricked-out part of the soda. After 15 seconds the sweet dissipates and a dry bitter sets in and holds on. Unique. Stuff is a 10, salute to the Northeast for good craftsmanship. Regretfully, no availability in Wisconsin for the near future. My wife agreed we are keeping the last can (toast) till Paul has a victory over Virginia's "A-Holes".
  7. 11 points
    My son and daughter in law went with me but went in first, dressed in their finest NY Yuppie garb.I strolled in a few minutes after them and sat in the back with my camera. During the public question part, they asked how hard would it be to get a permit to convert their 4 car garage into 3 apartment units. Any issues with energy requirements and and issues about who they can and can not rent to. The answers were that there are no rules on green energy and as long as the spaces are issued a C.O. any one that you choose can live there. Son asked again if they plan on any green laws or occupancy requrements in the future and again the answer was no. When the meeting ended i walked up to the Village Supervisor and the head of the zoning board and thanked them for the fantastic video and also thanked the Head of Zoning for leaving me the reasons for denying my permit (60% solar and open residency not just veterans rule) on my answering machine. Told them I'll see you either on the TV news and in Federal Court for Discrimination against Handicapped Veterans unless you met my terms when I decide on them. The members were following me talking to me but for some reason they all scattered when I got into my dump truck and started to leave. Most enjoyable day I've had since my wife passed away
  8. 10 points
  9. 9 points
    Never plan on being a stoner, don't smoke, seldom drink and it fascinates me...…………….Stoner dude sits at home smoking state-approved weed & eat'in Cheetos, Democratic politicians boast whimsically about how many drugs they did in college, the companies CEO has a chrome box for his nose candy and Mr.BlueCollar is told "stay sober, clean, and your going to piss in a cup if you wanna get paid (or score a job)".
  10. 9 points
    Some history from this side of the Pacific about you blokes on that side of the Pacific Paul
  11. 9 points
    Making a delivery of new Mack LFT trucks.
  12. 9 points
    Hey guys/gals! It’s been a while since I have posted in BMT. Not since shortly after our CL753 build. I hope all is well with you all. I am back to share another build I am beginning. If you guys remember, my father and I restored a green Superliner about 5yrs who, and then a yellow CL About 3 yrs ago. Any way I have a new project, something bigger and wilder than I have ever done before. Finally got the RD854 my dad always wanted . It’s unfortunate he isn’t here to help me on this, but my uncle and I plan on doing this one in honor of him. Sent from my iPhone using Tapatalk
  13. 8 points
    Mauro family 1955 Mack LJSWX dump truck and 1965 B-87 tractor at the Bolton Fairground.
  14. 8 points
  15. 8 points
    Hosted on Fotki
  16. 8 points
    1984 brochure photo at the test track.
  17. 8 points
  18. 8 points
    Folks, we need to give Barry Holden a big hand!! If you notice on the home page, he has dedicated a tab at the top of page to the B Model Registry. Once you click on it, you can get to the registry plus a lot more info that I dug out of sales literature. There is still more to send to him, so keep checking from time to time. The old web site that all this info was on was discontinued for some reason. I'm grateful to Barry for posting all this again so everybody can learn more about their ride. Sent a personal note to Barry and thank him for this addition. I have noticed the times on messages he has sent here and I'm starting to think he lives at Watt's Mack. Not often you have a employee willing to put in that much time! Over & out from Ignorant Ridge, Tom
  19. 8 points
    You know how it goes, just driving along on a mission, enjoying your own thoughts, listening to the music of a cool powered Mack, the whistle of that magic tip turbine singing away All this time big brother is watching you I am not complaining one little bit though Was stunned to see me on Facebook that night when I stopped So sit back, relax and have a good chuckle Paul received_350847202182842.mp4
  20. 7 points
    I saw a big Mack truck this week. I saw Cleveland too- I loaded a load of steel there, it looked like this- Loaded at this place Going to this place in Daleville, Va. I saw a big Mack truck in Cleveland too. And some big orange machines- Saw this unit on a trailer behind a pickup truck going south on I-77. This is a cow. and this is a dog and this is a smoking hot babe sitting in the shower. And that's all i've got this week.
  21. 7 points
    The FN model was built in 1940-1941 with 150 being produced.
  22. 7 points
    But yes it is ironic, MT! Two places I'd loooove to see drug testing: unemployment line and welfare line.
  23. 7 points
    The D-series was built between 1955 and 1958. The 1955 and early 1956 models had a squared off grille, no additional trim pieces and no rear corner windows. The second styling added the contour grill with the fancier trim, corner windows as well as other updates to stiffen the cab. There were a total of 832 built. The unique way of accessing the engine was called the Verti-lift system. There was a mast behind the cab, similar to a forklift that contained one cylinder that was raised by a cab jack or an electric pump which was optional. The green one in the photo is mine. It is a 1956 D-42 that was purchased new for Sinclair in Tulsa, OK.
  24. 7 points
  25. 7 points
    Still have some finishing up to do but it’s getting closer to going back to work
  26. 7 points
    Making a CAT dozer delivery.
  27. 7 points
    Looks familiar https://www.duncanputman.com/truck-of-the-month/2019/april/
  28. 7 points
  29. 7 points
  30. 7 points
    My photos posted here 2/28/2011:
  31. 7 points
  32. 7 points
    It’s coming back together! Latest update says starting it Thursday morning and having it roaring down the streets of Maryland later that day. What funny is one of the big delays was the fact that her replacement, Independent’s new Engine 12, was also in the shop and obviously the wagon still in service took priority. I’ll send pictures when I can, but I will say that her chrome shines brightly, or atleast what you can see if it behind the rust.
  33. 7 points
    Must have been a rookie an experienced Swift driver would have been cross ways on both sets of tracks
  34. 7 points
    I saw this former Overnite Transportation F model sitting at Litchford's Garage in Concord the other day. I stopped yesterday and got a few pictures. You used to see these all the time, Overnite, Smith's Transfer, and many other companies had similar F model Macks, and then all of a sudden you say "hey- don't see those any more!"
  35. 7 points
    Now these are cranes...............
  36. 7 points
    https://www.ebay.com/itm/LimitedEditioN-Vintage-MACK-TRUCKS-Logo-T-shirt-2side-Custom-Text-By-Paccart/264216228840?hash=item3d8483b3e8:m:mHQZ6nknzkP2eazsEfGYtQw
  37. 7 points
    Added a few more parts and pieces Truck Shop
  38. 6 points
    I dont care what people say, people were made of different stuff back then than they are today Paul
  39. 6 points
    All done with about 200 h.p Loaded with Steel Plating
  40. 6 points
  41. 6 points
    Newest addition 1958 B-81 SX
  42. 6 points
    Here is the mate to J.Hancock's CH Tanker. CJ is the 10 wheel version.
  43. 6 points
    Hi all, just thought I'd share a horn button repair I made to our Type 45 using some 3D printed parts. As you can see in the photo, one of the rubber blocks that retains the horn button had broken. I'm not really sure if these parts are available, but making one essentially for free is always better than buying if you're like me - more budget constrained than bound to strict originality. I drilled out the rivets holding the original rubbers, and had a friend of mine print up some replacements which are designed to accept a small flat head screw in place of the rivet. Blue would not have been my first choice but its what he had in a semi-flexible materials on hand and it doesn't show when the button is installed.
  44. 6 points
    Awwww that's nice, that squirrel was falling and her buddy caught her and is holding her up until she regains her footing.
  45. 6 points
    Mack Maxidyne equals Money Maker. Tip Turbine with associated plumbing for the hood scoop.
  46. 6 points
    12'6" and it has 30" sides IIRC. It is a GarWood bed and hoist. I don't have any sideboards but there are pockets for them. Truck idles at 400rpm and will dump the loaded bed at idle. California truck originally and I purchased it from the original owner's estate having it trucked home in 1998. Everything is original on the cab and chassis except the rear suspension which is Hendrickson. It's not much but it does work for me when needed.
  47. 6 points
    It's official, March 1st, I turned the page and started re-assembly by putting the cowl back on and today welded in the new sills and lower back frame. It was very helpful to remove the cowl and rid the pillars of rust. It also allowed me to put the cowl up on a temporary bench to work on it and repair the right cab mount, which had completely blown through and left a fist sized hole. Lots of other small, time consuming repairs were made all over the cowl/pillar area. Overall, I'm very happy with the results and alignment looks good. Not that far off from removing the cage and test fitting the doors. Once that's done, it'll be back to the sheet metal and re-installing it.
  48. 6 points
  49. 6 points
    Still had that new paint smell at Macungie 2015.
  50. 6 points
    Because of your post I took one of the warranty calls today, the gentleman hung up on me after I corrected my address. I asked him to verify my current address, he rattled off my NYS address, I said it wrong , here is my current address: NYS Home For The Criminally Insane, Building C, Cell #245 Central Islip N.Y. . I can't imagine why the nice man hung up, I even called back and asked him why he hung up. . .he hung up again..
×
×
  • Create New...