Jump to content


Popular Content

Showing content with the highest reputation since 08/31/2009 in Posts

  1. 22 points
    You're a 19 year old kid. You are critically wounded and dying in the jungle somewhere in the Central Highlands of Viet Nam . It's November 14, 1965. LZ (landing zone) X-ray. Your unit is outnumbered 8-1 and the enemy fire is so intense from 100 yards away, that your CO (commanding officer) has ordered the MedEvac helicopters to stop coming in. You're lying there, listening to the enemy machine guns and you know you're not getting out. Your family is half way around the world, 12,000 miles away, and you'll never see them again. As the world starts to fade in and out, you know this is the day. Then - over the machine gun noise - you faintly hear that sound of a helicopter. You look up to see a Huey coming in. But.. It doesn't seem real because no MedEvac markings are on it. Captain Ed Freeman is coming in for you. He's not MedEvac so it's not his job, but he heard the radio call and decided he's flying his lightly armored UH-1 Huey down into the machine gun fire anyway. Even after the MedEvacs were ordered not to come. He's coming anyway. And he drops it in and sits there in the machine gun fire, as they load 3 of you at a time on board. Then he flies you up and out through the gunfire to the doctors and nurses and safety. And, he kept coming back!! 13 more times!! Until all the wounded were out. No one knew until the mission was over that the Captain had been hit 4 times in the legs and left arm. He took 30 seriously wounded soldiers out that day. Some would not have made it without the Captain and his Huey. Medal of Honor Recipient, Captain Ed Freeman, United States Army Retired, died Wednesday, August 20, 2008 at the age of 70, in Boise, Idaho. May God Bless and Rest His Soul. I bet you didn't hear about this hero's passing, We’ve heard plenty about murders, Health Care, Border security etc. BUT NOTHING ABOUT THE PASSING OF Medal of Honor Winner Captain Ed Freeman. Shame on the media!!!
  2. 19 points
    Got the engine and transmission assembled, painted and detailed. Now they are together and finally in their home. Still have a LONG WAY to go before it's first maiden voyage.
  3. 19 points
    Here’s the story. I have recently acquired this Mack B615S 1222. It was purchased from my Dad's company. They ordered it new from Mack. So technically I am the second owner. The company did heavy hauling, crane work, millwrighting, ect. This truck was used to pull a 200-ton capacity trailer. (that is not a typo 200 tons! ) The truck has some neat features I do not see often. First is the extra set of dual wheels that bolt on to the back of the truck. They are not driven but do have brakes. I do not use them b/c of the trailer I am using. The best part of the truck is the winch mounted on the back of the truck. It is perfect to get the steamer on the trailer when it is cold. I contacted Mack Historical and on the build sheet it is noted to have a winch put on it. (something about how the exhaust was run). The engine is the original V8 END-864 with the 7220 Quadruplex trans. The amazing part 32K miles. The truck was keep indoors, well serviced and in excellent survivor condition. As for my intentions…. Before my Dad retired and sold the business, I got my CDL. I am not a truck driver but obviously am very comfortable using heavy equipment. I did a few hours of training and passed the test on a modern 10 speed. I tagged the truck Antique, permanent Pa. trailer tags and will haul my 1918 Case 10 Ton Roller around to a few shows a year. I am learning how to service the truck. I first started with an oil change. Had all the part #s from Mack. Had a Mack service station up the road, not any filters available, fuel, oil, or coolant. I guess that is why the Historical Museum puts all those contacts in the back of the book. So I got one at Napa. My first question #1 I used 7 gallons Rotella T4 15w-40 is that OK? The book calls 20w-40 or 10w-30 at 30 deg and above. I am also curious about the exhaust brake. I see it is a valve on the pipe and It is air actuated. #2 Do I turn it on at the top of the hill then turn it off at the bottom? It does not automatically disengage when I press the accelerator. It also does not seem to do much. At 25 tons combined I really don’t need it. I do not want to stress the exhaust valves/springs. #3 don’t use it at all? As for the engine. As I am finding out not one of Mack’s best. Before I got the truck I heard that they use to break the cranks, then they would drop a gas engine in the trucks. Now that I have spent hours researching the truck I am even more nervous. That being said, this is what I got. The biggest tip I see is not to lug them. #4 is that lug them below operating 1700RPM ? The range is 1700-2300 as per the tag in the cab. I have been trying to keep it between 1900-2300. #5 Any other tips? The Quadruplex!!!! Holyshit…. To my credit I did not have anyone to show me how to use it. I learned from Twin Stick Pappy on Youtube. I am not as good as Pappy but my skills are improving. Certainly, makes you learn patients when shifting. The downshift from 4th lo to 3rd high or 3rd lo to 2nd high is kicking my butt. I have found that downshifting a bit early, without overrevving, helps. I am sure the comments will be “more practice” and “match the road speed”. But I will throw it out anyway #5 any other tips? Quick story about the trailer. I picked it up and the lights did not work. Went thru and cleaned the grounds and plugs (3 on that trailer) No lights. Pulled the light, power to light. Tested light, it worked. Retested trailer with volt meter -12V…. shit pos. ground truck ….. polarity sensitive led lights on the trailer NO BUENO…. So for $60 I put incandescing lights back on the trailer. My last question, for now, is about the Dry-Slippery air switch on the dash. #6 Does it limit the front brakes or does it engage the second drive unit. I’m confused. So that has been my journey so far with the truck. Sorry for it being so long but I am new to this and have a lot to learn. Every time I get out of the truck I pull my earplugs and say “that’s a man’s truck!” Hot, loud, smells like oil, I love it. I am a young man and will own this truck for a long time, but I believe we are caretakers of this equipment for the next generation to enjoy. Thank you in advance for your help.
  4. 19 points
    The Wellington Mack will be returning to New England. I don't want to get into politics about what did or did not transpire between the local chapter and the national chapter since it occurred years prior to me finding the common passion we all share amongst us, which is trucks. However I would like to say that we all admire, collect and preserve the history of trucks for future generations. Everyone of us one way or another, contributes to this preservation of trucks and history. With that said, the truck will reside back in the original place it had been for years, when it was first left for generations to admire. It will be at the Haul of Fame Musuem in Canterbury, Ct. The Truck will from time to time be loaned to other museums that desire to display it, as well as the Mack Musuem for all to enjoy. It will be brought to truck shows and events as well. This Truck is an iconic piece of American history, especially for all those who sacrificed their lives during WW II so that we could live freely in this great country. It truly deserves to be seen by all. I'm proud to say The Wellington, will stay in this country for all to enjoy, and in the New England area as the original owners had desired. I like to give a big thanks to the Fox family for wanting keep history alive, for future generations. I'd also like to thank the Yaworski family from Ct for originally housing the Wellington where it resided in New England for many years and taking it to shows. I would also like to thank Gary Mahan from NJ, for fixing the issues on the motor, housing the truck and taking it to shows, and a special thanks to the Mack Musuem for displaying this iconic piece of History for all to see. But most of all thanks to all of you, for keeping these trucks and history alive and well and preserving them for future generations to admire. Without all of you, most of the truck history would have been lost forever.
  5. 18 points
    Got the old girl to move under it's own power for the first time in two years. Decided to move it out to give the garage a much needed cleaning up. Going to install the grill shell and headlight panels later. Almost took it down the road but it's not quite ready for it's maiden voyage yet.
  6. 17 points
    Got the lettering done. I got a "sponsor".....advertising for them, art work for me. It's a win for both of us.
  7. 17 points
    Norwalk(know as Summit Racing Equipment Motorsport Park) had their Fun Ford "Reloaded" this past weekend. Three day event. I won Nostalgia class on Sunday which put me in the run off against the Saturday winners. I won that round which put me into the final four run off for "King Ford". I lost in the semi finals with a .002 break out. It was only .01 difference in the reaction times so there was no wiggle room at all. Had a great time, the weather was spectacular all three days. https://www.summitmotorsportspark.com/news/81-news/1311-daily-race-results-for-fun-ford-reloaded-2 In Nostalgia Ford, where old school cool is never-ending, Larry Kortkamp and John Feistritzer each turned on a red light in their 1964 Ford wagon and 1957 Fairlane respectively, but Kortkamp, whose reaction time was -.012, took the win and put up a 10.96 on his 10.96 dial while Feistritzer put up a 12.53 on his 12.42 dial.
  8. 17 points
    My New LJT with a lanova diesel on its way to Ct from California.
  9. 17 points
    And had a great time!
  10. 16 points
    I wanted to share my latest addition . It started life as an R795 . But the owner ( that has passed now ) liked detroit motors. So they put an 8V92 in it. I don't know a lot about the truck. I believe it has 44 k rears, 12 k front . I do know it is a 1977 , 475 hp and it has a 13 speed . I am now the 3rd owner of the truck. My plan is to use it a little to move equipment and take to the occasional show. As strange as it seems …….. my attraction to this truck is the motor. It just sounds so cool ! I plan on doing some video of it . I will post when i get something uploaded .
  11. 16 points
    Thought I’d share a couple pics of my R model that was delivered this weekend. I purchased the truck from the wife of the original owner who passed away last year. He had ordered it new in 1979 and was the only one to drive it. The truck has 118k miles and was used to pull a lowboy. It’s completly original except the blue paint which was done at the Mack dealer when truck was new.
  12. 16 points
    Got my truck back from paint today. It was my first time using this shop and I'm very pleased with the results. Some of you may remember but I saved this truck from the scrap yard. It's a long process but it's coming together nice. Tomorrow I have a smoke test then I'm going to pull the tanks and have them painted to match the cab. The paint is all metal flake with a lot of pearl. I'll have more pictures tomorrow but here are a few teasers.
  13. 16 points
    Thought you all might like to know that Greg took the Working Class Truck award at the Endless Mountains Antique Truck Show this weekend. The 1985 MH 613 looks great. Hard to believe that it's 32 years old.
  14. 16 points
    So a young white woman getting married next month is gunned down by black cop, body cam was off, cruiser cam was off, and no one knows what happened, the now dead woman is the one that called 911 to report a possible crime and ends up dead, if this was to happen to a BLM supporter then riots and mayhem would erupt but instead it happened to a white woman, no outrage, no marches or riots, instead people will wait for the justice system to do it's job, that is what civilized people do, now that does not mean that BLM supporters are animals and uncivilized but ???? any way we now wait for the MN. State Police to do their investigation of the Black Minneapolis police officers actions. and no word from Al Sharpton or any of the bunch that scream when the police screw up, I guess that what happens when it's a dead white person.
  15. 16 points
    Got the sign painter that originally lettered truck to do it again,32 years later.
  16. 16 points
    The new dog home and out in the sun. E9 with a 12 speed.
  17. 15 points
    Couple pics from my son's wedding Sat.
  18. 15 points
  19. 15 points
    1985 RW 653 . Yes that is documented actual original miles , 3406 cat eaton 13 speed this is next to go in my paint booth for refinishing.
  20. 15 points
    Happy July 4th to all our friends across America. Thank you to all the military personnel who give us a reason to celebrate.
  21. 15 points
    (Here's something to think about.) My brother in law had to choose a new primary care doctor. After two visits and exhaustive lab tests, she said he was doing fairly well for his age.(he's past seventy). A little concerned about that comment my brother in law couldn't resist asking her, 'Do you think I'll live to be 90?' She asked, 'Do you smoke tobacco, or drink beer, wine or hard liquor?' 'Oh no,' he replied. 'I'm not doing drugs, either!' Then she asked, 'Do you eat steaks and barbecued ribs and french fries?' ' he said, 'Not much... My former doctor said that all red meat is very unhealthy!' 'Do you spend a lot of time in the sun, like playing golf, boating, sailing, hiking, or bicycling?' 'No, I don't,' He said. She asked, 'Do you gamble, drive fast cars, or have a lot of sex?' 'No,' He said......... She looked at him and said, 'Then, why do you even give a darn?
  22. 15 points
    I was in town anyway so I stopped by the grocery store with my sonto pick up a few things.! The people looked at me funny lol
  23. 14 points
    Vermont man takes revenge on town board with a 700-pound statue of a middle finger By Rex Santus Dec 11, 2018 A Vermont man was so incensed by his town's zoning regulations that he erected a 700-pound statue giving officials the middle finger — and lit it with floodlights so they would always be reminded of his feelings toward them. Ted Pelkey’s decade-long feud with local officials reached spiteful new heights Nov. 30, when he installed the statue on a high pole in his front yard, along Route 128, after his request to relocate his monofilament cleaning and truck repair business from a nearby town to his own property was denied. Pelkey said officials won’t let him build the garage simply because they don’t like him, and he thought a middle finger was just the right response. “We wanted to show our appreciation,” Pelkey told VICE News. The Westford Selectboard and Development Review Board had denied Pelkey’s requests for the large garage, asserting that his applications did not meet the town’s standards for a variety of reasons. Among them, Pelkey’s application lacked necessary information about lighting that will “likely be needed for security purposes,” and did not effectively describe the purpose of the building, officials said. But while Pelkey couldn’t legally build a garage, he does have the legal right to flip off town officials for all eternity. Though billboards are banned in Vermont, Pelkey’s middle finger is protected because it isn’t advertising a business or service. Furthermore, the middle finger is a gesture that is generally protected by the First Amendment, so Pelkey’s $4,000 statue seems to fall under the category of “public art.” “He apparently can do what he’s done,” Allison Hope, chair of the Westford Selectboard, told the Burlington Free Press. As it turns out, even though billboards are banned advertisements in Vermont, the middle finger has gotten more attention for Pelkey’s business than any roadside sign ever would have. Twitter users have expressed a growing admiration for his pettiness, and there’s even a Facebook fan page for Pelkey’s wooden finger statue. Pelkey’s attorney appealed the board’s decision several weeks ago and is awaiting a decision, according to the Burlington Free Press. Images courtesy of Ted Pelkey
  24. 14 points
    This truck hasn't seen many miles in a lot of years. A friend who started driving in Virginia in an H model wants to drive it up to the Brooks, OR show in a few weeks so I decided to get it serviced and make a run. It performed well other than the sticks are awful stiff. It will be a hot 270 mile run but a lot of fun and memories. Note the smoke in our valley................plain awful for 2 weeks now.
  25. 14 points
    We had our local tractor show this past weekend. Friday was nice but Saturday was almost a complete wash out. I built a pulling hitch for the mack and they left me pull friday after the diesel pickups. Truck worked real good and had a lot of fun doing it. I have most of the bugs worked out of our johndeere B and got to put it on a pto dyno Saturday. It had 33 horsepower at 540rpm and maxed out at 38hp. Not bad for a 28 horse tractor.
  26. 14 points
    I flew to L.I. this afternoon to do the Barbecue for the Long Island Veterans Home and to put flags and pennies on the grave markers at Calverton National Cemetery. Wasn't going to do the feed for the Vets this year, but felt guilty about letting my fellow vets down. So tomorrow and Sunday my son and grandson will be cooking our butts off. Remember Memorial Day is for the Hero's who made the Supreme Gift to us. . .their lives for our freedom. Take a moment to remember them during the weekend. A coin left on a headstone lets the deceased soldier's family know that somebody stopped by to pay their respect. Leaving a penny means you visited. A nickel means that you and the deceased soldier trained at boot camp together. If you served with the soldier, you leave a dime. A quarter is very significant because it means that you were there when that soldier died." While this isn’t officially recognized or endorsed by the military, these tiny pieces of metal say a lot about those who bravely defended our freedom. The coins are gathered up by the cemetery and go into a fund for flags markers.
  27. 14 points
    found this on my birthday the gentleman wanted a new home for it so here it is ( thanks garad.) will post progress to this thread as I get it made
  28. 14 points
    Another log dog, 1947 was the first year for the iconic Mack LT. This particular example has a Hall Scott gasoline motor under the hood for power.
  29. 14 points
    Got all the bodywork and primer done.....block sanded and primed twice. Inside of the cab and doors painted original green. Outside of the cab and doors painted in the gulf blue.......on to the tank next! As the dog said when the train ran over it's tail, "Won't be long now!"
  30. 14 points
    Old Gus #9 has been completed and 26 miles on her already. People wave, give thumbs up when she goes rolling by... oh how my great grandpa and my grandfather would have been proud! We took it to church on Sunday and had over 30 visitors out to see old Gus.... and a photographer in his 70s who just had to have a few pics of the old girl. There's nothing better than bringing a community together to watch an old rusted truck come back to life... I couldn't be more proud of it. Grandma gets to see it in 32 days... What an accomplishment in my life I have to say, and I'm extremely thankful for NAPA of Garrison ND, and the Huettl family... bust most of all I'm thankful for the best man in my life besides my grandpas.. Robert.. without him this wouldn't be possible. We have to replace a pinion seal, and can now put the battery box cover back on.. and building the bed for it this weekend... My next project is the restoration of an old Case tractor for a Vietnam vet in town.. free.. he served our country.. wounded and just wants a nice tractor to show off... I will be posting the video of my grandmas reaction on July 8th! I'm scared to haul it five hours and hope all goes well! Ms Tracy D
  31. 14 points
    I just finished up my new storage barn this month. I finally have my 69, and 72 r models and all my equipment in one place and all under roof . I'm so excited it's been years in the making
  32. 14 points
    Was the last time the Mack ED milk truck was outside. It may get wet on this weekend's trip. It will just add to the patina. One of these days, I am actually going to start working on it.
  33. 13 points
    Mack makes a great truck and this is the site for people who like them, I literally grew up in Mack trucks so I keep going back to them, my first Mack was a B61 with factory sleeper, 673 and triplex, single axle with tag, last new Mack was a Granite with a 460 from the Mack dealer in Montgomery NY, Great truck no power, would have to split a gear just to make it over small rise on the interstate, it did not stay around long, this is a great site for help with problems, also great place to be reminded why you don't want to buy a new truck, I like the pictures and the stories, as much as I like the my Macks I hate the transmissions, great little motors, really well built truck just bad trans, but that comes from our experience and some others do fine with them, that's great for them. Odds and ends is great because on this site the intelligence level might be a little higher than some other places, but if you don't like what you read don't read it, reminds me of the pastor who went and watched a certain porn movie and then went around telling people how bad it was, when you find people who do not speak or debate subjects you tend find people who cannot figure out how their 14 year old daughter got pregnant, those that want to do away with threads that do not match their thoughts are the ones who cannot debate their ideas because they know they are wrong but continue to live in their own dark little closet trying to convince themselves they are right. If positive comments about Trump bother someone they should not read it, fact still remains that Trump has done a great job for this country and Obama was the worst which makes Carter feel great. If you’re a man that's grown a vagina than maybe you should get a vaginaloptomy and grown some man stuff, you might see things in different light. BMT is great, I hope those that are missing are fine, some people have problems and like to keep to themselves, some need support from others. MAPA- Make America Poor Again, Vote Democrat
  34. 13 points
  35. 13 points
    Sent from my iPhone using Tapatalk
  36. 13 points
    The weekend of Sept 7/8/9 I went to the wedding of a very close friend (in fact it was Ross Gabrick, the son of Robert Gabrick, many of you know to have written multiple books about transportation and trucks of various makes....) up in Duluth, Minnesota. I flew into Minneapolis and rented a car and drove up to Duluth. I was never in that part of the country before, let alone ever having seen any of the Great Lakes. My favorite part of the drive was northbound on I35 and going up that hill just south of Duluth, then when you crest the hill you look down into Duluth and the lake is all you see on the horizon. Beautiful. The wedding was something else, too. The headquarters for the wedding was at Larsmont, a resort right on the north shore of the lake in Two Harbors. Because Ross is a huge Bus nut, we took antique buses from the resort to the church on the other side of the famous lift bridge in Duluth. Then the buses from the church over to the reception at Deluth Union Depot, the old train station. It has been fixed up into it's heydey of train travel. Dinner was in the main lobby/waiting area. Then we had free roam of the train museum downstairs on the track level. The best part of all however was the private chartered train ride from Duluth to Two Harbors and back. Originally we were supposed to be pulled by tea kettle, however it suffered a fractured drive tire and had to be sidelined. So, F7 power it was. Yes, overgrown Detroit power. Oh well. One of the two buses, this one is the 1948 GMC, its entire life was Greyhound. The other bus was a 1960 GMC/Greyhound. I don't know why I didn't get a pic of it. I saw a freighter out on the Lake. This was taken from the harbor entrance, so I was told it was probably swinging on the hook until Monday morning when it would steam into Duluth or Superior, Mi. to unload. On Sunday I went to the Great Lakes Maritime Visitors Center, which is in the US Army Corps of Engineers building right there at the lift bridge. It is an excellent little museum (and free.) If you are into this kind of stuff, and are ever up that way, I highly recommend it. This is a model of how the wreck of the Edmund Fitzgerald looks. I saw a girl in a train car. I saw a 1938 Kahlenberg Diesel engine. I saw a two cylinder steam engine from a tugboat. I saw a world-famous lift bridge. They say it raises 5000+ times in a year. I believe it because in the three hours I spent in the area, it went up 4 or 5 times. I even took a video with a vessel and the bridge saluting one another with one long and two short air horn blasts. This is a tradition. I'd like to have the bridge air horn on my pickup truck. I saw a Pterodactyl. I saw another lake freighter, this was at the resort. At the time I pulled it up on shipfinder, but I don't remember the name, but it is one of the "Thousand Footers." I saw a pair of F-7's pulling the private wedding train I saw Duluth Missabe and Iron Range #229, a Baldwin "Yellowstone" 4-8-8-4, a smaller version of the UP Big Boy. This one is at the train station in Two Harbors. There is another one in the museum in Duluth where I got to go inside the cab. I saw the William A. Irvin, a retired Lake Freighter which is now a museum. I was pissed because I could not go aboard, they had the pier closed for renovations.
  37. 13 points
    I took the red headed woman that I love back to the airport in Roanoke today. I usually take rt. 43 from Altavista to Bedford, then 460 to Roanoke. When I was coming back today I happened to notice a big orange rock truck parked in a field over here at Leesville- you know, where that tri-axle Ford tractor with the lowboy is usually parked. I thought "hmmmm...that looks like a big Mack rock truck!" And of all the times to not have a camera- I always have my camera!..except today. Fortunately, you can take fairly decent pictures with a phone nowadays. So I stopped and pulled in the driveway and asked the guys that were standing around that Ford if I could take some pictures of the Mack. The man said "absolutely, start it up, drive it around the field!" And I thought he was joking, but one of his guys went over and cranked it up- started right up too. He told me that the state bought it in the 70's, used it on one job up on rt. 130, then he bought it and he's had it ever since, and still uses it doing site work from time to time. He said it only had 2,000 hrs. on it. I posted a little video of it running on Facebook.
  38. 13 points
    Nice looking black B, got the cab and hood for mine out of Texas as well, look like what is on the plate. There are more than a few B-755's still around. There was a number of differences from a B-75, mostly to do with raising the cab to fit the engine. Most do not have the original 864 in them anymore. OEM B-755 had the NA 864/255hp. It was Mack's first attempt at bigger HP but the engine was plagued with problems. Then came the twin turbo 864/305hp in 1967 in the R Model. The injection pump was a nightmare! I had a running 864/255 for my B-755 but choose to go with a 866/375hp when it was restored. Most of the bad problems were worked out in the 866 except for constantly cracking cylinder heads.
  39. 13 points
  40. 13 points
  41. 13 points
    So...... I have always loved to cook (my mom started teaching me when I was 9 or 10) and always did the cooking in the firehouse and to this day cook big and/or extravagant meals on holidays. You guys may recall last year, I was in the market for a smoker. I was asking some of the guys on here about them, and Otherdog talked me into buying a pit barrel smoker (www.pitbarrelcooker.com) So I asked the wife to get me one fathers day if she was going to get anything. (For fathers day she usually gets me something Macungie-related like a pop-up awning, or a small charcoal grill, or chairs, portable tables, stuff like that.....) So Macungie came, and so did Otherdog who surprised us all for the first time. He kept asking me "Well did she get it for you?" And I had to tell him "No, looks like we cannot afford one right now. I'll have to wait, maybe I will work some overtime and save up." So the Tuesday after Macungie, I get home from work and walk into the mudroom and damn near fall over a big ass box and damn near break my neck. Seems that the UPS man delivered a Pit Barrel Smoker. The wife was asleep (she was due into work that night) so when I get home from work on her work nights, I wake her up so she can shower, eat and get out the door for 7pm. So I run upstairs and wake her up and kissed her twenty times exclaiming "You got it for me!!! You got it for me!!!" Well imagine my confusion when she says over and over again "What the hell are you talking about? What smoker? I didn't get the smoker for you!" So I checked my Amazon Prime account thinking maybe I bought it by accident when I was looking at it (yes I have done that...........) but nope....Nothing on the account. So I called Amazon and spoke to an account rep.....She traces it back to a (insert real name here...........) "Otherdog with a Gladys, Virginia mailing address." So I called Otherdog. The conversation went something like this. Me: "Hey I just got home and damn near broke my neck on a box inside my mud porch." OD: "huh, what was that?" Me: "A Pit Barrel Smoker." OD: "Huh so she got it for you!" Me: "Uh, no." OD: "Well where did it come from?" Me: "The Gladys Fairy delivered it." OD: "Huh. That Gladys Fairy sure is nice!" So after going back and forth for a few minutes I let him in on that I called Amazon and found out. And then I said "Look, while this is a tremendous gift and I sincerely appreciate your kindness and friendship, I want to say that I cannot accept this, however, I also know you well enough to know that if I tell you I can't take it that you will tell me to shove it up my ass, so I thank you from the bottom of my heart and you are a beautiful man." Then he told me that I was one of the big driving forces that made him take off from work for a few days to drive to Macungie for the show, and he had such a good time he wanted to do something nice for me and my family. So, since I don't live far from Macungie....I threw together a little pick-a-nick thing for some folks and woke my ass up at 0530 on Saturday, and was out there and at precisely 6:30am I hung three beef round roasts and one bone-in pork shoulder into the very smoker that he gave me as gift almost exactly one year later. And around 2:15pm I got to watch Otherdog munching down. We had a great time and I don't get mushy on here often but it was cool to make some grub for him and watch him enjoying hisself. So thanks again Otherdog and happy fathers day to you and all the other fathers on here!!! The smoker all loaded up at 6:30am The smoked bone-in pork shoulder, being prepped for shredding. Then we mixed in an Eastern North Carolina vinegar-based barbeque sauce that my wife made. Picture of me starting to slice the three roast beefs. Photo by Otherdog's ladyfriend, Zina.
  42. 13 points
  43. 13 points
    By some reason I had ocassion to fly over a part of North Norway. The weather was found fine so I made a bit of picture work from the window. Those tight clouds on the last two shots covered the area above Athlantic ocean.
  44. 13 points
    Went this past weekend and brought home our new toy. Nice to get the puppy out and stretch her legs after a long winter. Spent some time and money on her over the winter... new injector pump new air compressor went back to 24.5 rubber and all new a.c. unit and a.c. compressor.
  45. 13 points
    Needless to say, I'm not to be trusted alone with lobsters any more. Thought it was funny myself.
  46. 13 points
    For my 666th post some more from Des Moines
  47. 13 points
    I am going completely through this truck. Ken Talley and a top notch mechanic of his along with support from Ira Wright (Mr KTTA)) Hoping to have had it done for des Moines but didn't happen so maybe Brooks, Or later in August.
  48. 12 points
    Ovr the years eye have way too much time hunt n pek n @ the keyboard least it keeps me off the streets @ night Lesee if animation will work cya §wishy
  49. 12 points
    I purchased a D7 Caterpillar and had a neighbor haul it for me. Nice looking Superdog.
  50. 12 points
    This same person told me all I had was a parts truck when I was going to change trans and rears in my 85. But as was already mentioned its kind of nice getting compliments on a 30 year old truck that's still working.
  • Create New...