Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 10/22/2019 in all areas

  1. 5 points
    Proudly served Framingham, MA with a delivery date of 3-22-1961.
  2. 3 points
    In 1994, Dick Kwak drove his 1939 Mack FH 280 miles from Ballston Lake, NY to Buffalo, NY for the ATHS National Show. To facilitate the trip, the drive sprockets were changed to give the truck a little more top speed of about 45 mph. The original EO engine had previously been replace with an EY engine. He entered the New State Thruway at the Amsterdam interchange and headed west. Unseasonable cold temperature and rain made for an interesting trip considering the truck had no heater or wipers. After the show, a more leisurely route was chosen for the 280 mile trip home. Must have been one hell of an adventure!
  3. 3 points
    Yes the picture posting problem has never been fixed has it It makes it very frustrating, however thru a third party I can post picks across Or perhaps evena fresh box of parts that turned up today for Mrs Mack from the US Red dot aircon for under the dash I hope Will be a shame to cut it up to make RHD but needs must Im not home to see so Im only guessing thats what it as I got a call from UPS un Sydney asking me to tariffs and the GST ( tax) on Friday So bare with the picture posting problem as there can be a way around it Someone on here put me onto Postimage.com Seems to work fine Paul
  4. 3 points
    A 2002 CH613 with a 460HP E-tech CCRS engine. The best class model for reliability in a pre-tier 3. That's the one I'd be restoring and driving.
  5. 2 points
    The first picture is how the truck looked when I bought it from Superdog, and the last two are with the axle moved and a new paint job and some chrome.
  6. 2 points
    That would require one hell of an adapter kit!
  7. 2 points
    First available scapegoat? Our dealership was tanking after 2008 and the owner blamed it on personal hygiene of a couple mechanics and a supervisors mullet. Meanwhile the roof was leaking so bad it filled a customers uncapped engine with water overnight.
  8. 2 points
    I believe thats what causes little capacitors to come into the world . . .
  9. 2 points
    Little did I know at the time this thread started in 2013 that I would end up owning the VL pictured in the first V8 reply! Here is that pic and here is the truck today.
  10. 2 points
    Following!!!! Here's mine 💪
  11. 2 points
    These cab overs have been at Winchester at our show. The one with D. P. Miller on the door now belongs to the Keystone Museum.
  12. 1 point
    I've got an '84 Mack MH613. A couple days ago the brake valve under the foot pedal broke off where the three bolts hold the assembly to the floor of the cab. I've checked around a few places and so far i've been told that nobody can get the part and it's discontinued. I've attached a diagram below. The piece that's broke is on the top left, with the three bolt holes. It's the casting piece that contains the plunger. That piece bolts between the actual air valve and the cab floor. Does anybody know of a place where I could order this? Or possibly a junk yard/used truck that has one? Or, if it's impossible to find, is there a way to swap out the entire brake pedal assembly to something more common? Thanks!
  13. 1 point
    There are a couple of MH Statue Of Liberty Edition truck around here and one came in to the shop today. The last time I saw them they were in great shape (8 years ago) now they are a little rough but the V-8 sounds great.
  14. 1 point
    I've had all too much experience with Freightliner "cross cab ventilation", in a blizzard you could see the snow blow right through the cab! Those cabs were so flimsy that a hit in just one corner would tweak the whole cab out of shape, and I've seen a mirror get hooked on something solid and the door would be bent all outa shape while the steel mirror bracket was fine. Those old Freightliners fell apart fast enough on the highway, I don't think they'd survive off road for long!
  15. 1 point
    lmao if it beats the rattling of my 20 year old CLs and the all the plastic that keeps breaking that i have to keep sourcing parts for which isnt no easy task on its own, i have be came very good friends with the parts people at watts LOL but if the FLD can beat all those problems then ill have to give it credit lol the inside of this truck has been redone and taken care of tho
  16. 1 point
    The all-new Autocar DC-64. #FrontEndFriday #Badass #AutocarDC #AlwaysUp .
  17. 1 point
    https://www.raneystruckparts.com/mack-headlights/ https://www.4statetrucks.com/lighting/mack-cv713-granite-headlights_15226.asp Remember what ever type you install LED, Halogen or HID you definitely need to readjust your headlights. The brighter lights have a different lens pattern and you will blind oncoming vehicles and not get the optimum light spread.
  18. 1 point
    What would you have expected with a Mack out front.We had a fellow back east here that had some Pete’s that had more then there share of chrome had a move like yours.His load came in by rail and it was a press for a machine shop,thing was huge.He asked me if I thought my 82 dm800 would pull the load,said he was afraid of breaking his Pete’s.I told him when and where he wanted the Mack.Pulled it no problem weighed in around 250000.Chrome won’t get you home.
  19. 1 point
    Look close to me. https://www.classicparts.com/1947-51-Outside-Door-Handles-pair/productinfo/18-105/# But difficult to judge since I don't have one handy. And having no one "handy" in my case means none of B-model doors for at least 1000 km in any direction
  20. 1 point
    My father was one of the men killed in the November 6, 1969 crash of the Mack Learjet. This year will mark the 50th anniversary of that tragic event. Anyone out there remember any of them? I would love to hear any stories you may have.
  21. 1 point
    My father drove a crackerbox when I was a kid and hated it. I’ve always wanted one though. I wish this one was closer.
  22. 1 point
    Sorry for the confusion we all ways called 5 x4 a quad and 5x3 a Tri no matter what it was in most the ones I drove were 5x4. Didn’t get drive one with Eaton very often. I always drove heavy one usually in a dump or mixer or low bed tractor
  23. 1 point
    He put a phone number to call Give it a shot
  24. 1 point
    Not much help but the only time I had a won’t communicate with Ecu I checked harness and grounds pulled a load through the harness with a head light both pos and ground had nothing coming out of ecu It was a bad ecu. That’s all I have for you
  25. 1 point
    Are you losing as much engine oil as you are taking out of power steering pump. Is the pump bolted to the accessory drive
  26. 1 point
    I’ve seen radiator hoses collapse inside that will drive you crazy also. With no external signs at all. Have you check the hoses inside top and bottom
  27. 1 point
    Where our farm is in Riverhead Long Island the local code enforcement now uses drones to find violations. I have none. . . yet, but a few years ago my neighbor rototilled a design for the drones, apparently it will never go away til they plow and replant a large section.
  28. 1 point
    I’m not a big fan of orange trucks but that one just fits. I like it👍
  29. 1 point
    Kscarbal you gave a great reply to that person. I feel that most everyone on BMT supports you for what you do share Mack history with us and you must use a lot of your free time to do it.
  30. 1 point
    Memo to Ralph: Sorry foamer, but old pictures of old locomotives are worthless- Those locos appeared in public all over the place for years and probably hundreds of images of them exist, and a lot of them very firmly in the public domain. So if you're hoping to make some small bucks threatening lawsuits, sorry buddy, get a life and maybe a job too. You'd be wise to accept the OP's kind off of a penny in royalties, 'cause that's the best you're gonna get!
  31. 1 point
    I've seen enough mechanical failures to know I wouldn't want to be anywhere near that thing, LOL.
  32. 1 point
  33. 1 point
    LR11000 under assembly at Syracuse University.
  34. 1 point
    I think given the longevity of production and developments/improvements, the ENDT, and E6 series get my vote. Pure and simple they were, and still are admirable performers.
  35. 1 point
    Must be kin to the mcyuppie who built a big house next to our potato farm in Riverhead L.I. (been there since 1918 when grand parents started it) and whinned about the "smell, the dust and the noises 7 days a week". So to be a good neighbor I stopped growing potato's . . .and planted cabbages. Masks the smell of top soil pretty well.
  36. 1 point
    So every person should carry a gun at all times in all places? I myself am not going to. If things are so bad that the need to carry a gun is mandatory, then I will live elsewhere. Life is too short. If I was king of USA Inc for a time, every "indisputable" murderer apprehended alive would die within 24 hours by the exact same means he/she used on their victims. In these cases with indisputable evidence (cameras, ect.), there would be no trial (a trial for what purpose?). That, I feel, would send shock waves to those who have murderous thinking. I couldn't change them.....but I would put the fear of god into them.
  37. 1 point
    Hi guys this is my🇭🇲 Aussie Bull~dog🇭🇲 1988 ~ MACK ~ Valueliner 🇭🇲🇭🇲 350 h.p. 9 speed mack box & Camelback rear. It was orginally a ex shell fuel hauler tanker before I got it and done it up over the years in Australia..Goes and pulls well like a freight train . And that's how a bulldog should be.. 10.4 matey👍🇭🇲🇭🇲🇭🇲
  38. 1 point
    It's not you, Lou, it's the Truck. It's very fixable. 370 is a perfect candidate. I'm a little suspicious of your friend blowing your doors off with his 2006 CV713 w/same set up? Does he go by the handle Old Red Mack, Nelm, Mackncheese, Big John, Dcrow, 03 Big Red, Mackvette, Mudman, Byrohoe or R.E.D.? If yes, then he's keeping secrets so he can laugh at you when he flies past you coming out of the pit.
  39. 1 point
    At least it's not up side down and on fire. . .
  40. 1 point
    Lampson Crane Manufacturing in Pasco, Wa. has a F-210D . They still use it in their yard hustling crane parts around. Truck Shop
  41. 1 point
    Mr. Mack Pro I have a 2000 ch 613 with a 460 from the factory last 6 digits 133167 will that ser# that you gave earlier work on mine. Mine does not have the waste gate
  42. 1 point
    I also saw an engine that seemed to miss also, it got way worse with rpm's. Turned out to be a missing fan blade
  43. 1 point
    the grey one is mine. It's not quite done yet but she's on the road. It's a blast to bomb around in!
  44. 1 point
    I know I posted this B on another thread way back some where, but here it is again. It was at the 2011 ATHS show in South Bend IN. I think the truck was out of KY.
  45. 1 point
    Here's a couple,also doubles as a Jersey Mack!.......................................Mark
  46. 1 point
    I posted pics earlier of this Brockway that recently sold. Here is the same truck working a job for me. I owned a crane service here in Mid TN for 40 yrs, just sold all my cranes 9-04-13. McCord is selling out now. Elliott Cranes has sold as well. Time marches on..!!
  47. 1 point
  48. 1 point
    I will talk to you like you don't know how so lets go. First to make sure your on # 1 cylinder pull rear Valve cover. Rotate the engine CW from the front until the exhaust valve on # 6 just closes and then the intake just starts to open. That is valve over lap and # 1 cyl is at top dead center.Back the engine up a few inches and you will see scribed degree marks in out side of the damper wheel at the engine timing pointer. You should back up past the marker a little and then put a fine mark on the 20 degree mark on the wheel.Now turn slow CW until the 20 aligns with the engine pointer stamped pump and not valve set.If you go past that always turn CCW enough to were your past then come back down to 20 going CW.Your thru turning the engine.Now take the plug out of the governor housing that is below the fuel shut off lever and there will be a tab or spad sticking out enough to see thru the hole in the housing. If the pump is in time it will be in the center of the hole. If not then pull the front cover off were you see 4 bolts in a slotted gear.Best to remove them if its out of time very much.You need a to turn the pump CW until you see the tab in the hole of the governor housing until you have it in the center and. You need a A B timing light to do it right but if your just wanting to get it running to get some were to get it done right then align the tab in the middle of the gobernor housing and install the 4 bolts in the front gear. You may have to remover the gear in front to get it were the bolts will go in. good luck.
  49. 1 point
    Just an update to complete the thread for future reference. The dealer flashed the ECM with the latest software update applicable. It retains is original 71 series turbo. We have had it back and been running it without any further issues other than a persistent burp on decel. The truck still throws an 8-3 EUP code and an occasional 1-8 code which I believe is a fan speed code. A few pictures are attached for fun.
  50. 1 point
    i got 1 and love it 91 mh all air ride v8 500 i wouldnt trade it for 10 peterbilts
×
×
  • Create New...