cowboyjaanhttps://www.bigmacktrucks.com/blogs/blog/406-cowboyjaan/ I just purchased a 1992 CH 613 with a E7 300 .... not running ..
 I did after a day of checking I found the fuel  pickup  inside the fuel tank was plugged .
 blew it clear and primed the pump and she started right up ...
 but, now after 10-15 seconds I have no throttle response ? and a Electronic malfunction light . after reading other blogs in this sight found out how to get the fault codes !

with two faults ,,, one 3-4 telling me " engine position sensor ... I adjusted the sensor on the Pump and this corrected that fault . the other fault is a 4-2 " fan clutch output " can anyone help me with this ?  Jaan

]]>en1992 CH613 Electronic malfuntion code 4-2https://www.bigmacktrucks.com/blogs/entry/755-1992-ch613-electronic-malfuntion-code-4-2/ I just purchased a 1992 CH 613 with a E7 300 .... not running ..
 I did after a day of checking I found the fuel  pickup  inside the fuel tank was plugged .
 blew it clear and primed the pump and she started right up ...
 but, now after 10-15 seconds I have no throttle response ? and a Electronic malfunction light . after reading other blogs in this sight found out how to get the fault codes !

with two faults ,,, one 3-4 telling me " engine position sensor ... I adjusted the sensor on the Pump and this corrected that fault . the other fault is a 4-2 " fan clutch output " can anyone help me with this ?  Jaan

]]>755Tue, 05 Apr 2016 01:46:04 +0000