Jump to content
Sign in to follow this  
  • entry
    1
  • comment
    1
  • views
    2,822

About this blog

Entries in this blog

 

2011 Mack LEU j1939 problem

I have a Mack LEU that the Mack Dealership couldn't fix, on a pretty new truck.
After the Variable Geometery Turbo (VGT) failed we had a new code pop up.
Data-link J1939 Can 2. Tech Tool said ACM offline due to J1939 Can 2 missing signal. The ACM was tested and works fine. the Turbo was installed correctly and calibrated. we tore apart the wiring harness for the ACM no faults were found. We checked all fuses. followed the twisted yellow and green Can 2 wires. We also broke open the sealed engine wiring harness by the turbo and it was normal as well. I need locations for the Terminating resistors. but also We found engine oil wicking to the ECU would this be the fault, or do i need to trace the entire J1939 circuit? any help is worth it thank you.

Replaced the Batteries as well

samtech1214

samtech1214

Sign in to follow this  

Welcome to BMT!

...The world's best antique, classic & modern Mack Truck support forum! Founded in 2000, BigMackTrucks.com is the place to go for everything related to Mack Trucks!

BMT!

BigMackTrucks.com is owned and operated by Watt's Truck Center, New Alexandria, PA. This forum and it's contents are not affiliated with Mack Trucks, Inc. or Volvo Trucks North America.

×