HarryS Posted June 12, 2016 Share Posted June 12, 2016 I have an Eaton pump that drives from the rear of the generator that has a serious leak at the shaft where it mates to the gen. The pump has these numbers on it 417099 800 and T9. I'm not sure if the pump has to come apart or if the seal can be removed and replaced from the outside. Of course this has to happen just before Macungie. 1 Quote Link to comment Share on other sites More sharing options...
HarryS Posted June 21, 2016 Author Share Posted June 21, 2016 I was lucky enough to find a seal to make the trip to Macungie. Eaton was no help after about 10 transfers and a half hour. The old seal had no number on it. Allegheny York (York, PA 717-266-6617) was able to match one up by dimension 3/4 x 1.25 x .312 (ID, OD, thickness). Also, in case anyone needs a pump Matt Pfahl had several in his flea market. Quote Link to comment Share on other sites More sharing options...
HarryS Posted June 21, 2016 Author Share Posted June 21, 2016 Oops! forgot the seal part #07123TC. Quote Link to comment Share on other sites More sharing options...
Triple R Posted January 16, 2017 Share Posted January 16, 2017 Am looking for the seal for the power steering pump shaft for 1960 B-61 Mack. Also, LUV Joy coupler for an Eaton power steering pump. Looking for a generator, Delco-Remy, Model #1106935, Serial #7130. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.