Chrome hood latch with square body to fit the Mack B-Model. Latches are custom chromed and require no modifications to fit. Sold individually, requires 4 per truck. Catch sold separately.

Black hood latch catch for the Mack B-Model. Sold individually, requires 4 per truck.

Chrome hood latch catch for the Mack B-Model truck. Sold individually, requires 4 per truck.

Polished stainless steel head lamp bezel for the Mack B-Model. 100% stainless. Sold individually, requires 2 per truck.

Small chrome bulldog suitable for mounting on top of your bumper guide pole. There is no mount included or available...must be fabricated as per your needs. Sold individually.

All metal, chrome air horn kit comes with mounting accessories including valve and fittings.

Chrome front axle hub cap features the vintage MACK script in the center. Suited for most B-Model front axles but may also fit some rear axle applications.

Chrome battery box set includes 1-chrome latch and 1-chrome catch.

Black battery box set includes 1-latch and 1-catch. painted black enamel.

Hood hinge cap set includes 2-upper caps and 2-lower brackets for mounting the hood hinge. 1 set per truck.

Chrome headlight bezel for B-81 style steel front ends. Also fits R and DM models with steel front ends.

Stainless steel bail wire hooks into the radiator fill neck and flips over to hold the radiator cap down.

Set includes 1-adjustable stainless steel bracket and 1-stainless spot mirror. Requires 2 sets per truck.

Chrome lug nut covers for 1-1/16" nuts. 1 pack = 10 nut covers.

Chrome lug nut covers fit 1-1/8" nuts. 1 pack = 10 nut covers.

Brass cup that fits to the emblem mounting studs to space the emblem properly. Usually requires 8 cups per truck. (sold individually)

Curved mounting base for the Bulldog hood ornament on B-61 style Mack B-Model. Made from solid red brass and beautifully chromed. Requires 1 per truck. (Bulldog not included)

Front grille emblem for the Mack B-61 style B-Models. Made from brass and chromed to perfection! Requires 1 per truck. This emblem has mounting posts on the back for mounting on the radiator shell.

Current production genuine Bulldog hood ornament. Bright chrome finish. Does not include mounting base.

Current production Bulldog with satin gold finish. Does not include a base.

Set includes 1-Thermodyne and 1-Diesel Emblem. Requires 2 sets per truck. Mounting pin locations will vary slightly, please allow for fitment before final painting in case you need to adjust the holes in your sheet metal.

Set includes 2-B61 chrome emblems for the sides of the Mack B-Model Hood. Sold as a pair, 1 set required per truck.

B-42 emblem set for the Mack B series. Sold as a pair. 1 set per truck.

B-60 emblem set for the Mack B series. Sold as a pair. 1 set per truck.

B-65 emblem set for the Mack B series. Sold as a pair. 1 set per truck.

B-67 emblem set for the Mack B series. Sold as a pair. 1 set per truck.

B-75 emblem set for the Mack B series. Sold as a pair. 1 set per truck.

B-83 emblem set for the Mack B series. Sold as a pair. 1 set per truck.

Vent window post seal seals the vent glass to the upright post when the glass is closed. Sold individually, requires 2 per truck.

Rubber fender welting seals the rear of the front fenders to the cab. Sold by the roll, 1 roll = 10 feet (1 roll will do both fenders)

Beaded vinyl molding seals the headlamp panel to the radiator shell and to the outer fender. 1 roll per truck.

Window channel for the roll up side windows. Has double stainless beads. 1 strip does one door, requires 2 per truck.

Window squeegee kit includes 2-inside squeegee's and 2-outside squeegee's. 1 set Will do doth cab doors.

Plain window channel for the roll up glass tracks on the inside of the door panel. Each channel gets cut in half to do both tracks. Also fit the upper window track on the R-Model style cab doors. Requires 2 channels per B-Model cab or 4 channels per R-Model Style cab.

Hood lacing comes in 1-25 foot roll and includes enough to do the front and rear cowlings where the hood rests. 1 roll per truck.

T-Clips for holding the hood lacing to the cowling. Sold individually, requires 30 per truck.

Cowl vent seal comes in a 6 foot roll and includes enough to do at least 2 vents. (1 roll per truck)

Side window glass for the Mack B-Model. Sold individually, requires 2 per truck (left & right are the same)

Windshield glass for the Mack B-Model. Windshields are sold individually, requires 2 per truck. (Left & right are the same)

Rubber molding that holds the B-Model windshields in the cab. Comes as one piece including the center strip.

Rubber molding lock strip fits in the front and back glass molding of the R and B Model style cabs. Also needed to hold the R-Model roof vent in. 1 roll has 30 feet and will do both the front and rear glass of a truck.

Rear cab glass for B-61 style cabs. Will not fit the B-67 cabs.

Molding for the rear cab glass. Uses the same lock strip as the from glass molding.

Seals the door to the cab. Solid foam rubber with self adhesive strip backing. 1 roll = 25 ft (1 roll will do both cab doors)

Vent window rubber set includes 1-left rubber and 1-right rubber. Made from original molds to exact Mack specs!

Cab door hardware kit includes all the screws, clips and bolts to assemble the inner door panel. Also includes handle trim rings and roll pins. 1 kit does 1 door. Requires 2 kits per truck.

Chrome inside door handle for the Mack B-Model. Sold individually, requires 2 per truck.

Chrome inside window crank for the Mack B-Model. Sold individually, requires 2 per truck.

Chrome vent window handle set for the Mack B-Model. each set includes 1-left handle and 1-right handle. 1 set per truck.

Stainless steel, spring loaded escutcheon trim ring for the interior window and door handles. Fits all B & R style cabs. Sold individually, requires 4 per truck.

Steel roll pins that hold the interior door and window handles in place. Sold individually, requires 4 per truck. Fits all B & R-Model cabs.

Fully restored left hand door panel starts out as a used panel, painted and rebuilt with all new parts. (latches may be professionally rebuilt depending on availability at the time)

Fully restored right hand door panel starts out as a used panel, painted and rebuilt with all new parts. (latches may be professionally rebuilt depending on availability at the time)

Door and ignition lock set includes 2-door tumblers and 1-ignition tumbler along with 2 matched keys. Fits Mack B-Series trucks.

Door lock retainer clip holds the door lock tumbler in the door. Sold individually, requires 2 per truck. Fits all B & R Model style cabs.

Side window regulator scissors for the driver's door. Fits B-Models and early R-Model style cabs.

Side window regulator scissors for the passenger door. Fits B-Models and early R-Model style cabs.

Gear plate for the driver's side door regulator. This is the piece the inside door handle hooks to. Fits B-Models and early R-Model style cabs.

Gear plate for the passenger's side door regulator. This is the piece the inside door handle hooks to. Fits B-Models and early R-Model style cabs.

Support channel for the Driver's side roll up window glass.

Support channel for the Passenger's side roll up window glass.

Black dash knobs for the various B-Model switches. No lettering.

Spice up your B-Model dash with these chrome replacement switch knobs. Nice alternative to plain black knobs.

Rubber gear shift boot will fit most shifter applications, but is not original to the B-Model. It is the only option currently available. 1 boot per shifter.

Metal retainer ring holds the gear shift boot to the floor board. 1 retainer used per boot.

Horn button with Mack logo to fit the B-Model steering wheels. The center emblem is not identical to the original B-Model emblem, but it is very close. Does not include any horn guts...

B-Model brake pedal kit includes pedal assembly, new single circuit treadle valve and treadle adapter plate. Will fit the original floor opening.

Insulator between dash panel and dash. Comes in a 5' length.

Front floor mat for the Mack B-61 style cab. Comes with Mack logo in the center but no cut outs for gear shifters. May fit other cab styles, also.

Rear floor mat for B61 style cabs. Fits under the seats.

Rubber replacement pad for the B61 style clutch pedal. Also fits R-Model Clutch Pedals.

Jacobs single stage engine brake switch ID dash plate.

Black ABS plastic dash mat/fire wall insulator. has fiberglass insulation on back to help adsorb heat and noise. Does not include mounting clips.

Plastic clips that hold the dash mat insulator to the fire wall. Sold individually, requires 20 per truck.

Original cardboard style headliner kit. Includes cab back trim and hardware. This part is oversize and may require extra shipping charges.

Original cardboard style headliner kit for Mack B67 style trucks. Kit includes cab back trim and hardware.

Full pedal kit features original style Mack script pedal and diamond base. Also includes pivot pin and clip. 1 kit per truck.

Custom made que ball shift knobs are laser engraved with the vintage Mack logo. The insert is available in 3 sizes (3/8", 7/16" or 1/2") be sure to select the proper size to fit your shift stick.

Custom made black eight ball knob features a laser engraved vintage Mack logo and brass insert in your choice of size. (3/8", 7/16" or 1/2") Be sure to select the size to fit your shifter stick.

Custom made black acrylic shift knob with 1/2" NC steel insert. Knob has a Bulldog emblem embedded under the surface!

Custom made white acrylic shift knob with 1/2" NC steel insert. Knob has a Bulldog emblem embedded under the surface!

Custom made Red sparkle acrylic shift knob with 1/2" NC steel insert. Knob has a Bulldog emblem wearing a fire hat embedded under the surface! Finish is translucent with metallic sparkle. Perfect for Fire Trucks!

Custom made green sparkle acrylic shift knob with 1/2" NC steel insert. Finish is translucent with metallic sparkle. Custom made with an enamel Mack Logo pin cast under the surface.

Black plastic horn button enter for the B-Model steering wheel. Does not include the metal Mack emblem or any guts...this is just a replacement button center.

Black ABS plastic Defroster Duct for the B-Model Cabs...

Z clip catch that keeps the glove box closed.

Small rubber bumpers for the glove box door. Sold individually, requires 4 per truck.

Blank VIN plate for your model and serial number. Comes unstamped. Mounts to driver's side door.

Metal plate showing a diagram of the 18 speed Quadraplex shift pattern.

18" black replacement steering wheel for B and R-Models. This wheel has the soft padded grip and includes the matching horn button.

Original B-Model glove box door. This is a used part that we restore. Comes painted interior green but does not include latch or hinges.

Replacement dash plate with engine operating range instructions.

Bostrom 905 air seat custom built with tan vinyl and hot stamped Mack logo on the seat back. Has L brackets on the bottom to mount on your existing cab seat bracket. Will also work for passenger side.

Heavy rubber floor mats come in a set of left and right and feature a full color Mack logo on both mats. These will fit the Mack B-Model as well as most other vehicles including you car or pick-up.

Carpeted floor mat set for Mack B-Models, R-Models, and CH Models. Will also fir most passenger cars and trucks.

Parking light mounts under the headlight. Available with yellow lens only. Sold individually, requires 2 per truck.

Headlamp bucket comes complete with a stainless retainer ring, steel bucket, headlamp bulb and wiring pigtail. Fits all Mack Trucks with round headlights including the B & R series.

Fender mount turn signal lamp mounts to the top of the fender. Each lamp has a red side and an amber side with a chrome metal center bezel. Fits B & R Style trucks.

Original style push/pull headlamp switch for the B-Model.

Series / Parallel switch converts power from 24 volt starting to 12 volt running.

Push button starter button for the Mack B-Model.

Keyed ignition switch will fit Mack B, R, DM, RW, etc... This switch has the momentary start position but can be used with the starter button for early applications.

Complete cab wiring harness for Mack B61 style trucks. Can be used for pos gnd or neg gnd applications. Custom made, allow 3-4 weeks for delivery and please include any wiring requests in the instructions field during the checkout process.

Headlight dimmer switch mounts on the floor board and fits the Mack B-Model series trucks.

Original style turn signal switch with chrome handle. Mounts to the steering column.

Cab roof marker light comes with mounting gasket and hardware. Features curved base to match the contour of the B Cab. Made from metal and chromed. Acrylic amber lens. Sold individually, requires 5 per truck.

Heater switch is the original push/pull style. Fits Mack B-Model trucks.

Original B-Model style pull switch for the cab marker lights.

Original B-Model style high beam indicator lamp. Mounts in dash panel and features a red lens.

Bumper light features an amber acrylic lens and a chrome housing. Made to mount on top of the B-Model bumper.

Bumper light features a red acrylic lens and chrome housing. Mounts to the top of the B-Model bumper for fire truck and emergency applications.

Original style, reproduction B-Model parking light with stainless steel bezel and frosted glass lens. Mounts under the B-Model headlight. Includes steel bucket, bulb, socket and wiring harness.

Spacer wedge that levels the top fender mounted turn signals to the proper angle. Unfinished cast metal. Sold individually, requires 2 per truck.

Wiring boot kit that fits under the fender mounted turn signal and protects the wiring from road debris. Requires 2 kits per truck.

Cigarette lighter with chrome knob. Includes dash well and pigtail.

Speedometer head with stainless step bezel. Does not have the Mack logo on the face.

Oil pressure gauge with stainless step bezel.

Water temperature gauge with stainless step bezel. Includes 72" probe.

Single needle air gauge with stainless step bezel.

Amp meter gauge with stainless step bezel. Usually used on positive ground trucks with a generator.

Original style Mack tach head with Bulldog Logo and stainless bezel. Fits B-Model applications and some early R / DM style cab applications (with metal dash)

Fully restored dash panel starts out as a used panel, painted and loaded with all brand new accessories! A true work of art.

Fuel Gauge sender for square tanks. Will work on pos(+) or neg(-) ground systems.

Complete Engine brake kit for your Mack 2 Valve Engine. Will fit END(T)673 Engines.

Engine brake kit will fit your Mack 4 Valve engines such as the 237, 300 and 350. Made by Tech brake but compatible with all Jacobs parts.

King pin sets for the B-Series are available for certain applications...please call with your Model and VIN number or front axle number for more information.

Radiator mount rubber set includes 2-upper mounts and 2 lower mounts. Fits most B-series applications. 1 set per truck.

High quality 15" remanufactured single disc push type clutch. Does not include throw out bearing or pilot bearing. Price includes $400 core charge. You will be credited the core charge after returning your core.

Throw out bearing fits our 15" single disc clutch.

Pilot bearing for our 15" single disc clutch.

Transmission gasket set for the Mack 72 Series Tranny. (TRQ7220, etc...) Includes various gaskets to reassemble the tranny.

Trunnion style front engine mounting insulator. Fits most B-Series trucks.

Set includes 2-upper insulators and 2-lower insulators. Not used on most B-Series trucks. See trunnion mount for alternative mounting.

Rear engine mounting rubber set includes 4-upper mounts and 4-lower mounts. i set per truck.

180 deg thermostat for the Mack END(T)673 and similar engine. Note: Not all vintage engines used a thermostat. Please verify your application before ordering.

Rear Engine Seal Kit contains a rear housing and a lip style seal with narrow wear ring. (If you don't need the wear ring, please call to place your order). This kit will convert your Mack engine from the old lead rear engine seal to the newer rubber lip style seal. Mounts with standard silastic.

Original style lead replacement seal for Mack END(T)673 and older engines. Fits in the rear engine main seal housing.

Shutterstat for trucks with air operated engine shutters. This is the sender that signals the actuator to open and close the shutters.

Shutter actuator controls the air operated shutters on the R & DM series trucks. May work with B Series but not confirmed.

Complete shutter set for the Mack B-Model Series. Made with blank mounting rails so you can match the holes perfectly by self drilling. Please allow several weeks for delivery.

Dry element replacement air cleaner for most B-Series trucks. May require some modification to fit, but it is a suitable replacement for the old oil bath style air cleaners.

Metal air cleaner cap fits most 4-1/2" applications including our dry element air cleaner. All metal construction, can be painted or chromed.

All metal air cleaner cap complete with a custom show chrome finish. Fits 4-1/2" applications including our dry element air cleaner.

Air cleaner clamp will fit our dry element air cleaner when an alternative mounting application is needed. Sold individually, usually requires 2 clamps per air cleaner.

Stainless steel muffler shield complete with 2 galvanized mounting clamps. Fits our Stainless 8.5" dia Muffler.

Vintage style bullhorn exhaust pipe in 4" diameter. Slides into the muffler outlet flange. Pipe is 3 foot long.

Standard aluminized muffler will fit B & R style trucks. 8.5" diameter and 33" long. 4" inlet and outlet.

Rubber bumpers for the removable fender panels. Sold individual, requires 10 per truck.

Large stainless steel screws for removable fender panels. Sold individually, requires 10 per truck.

Nut clips for the removable fender panels. Sold individually, requires 10 per truck.

Retainer washers hold the removable fender screws in place. Sold individually, requires 10 per truck.

Nice reproduction fiberglass fenders. Set includes 1-left and 1-right fender. This is a special order item and shipping is via LTL Truck only. Please call for more info and to place your order.

Cab mount rubber set includes 4 uppers and 4 lowers. 1 set required per truck.

Heavy rubber mud flap set features the vintage left and right Mack Logo. Note: Dogs should face each other when mounted on the truck.

Heavy rubber mud flap set feature the vintage left and right Mack logo. Note: Dogs should face each other when mounted on the truck.

Black front bumper for the Mack B-Model. Includes top plate but no tow hooks. Heavy item but can be shipped via UPS. Please call for LTL shipping information.

Beautiful chrome front bumper for the Mack B-Model series. Includes top plate but no tow hooks. heavy item, but can ship UPS. Call for LTL shipping information.

Mounts to the top of the B-Model bumper. Grille guard set includes 2-uprights, 2 stabilizer tubes and 1-top plate. Comes in un primered steel.

Fiberglass Lund Style exterior cab sun visor. Comes in gel coated fiberglass and will require minor trimming and finishing to fit. Hardware not included. OVERSIZE SHIPPING RATES APPLY FOR THIS ITEM Call for pricing

Square style bug shield mounts to the back of the Bulldog...no drilling required. Available in Smoke, Red, Green, Blue and Clear. Select color below when ordering.

Heavy duty Mack battery box bottom. Holds 2 - group 4 or group 31 batteries. Includes rubber latch.

black painted steel battery box top cover. Includes catch for the rubber box bottom latch.

Battery box cover made from aluminum with a plain machine finish. Can be hand polished to a bright, chrome like finish! Fits our battery box bottoms (not included)

Battery box cover made from aluminum with a polished mirror finish. Fits our battery box bottoms (not included)

Steel battery hold down bracket fits 2 group 4 or 31 batteries. Holds the battery securely when fitted inside our battery box bottoms.

Nickel cadmium carriage bolt that holds the battery hold down bracket to the battery box bottom. Bolt kit includes 1 bolt and 2 stop nuts. Requires 2 bolt kits per battery box.

Replacement wiper blades are 12" long and come complete with mounting hardware. Fits the Mack B-Model. Sold individually, requires 2 per truck.

Original style stainless steel wiper arm for the Mack B-Model. Sold individually, requires 2 per truck.

Acorn nut holds the wiper arm to the pivot shaft. Sold individually, requires 2 per truck.

Knurled drive adapter fits under the wiper arm to attach the arm to the pivot. Sold individually, requires 2 per truck.

New old stock wiper motor fits 1960 and earlier Mack B-Models that have the motor mounted under the dash. These have the banana shaped linkage adapter. Motor can be converted to work with 1961 and later style B-Models.

We offer an air wiper rebuild program for your 1961 and later motors. Turn around time is 3-4 weeks. Please call for more information.

New, original style 4 port wiper control valve with bleeder. Made by Haldex.

Stainless steel bubble back mirror head with 'MACK' spelled horizontally on the back. Mirrors are sold separately, requires 2 per truck. Will fit most Mack applications.

Chrome Super Liner emblem the mounts to the hood sides of the Super Liner Hood. Sold individually, requires 2 per truck.

Front MACK letter kit features black painted centers for contrast against the Super-Liner front hood bezel. Kit includes mounting clips.

One piece MACK letter kit made for the late model Mack RD Series hoods. Great item for custom projects, also!

Chrome half dog set includes 1-left and 1-right dog that mount to the door corners on most Mack R, RD, DM, U & RW models. Sold as a pair.

Gold half dog set includes 1-left and 1-right dog that mount to the door corners on most Mack R, RD, DM, U & RW models. Sold as a pair. Also makes a great item for creating custom Mack projects.

Small Metal letters spell out MACK for the front of some early R and DM models. Kit includes mounting clips.

Large MACK letter kit fits the Mack R & DM and several other series. Mounts across the front of the hood. Kit includes backing clips.

Plastic MACK Script emblem that mounts on the hood sides of most R, DM, U and Super Liner models. Sold individually, requires 2 per truck.

Chrome headlight bezel for B-81 style steel front ends. Also fits R and DM models with steel front ends.

Chrome exterior door handle for the R-Model style cab.

Driver's side stainless steel mirror arm set for the Mack R, RD and RW models. Set includes brackets and hardware for the left side. Does not include a mirror head.

Passenger's side stainless steel mirror arm set for the Mack R, RD and RW models. Set includes brackets and hardware for the right side. Does not include a mirror head.

Genuine Mack aluminum mirror head features the Bulldog facing left for driver's side mounting. Non-heated.

Genuine Mack heaed aluminum mirro head features the Mack Bulldog facing left for driver's side mounting. Includes wiring pigtail for the heating element.

Genuine Mack aluminum mirror head features the Bulldog facing right for passenger's side mounting. Non-heated.

Genuine Mack heaed aluminum mirro head features the Mack Bulldog facing right for passenger's side mounting. Includes wiring pigtail for the heating element.

Round base for the early Mack R, DM and Super-liner models with square hoods. Come in chrome and does not include a Bulldog.

Square shaped base fits Most Mack models with sloped hoods including the RD, CL, CH & CV. Chrome base does not include a Bulldog.

Small chrome clips that hold the radiator opening trim together. Sold individually, requires 3 per truck.

Stainless steel bezel that fits on the top front of the Super Liner hood. Dog and letter kit not included.

Current production genuine Bulldog hood ornament. Bright chrome finish. Does not include mounting base.

Current production Bulldog with satin gold finish. Does not include a base.

Plain window channel for the roll up glass tracks on the inside of the door panel. Each channel gets cut in half to do both tracks. Also fit the upper window track on the R-Model style cab doors. Requires 2 channels per B-Model cab or 4 channels per R-Model Style cab.

1 piece rubber windshield molding for the R-Model style cab.

Rubber molding that holds the rear cab glass into the cab. Sold as 1 roll (25 feet per roll) 1 roll per truck.

Foam door seal for R-Model style cab. Seals the door to the cab. Sold per roll. 1 roll does 1 door, requires 2 rolls per truck.

Window squeegee set fits R-Model style cab doors and includes 2-inside and 2 outside squeegee's. 1 set required per truck.

Genuine Mack Driver's side windshield glass to fit the R-Model style cabs.

Genuine Mack Passenger's side windshield glass to fit the R-Model style cabs.

Genuine Mack side glasss for the R-Model style cabs. Glass is the same for left and right, requires 2 per truck.

Complete Driver's side replacement vent window for the R-Model Style Cab. Will fit early and late model applications.

Complete passenger's side replacement vent window assembly for the R-Model style cabs. Will fit early and late model applications.

Channel that mounts to the back of the R-Model style cab vent window. Allows the side window to roll up and down. Sold individually, requires 2 per truck.

Rubber seal for the roof vent in the R-Model style cab.

Standard rear cab glass for the R-Model style cab.

Sliding rear window assembly for the R Model style cab. Features tinted glass.

Sliding rear window assembly for the Mack R Style cab.

Rubber molding lock strip fits in the front and back glass molding of the R and B Model style cabs. Also needed to hold the R-Model roof vent in. 1 roll has 30 feet and will do both the front and rear glass of a truck.

Door lock and ignition tumbler set includes 2 door lock tumblers and 1 ignition tumbler along with 2 matching keys. Fits the R-Model style cabs.

Stainless steel, spring loaded escutcheon trim ring for the interior window and door handles. Fits all B & R style cabs. Sold individually, requires 4 per truck.

Steel roll pins that hold the interior door and window handles in place. Sold individually, requires 4 per truck. Fits all B & R-Model cabs.

Chrome inside door handle for the R, DM & RW style cabs. Wil fit doors with or without vinyl trim panels. Sold individually, requires 2 per truck.

Chrome window crank will work with any R, DM & RW style cab. Fits doors wit or without vinyl trim. Sold individually, requires 2 per truk.

Door lock retainer clip holds the door lock tumbler in the door. Sold individually, requires 2 per truck. Fits all B & R Model style cabs.

Side window regulator scissors for the driver's door. Fits B-Models and early R-Model style cabs.

Side window regulator scissors for the passenger door. Fits B-Models and early R-Model style cabs.

Gear plate for the driver's side door regulator. This is the piece the inside door handle hooks to. Fits B-Models and early R-Model style cabs.

Gear plate for the passenger's side door regulator. This is the piece the inside door handle hooks to. Fits B-Models and early R-Model style cabs.

Rubber gear shift boot will fit most shifter applications, but is not original to the B-Model. It is the only option currently available. 1 boot per shifter.

Metal retainer ring holds the gear shift boot to the floor board. 1 retainer used per boot.

Self adhesive, brass colored ring that fits around the R-Model horn button. Can be engraved with your name at your local engraver.

Rubber replacement pad for the B61 style clutch pedal. Also fits R-Model Clutch Pedals.

Jacobs single stage engine brake switch ID dash plate.

Metal plate showing a diagram of the 18 speed Quadraplex shift pattern.

Full front rubber floor mat featurs foam insulation on the back to assist in climate control and reduce noise. Fits R, RD and RW style cabs.

Rear rubber floor mat is insulated on the back to aid in climate control and reduce noise. Fits R, RD, RW & DM style cabs.

18" black replacement steering wheel for B and R-Models. This wheel has the soft padded grip and includes the matching horn button.

Fuel pedal assembly includes pedal, base, pin and retainer clip. This set fits the R, DM, RW style cabs. (Non-electronic)

Brake pedal assembly includes pedal, base and pivot pin. Does not include treadle valve. Fits R, DM & RW style cabs.

Short, self taping screw used for interior upholstery. Includes rubber and beveled washers.

Long, self taping screw used for interior upholstery. Includes rubber and beveled washers.

Heavy rubber floor mats come in a set of left and right and feature a full color Mack logo on both mats. These will fit the Mack B-Model as well as most other vehicles including you car or pick-up.

Carpeted floor mat set for Mack B-Models, R-Models, and CH Models. Will also fir most passenger cars and trucks.

Headlamp bucket comes complete with a stainless retainer ring, steel bucket, headlamp bulb and wiring pigtail. Fits all Mack Trucks with round headlights including the B & R series.

Fender mount turn signal lamp mounts to the top of the fender. Each lamp has a red side and an amber side with a chrome metal center bezel. Fits B & R Style trucks.

Keyed ignition switch will fit Mack B, R, DM, RW, etc... This switch has the momentary start position but can be used with the starter button for early applications.

Set includes 4-long lights and 1-short center light. All lights are chromed plastic with acrylic bullet lens. Hardware and mounting gaskets are included. 1 Set per truck. (Lights are available separate upon request)

Rear combo tail light functions for stop, tail, turn and back up. Includes pigtail and mounting studs.

Headlight toggle switch for most R & DM style trucks. 3 pos. ON-OFF-ON with 1/4" push on terminals (6 post)

Floor mounted high beam dimmer switch for the R, DM and RW style cabs.

Rheostat mounts in dash and control dash light brightness.

Round turn signal light mounts to the top of the Super Liner fender. Amber and red lenses with rectangle amber reflector on the side. Can be used for left or right side. Housing is gray plastic only. Chrome not presently available.

Amber side marker light mounts in the fender of the R style trucks. Sold individually, requires 2 per truck.

Old style chrome lights fit the early R style cabs. Similar to the B-Model marker lights but these do not have the curved base. Made from chromed ABS plastic with acrylic lens. Sold individually, requires 5 per truck.

Speedometer head fits R, DM style cabs. Black bezel.

Tach head with black bezel. 0-3200 RPM. Fits R style cabs.

Tacometer head with black bezel. 0-2500 RPM. Fits R Style cabs.

Basic amber lights for the R and DM style cabs. Includes lens, base and gasket. Sold individually, requires 5 per truck.

Replacement amber lens for our #603 Marker light.

Original style Mack tach head with Bulldog Logo and stainless bezel. Fits B-Model applications and some early R / DM style cab applications (with metal dash)

Fuel Gauge sender for square tanks. Will work on pos(+) or neg(-) ground systems.

Chrome trim ring that fits around the dual round Superliner headlamp bucket. Fits LH or RH.

Dual round headlight bucket for the passenger side RH Superliner. Includes bucket, bulbs and retainer rings that hold bulbs in. Trim rings not included!

Dual round headlight bucket for the drivers side LH Superliner. Includes bucket, bulbs and retainer rings that hold bulbs in. Trim rings not included!

Chrome trim ring for the Superliner dual square headlight. Fits left or right side.

Dual square headlight bucket for the passenger side RH Superliner. Includes bucket, bulbs and retainer rings that hold bulbs in. Trim rings not included!

Dual square headlight bucket for the passenger side LH Superliner. Includes bucket, bulbs and retainer rings that hold bulbs in. Trim rings not included!

Standard Bendix dual circuit air treadle valve that mounts to the brake pedal base. Fits most R, DM & RW trucks with dual needle air valves. New.

Standard D2 Bendix air governor can be used on firewall or air compressor mounted applications. New.

Retangle air horn features Mack script on the snow cover and beautiful chome finish.

Single trumpet round air horn has a 6" bell. Comes with mounting hardware.

Complete Engine brake kit for your Mack 2 Valve Engine. Will fit END(T)673 Engines.

Engine brake kit will fit your Mack 4 Valve engines such as the 237, 300 and 350. Made by Tech brake but compatible with all Jacobs parts.

Engine throttle cable with locking T-Handle. Comes 108" long but can be trimmed to desired length. Fits most R, DM style trucks.

Engine stop cable comes 108" long but can be trimmed to desired length. Features red knob. Fits most R, DM style trucks.

180 deg thermostat for the Mack 237, 300, 350 (E6 & E7) Includes thermostat, seal and gasket.

Shutterstat for trucks with air operated engine shutters. This is the sender that signals the actuator to open and close the shutters.

Shutter actuator controls the air operated shutters on the R & DM series trucks. May work with B Series but not confirmed.

Stainless steel muffler shield complete with 2 galvanized mounting clamps. Fits our Stainless 8.5" dia Muffler.

Standard aluminized muffler will fit B & R style trucks. 8.5" diameter and 33" long. 4" inlet and outlet.

Set includes 2 rubber insulator panels for attaching the muffler to the cab. Fits most trucks with solid rear mounted cabs.

Compact, under frame muffler for the DM series trucks. Features 4" side inlet and top outlet.

Bracket for the DM series under frame muffler. Mounts to the frame and holds our #785 muffler.

Heavy rubber mud flap set features the vintage left and right Mack Logo. Note: Dogs should face each other when mounted on the truck.

Heavy rubber mud flap set feature the vintage left and right Mack logo. Note: Dogs should face each other when mounted on the truck.

Roof mounted cab vent for the R-Model style cabs.

Belmor/Lund fiberglass exterior sun visor for R, RD, DM & Super-liner style cabs. Includes mounting hardware.

Stainless steel exterior visor made by Dietier's. Fits R, RD, DM & Super-liner style cabs. Includes mounting hardware. Shipping cost adjusted for oversize box.

Stainless steel vent visors come as a pair (left & righ side) and mount above the roll up side glass on the R-Model style cabs...cab ventilation without exposing the interior to rain.

Square style bug shield mounts to the back of the Bulldog...no drilling required. Available in Smoke, Red, Green, Blue and Clear. Select color below when ordering.

Aerodynamic shaped bug shield for the late model R-Models with the sloped hood style. Will fit older Macks also. Attaches to the Bulldog, no drilling required. Available in Smoke only.

Chrome Bumper for the R-Model. Standard flat style with tow pin holes. (Shipping weight adjusted to reflect UPS oversize calculations)

Grille guard set includes 2-black uprights and 1-black top plate. Mounts to the face of the R-Model bumper. Hardware not included.

Stainless steel grille guard set includes 2-uprights and 1-top plate. Mounts to your bumper face. Hardware not included.

Chrome AM/FM antenna that mounts to the driver's side cowl on the R style cabs. Includes coax cable.

Blind well uts are rubber with threaded brass inserts. Used to mount the grille to the hood on the Super Liner models. Sold individually, requires 8 per truck.

Grille Densor fits most Super Liners with or without A/C. This is a functional condensor for your air conditioning, also.

Heavy duty Mack battery box bottom. Holds 2 - group 4 or group 31 batteries. Includes rubber latch.

black painted steel battery box top cover. Includes catch for the rubber box bottom latch.

Battery box cover made from aluminum with a plain machine finish. Can be hand polished to a bright, chrome like finish! Fits our battery box bottoms (not included)

Battery box cover made from aluminum with a polished mirror finish. Fits our battery box bottoms (not included)

Steel battery hold down bracket fits 2 group 4 or 31 batteries. Holds the battery securely when fitted inside our battery box bottoms.

Nickel cadmium carriage bolt that holds the battery hold down bracket to the battery box bottom. Bolt kit includes 1 bolt and 2 stop nuts. Requires 2 bolt kits per battery box.

Rubber battery box latch set includes 1-rubber latch, 1-catch plus mounting hardware.

Heavy rubber mud flap set includes 1-left and 1-right flap custom molded to fit the back of the R-Model hood.

Driver's side R-Model Door Shell for trucks with the new style latch. Large item will require LTL freight. Please call for more info and to order.

Passenger's side R-Model Door Shell for trucks with the new style latch. Large item will require LTL freight. Please call for more info and to order.

Roof panel that fits the old style R-Cabs. Large item will require LTL truk freight. Please call for more info or to order.

Roof panel for the late model R Cabs. This is the plus 4 inch design. Large item, will require LTL freight. Please call for more info and to order.

Cab back panel fits most R, RD and RW model trucks. Large item, will require LTL freight. Please call for more info and to order.

Driver's side rocker panel assembly for the R, RD & RW cab.

Passenger's side rocker panel assembly for the R, RD & RW cab.

Driver's side door sill for the R, RD & RW style cabs. This panel fits above the rocker panel.

Passenger's side door sill for the R, RD & RW style cabs. This panel fits above the rocker panel.

Plastic panel that mounts the headlamp bucket to the fiberglass hood. Fits older R Model Trucks. Sold individually, requires 2 per truck.

Driver's side cowl panel with vent cutout fits most R style cabs. Not for RW & DM styles...

Passenger's side cowl panel fits most R style cabs, but not the RW or DM styles...

Stainless steel guide pole set fits Mack R/RD Series and most B-Series. Set includes 2 poles and mounting hardware. Features LED lighted tops that work with parking/turn signal lights. Made by Bores Mfg.

Air wiper motor fits most Mack R & DM style cabs with air wipers. Includes a new control switch.

Transmission plate for the R Style cab air wiper system. This plate links the left and right linkage arms to the air motor. May be required to convert the old snail shaped air motor to the newer style air motor.

Driver's side wiper arm for R, DM & RW style trucks with air wipers. Uses 16" bolt on blade (not included)

Passenger's side wiper arm for R, DM & RW style trucks with air wipers. Uses 16" bolt on blade (not included)

Driver's side wiper linkage fits under the dash of the R, DM, RW style cab with air wipers and links the wiper arm to the motor.

Passenger's side wiper linkage fits under the dash of the R, DM, RW style cab with air wipers and links the wiper arm to the motor.

Bulkhead fitting for the wiper washer system. Connects washer tubing from under the dash to the external wiper arms. Sold individually, requires 2 per truck.

Air wiper dash control valve for R, DM style trucks with air wipers.

Air to Electric Wiper Conversion Kit includes everything you need to convert your R, DM or Superliner from air to electric wipers. This is a complete retro kit including motor, harness, linkage, arms, 18" blades and delay switch.

Plastic windshield washer fluid reservoir for R and DM style trucks. Fits inside the passenger's side door. Includes a new washer pump.

16 inch windshield wiper blade fits all R, DM and RW applications with air wipers. (Older electric conversions may use these 16 inch blades, also)

STEEL SHIELD Extreme Pressure Anti-Wear (EPA)™ is the ultimate protection for the moving metal parts for industry. Utilizing the most Advanced Boundary Film (ABF) Technology, it protects moving metal parts from heat, friction and wear in engines, transmissions, differentials, transfer cases, hydraulic pumps and motors, gear boxes, and other enclosed lubrication systems, due to boundary conditions of frictional abrasion, extreme pressure torque, dry startup and shutdown. Increased performance ... more info

STEEL SHIELD Extreme Pressure Anti-Wear (EPA)™ is the ultimate protection for the moving metal parts for industry. Utilizing the most Advanced Boundary Film (ABF) Technology, it protects moving metal parts from heat, friction and wear in engines, transmissions, differentials, transfer cases, hydraulic pumps and motors, gear boxes, and other enclosed lubrication systems, due to boundary conditions of frictional abrasion, extreme pressure torque, dry startup and shutdown. Increased performance ... more info

Steel Shield Additive packaged in a handy 5 gallon pail (buying bulk helps save you money!)

Engine Shield® is the ultimate protection for the moving metal parts in your engine. Utilizing Advanced Boundary Film (ABF) Technology, it protects moving metal parts from wear and damage due to boundary conditions of frictional abrasion, extreme pressure torquing, dry startup and engine shutdown. Other benefits include increased fuel savings due to reduced friction and increased oil flow, reduced maintenance and downtime, extended engine parts longevity and reduced operating temperatures.

Transmission Shield® is the ultimate protection for the moving metal parts in your transmission. Again, utilizing Advanced Boundary Film (ABF) Technology, it protects moving metal parts from wear and damage due to boundary conditions of frictional abrasion in the planetary gears, extreme pressure torquing of the drive train components, and insures proper valve body operation. Other benefits include further increased fuel savings due to reduced friction and increased fluid flow, reduced ... more info

TRUCK SHIELD™ is the ultimate protection for the moving metal parts for trucks. Utilizing the Advanced Boundary Film (ABF)Technology, it protects moving metal parts from wear and damage due to boundary conditions of frictional abrasion and extreme pressure. Other benefits are increased fuel savings, increased performance, reduced maintenance costs and downtime due to lowering operating temperatures that extends component life from light trucks to heavy trucks and equipment.

LITHI-SHIELD™ is the ultimate in extreme pressure anti-wear lithium complex grease. It exceeds all other lithium complex greases due to the addition of Advanced Boundary Film (ABF) Technology, extreme pressure and antifriction additives added to its formula. LITHI-SHIELD™ treats, seals and smooths metal surfaces to dramatically reduce friction, and as well as friction related heat and wear. LITHI-SHIELD's™ unique formulation allows it to exceed the performance of other greases while using ... more info

LITHI-SHIELD™ is the ultimate in extreme pressure anti-wear lithium complex grease. It exceeds all other lithium complex greases due to the addition of Advanced Boundary Film (ABF) Technology, extreme pressure and antifriction additives added to its formula. LITHI-SHIELD™ treats, seals and smooths metal surfaces to dramatically reduce friction, and as well as friction related heat and wear. LITHI-SHIELD's™ unique formulation allows it to exceed the performance of other greases while using ... more info

TOOL SHIELD™ is the ultimate protection for the moving metal parts for automotive and industrial tools. Utilizing the most ABF (Advanced Boundary Film) Technology, it protects moving metal parts from heat, friction and wear due to boundary conditions of frictional abrasion, extreme pressure torque, air line moisture and internal dirt. It works in all piston and rotary type air tools, stationary and hand-held power tools and many hand tools. Increased power and performance and greatly reduced ... more info

TOOL SHIELD™ is the ultimate protection for the moving metal parts for automotive and industrial tools. Utilizing the most ABF (Advanced Boundary Film) Technology, it protects moving metal parts from heat, friction and wear due to boundary conditions of frictional abrasion, extreme pressure torque, air line moisture and internal dirt. It works in all piston and rotary type air tools, stationary and hand-held power tools and many hand tools. Increased power and performance and greatly reduced ... more info

SPRAY SHIELD™ is the ultimate multi-purpose lubricant that also penetrates metal surfaces while maintaining highest qualities in corrosive and extreme humidity environments. SPRAY SHIELD™ penetrates into remote areas and delivers long-lasting lubrication in many different applications. SPRAY SHIELD™ works quickly to provide excellent protection and long-lasting lubrication.

SPRAY SHIELD™ is the ultimate multi-purpose lubricant that also penetrates metal surfaces while maintaining highest qualities in corrosive and extreme humidity environments. SPRAY SHIELD™ penetrates into remote areas and delivers long-lasting lubrication in many different applications. SPRAY SHIELD™ works quickly to provide excellent protection and long-lasting lubrication.

DRILL & TAP SHIELD™ is the ultimate protection for metal working tools. Utilizing the most Advanced Boundary Film (ABF) Technology, it protects cutting tools from heat, friction and wear. It works by the application of multiple metal working technologies that include ionic bonding agents, metal film strength reducers and lubricity enhancement agents. This, along with unique extreme-pressure additives and the addition of ABF (Advanced Boundary Film) Technology, produces proven results that ... more info

DRILL & TAP SHIELD™ is the ultimate protection for metal working tools. Utilizing the most Advanced Boundary Film (ABF) Technology, it protects cutting tools from heat, friction and wear. It works by the application of multiple metal working technologies that include ionic bonding agents, metal film strength reducers and lubricity enhancement agents. This, along with unique extreme-pressure additives and the addition of ABF (Advanced Boundary Film) Technology, produces proven results that ... more info

DRILL & TAP SHIELD™ is the ultimate protection for metal working tools. Utilizing the most Advanced Boundary Film (ABF) Technology, it protects cutting tools from heat, friction and wear. It works by the application of multiple metal working technologies that include ionic bonding agents, metal film strength reducers and lubricity enhancement agents. This, along with unique extreme-pressure additives and the addition of ABF (Advanced Boundary Film) Technology, produces proven results that ... more info

V-Twin Shield® is the ultimate protection for the moving metal parts in your Motorcycle engine. Again, utilizing Advanced Boundary Film (ABF) Technology, it protects moving metal parts from wear and damage due to boundary conditions of frictional abrasion and extreme pressure. Other benefits include further increased fuel savings due to reduced friction and increased engine and primary oil flow, reduced maintenance and downtime, extended parts longevity and significantly reduced operating ... more info

Trans-Shield® is the ultimate protection for the moving metal parts in your motorcycle transmission. Once again, utilizing ABF (Advanced Boundary Film) Technology, it protects moving metal parts from wear and damage due to boundary conditions of frictional abrasion in the gears, extreme pressure torquing of the drive train components, and insures proper shifting and operation. Other benefits include further increased fuel savings due to reduced friction, reduced maintenance and downtime, ... more info

MARINE SHIELD™ is the ultimate protection for the moving metal parts in your engine and transmission. Utilizing the most Advanced Boundary Film (ABF) Technology, it protects moving metal parts from wear and damage due to boundary conditions of frictional abrasion, extreme pressure torque, dry startup and engine shutdown. Other benefits include increased fuel savings due to reduced friction and increased oil flow, reduced maintenance and downtime, extended engine parts longevity and reduced ... more info

REEL SHIELD, the ultimate lubricant, cleaner, penetrant, and saltwater protectant, has been aggressively designed and formulated for the Sport Fishing Industry. REEL SHIELD lubricates and protects against extreme pressure and wear in all moving metal-tometal parts, in all types of fishing reel and drag systems. REEL SHIELD penetrates to the internal moving parts and shields against corrosion in extreme saltwater environments better than any other product to date. This distinguishes REEL SHIELD ... more info

15ml of Reel Shield fishing reel grease in a handy syringe applicator. Now you can put the right amount of grease where you need it.

We have assembled the ultimate Weapon Shield shooter's CLP kit! You get an oiler pen, a 4 ounce refill and a grease syringe! This is the perfect trio for all of your gun care needs and it is also offered at an unbelievable price!

Combo pack of our two most popular Weapon Shield products! 1-Oiler Pen plus 1-4oz refill bottle! Plenty of Weapon Shield to keep your guns running smooth and well protected even in the most harsh conditions!

Save money by purchasing in bulk. This 128oz container of Weapon Shield will keep you supplied with CLP while going easy on the wallet.

This economy size bottle will give you a good supply of Weapon Shield for all of your shooting needs!

Economy size bottle of Weapon Shield complete with a handy spray top.

The 4oz bottle of Weapon Shield is the perfect companion to the oiler pen! 

Convenient 4oz bottle complete with handy spray top applicator.

Weapon Shield Gun Grease is just what you need for keeping your shot gun or Semi-auto rifle running smooth! Now in a convenient 1 lb tub!

15ml of Weapon Shield's world famous gun grease in a handy syringe applicator. Great for getting the right amount of grease in just the right places!

Weapon Shield Gun Grease is just what you need for keeping your shot gun or Semi-auto rifle running smooth!

Weapon Shield 1/4 oz Refillable Oiler Pen. With it's long, thin needle applicator, this item is perfect for getting lube to those hard to reach places on your gun. It is also a good choice for any of your household oiling projects...fix that squeaky door or sticking window! You'll never use 3 in 1 oil again!

WEAPON SHIELD 16oz SOLVENT with spray top - The ultimate cleaning solvent that contains NO VOLATILES and is "ENVIRONMENTALLY FRIENDLY", non-toxic, non-mutagenic, and conforms to California's Proposition 65. There are no SARA Title III chemicals or heavy metals in its formulation as well. THIS IS AN INDUSTRY FIRST! A solvent that contains no harmful solvent properties, whatsoever.

WEAPON SHIELD 4oz SOLVENT with spray top - The ultimate cleaning solvent that contains NO VOLATILES and is "ENVIRONMENTALLY FRIENDLY", non-toxic, non-mutagenic, and conforms to California's Proposition 65. There are no SARA Title III chemicals or heavy metals in its formulation as well. THIS IS AN INDUSTRY FIRST! A solvent that contains no harmful solvent properties, whatsoever.

We have assembled the ultimate Weapon Shield shooter's CLP kit! You get an oiler pen, a 4 ounce refill, a grease syringe, a 2 ounce grease tub and a 4 ounce bottle of the new Weapon Shield Solvent! This is the perfect kit for all of your gun care needs and it is also offered at an unbelievable price!

Heavy quality heather gray t-shirt printed both sides with full color design. PLEASE CALL FOR STOCK SIZE AND AVAILABILITY.

Heavy weight heather gray sweatshirt printed on both sides in full color! PLEASE CALL FOR STOCK SIZE AND AVAILABILITY.

Awesome Watt's Truck Center Hotrod R-Model Mack with a background of flames! Printed on a military green high quality shirt. Every aspect of this hotrod design oozes attitude! PLEASE CALL FOR STOCK SIZE AND AVAILABILITY.

A red Mack Titan highlights this patriotic design...printed on high quality t-shirt. PLEASE CALL FOR STOCK SIZE AND AVAILABILITY.

Handsome patriotic design featuring the Mack Super-liner printed on navy blue heavy weight cotton shirt. Full color image on back. CALL FOR STOCK SIZE AVAILABILITY.

2011 T-Shirt design features a Mack Granite crawling over some rocks! Printed on a high quality sand colored shirt. Sizes S-M-L-XL-2XL-3XL PLEASE CALL FOR STOCK SIZE AND AVAILABILITY

Handsome patriotic design featuring the Mack Super-liner printed on heavy weight cotton white shirt. Full color image on back. PLEASE CALL FOR STOCK SIZE AVAILABILITY.

This 1:34th scale B Model replica features a patriotic paint scheme on the tanker complete with stars & stripes. Other features include and a detailed interior, safety walkway, drag chain, and spare tire and rack. This amazing replica measures over 14" in length.

Limited supply of B-Model Mack Dump Trucks in a red and green Christmas theme. Personalized with Watt's Truck Center on the bed. Made by First Gear in 1:34 scale.

This 11 oz. ceramic mug is adorned with a full color vintage Mack logo.

This key chain features an enameled vintage Mack logo on a pewter fob. Measures 1-1/2" wide by 1-1/2" tall.

Mack Retro Dealer Thermometer features a Mack B-Model image and is made from heavy gauge metal. Made by First Gear Co. Large 24" x 8" size. These thermometers are printed with our dealership info as pictured.

Small chrome bulldog suitable for mounting on top of your bumper guide pole. There is no mount included or available...must be fabricated as per your needs. Sold individually.

Set includes a full size chrome Bulldog and an authentic R-Model base. Perfect set to guard your desk or mount it on your pick-up or R/DM/RW!

Set includes a full size satin gold Bulldog and an authentic R-Model base. Perfect set to guard your desk!

Chrome half dog set includes 1-left and 1-right dog that mount to the door corners on most Mack R, RD, DM, U & RW models. Sold as a pair.

Gold half dog set includes 1-left and 1-right dog that mount to the door corners on most Mack R, RD, DM, U & RW models. Sold as a pair. Also makes a great item for creating custom Mack projects.

Current production genuine Bulldog hood ornament. Bright chrome finish. Does not include mounting base.

Current production Bulldog with satin gold finish. Does not include a base.

Single bolt mount for full size Bulldog ornaments. Includes 2 screws that thread into the dog's feet. Can be used for mounting a dog to your pick-up or for any custom bulldog mounting project.

Full size production Bulldog mounted to an ashtray bowl. The perfect accessory for your office or home!

Aluminum 'custom built for' dash plaque features the vintage Mack logo and can be engraved at your local engraving studio.

Black aluminum plate with 3M self adhesive backing. Can be engraved at any local engraving shop. Features the new Mack corporate logo.

Oval Mack script emblem fits the Mack Vision hoods, but makes a great accessory for and Mack custom application.

One piece MACK letter kit made for the late model Mack RD Series hoods. Great item for custom projects, also!

Oval emblem featuring the Bulldog portrait looking to the right. Made for the Mack CL Elite hood side but is a great item for your custom Mack project.

Oval emblem featuring the Bulldog portrait looking to the left. Made for the Mack CL Elite hood side but is a great item for your custom Mack project.

Large plastic oval emblem features the MACK script and was made for the Vision sleeper cab interior. Makes a great item for custom Mack projects.

Small self adhesive discs feature the MACK script and are made of aluminum. Great for any application where you need permanently stick a Mack logo!

Large chrome Diesel script emblems are sold separate. They may fit some Mack L-Model applications.

Chrome decal with the MACK Script. The decal is all weather foil and measures 2-1/4" x 4-1/2"...This is the decal that fits on the rectangular Mack air horn snow shield but it would look great on your vehicle window, office door or anywhere else that you want to show your Mack Pride!

Black Quarter Fender Flap Set features the vintage Mack logo. Rigid construction prevents sailing and sagging when installed on your quarter fenders. Measures 24" x 6". Set includes 1-left flap and 1-right flap.

Stainless steel business card holder is laser cut with the Mack script logo.

Plastic mud flap set measures 18" x 14". Perfect for pick-up trucks. Feature the full color vintage Mack logo. Set contains 1-left and 1-right flap.

Plastic mud flap set measures 18" x 14". Perfect for pick-up trucks. Feature the full color vintage Mack logo. Set contains 1-left and 1-right flap.

Heavy rubber floor mats come in a set of left and right and feature a full color Mack logo on both mats. These will fit the Mack B-Model as well as most other vehicles including you car or pick-up.

This calender is composed of beautiful, full color photos that were submitted by the members of BigMackTrucks.com! It is a huge, glossy wall calender with 13 months of Mack Trucks...antique, classic and modern. There are even a few old iron photos included within the pages!

Stainless steel license plate with the MACK script logo laser cutout. Polished to a mirror finish. Fits standard license plate holders.

Custom built clocks made from B-Model Hub Caps! This is a Watt's Truck Center Exclusive product made from actual hub cap seconds. Some caps came in with loose clips or slight blemishes. Instead of destroying or returning them, we created a great show piece clock for your shop or office wall! The clocks are made with quartz movement powered by 1 AA battery. Hands are brass. Limited production, get one while you can! Makes a great gift for any Mack collector!

Our hot rod b-model logo printed in full color on the face of this 20" neon wall clock. Features black, all metal bezel. made in Pittsburgh, PA.

20" Neon wall clock with maroon colored bezel and white neon. Features a vintage Mack Bulldog design. All metal construction, made in Pittsburgh, PA.

HUGE 20" Neon clock featuring the vintage Mack logo along with the "Mack Quality. Depend On It." logo on a "vintage tin sign" background! The clock comes in all aluminum construction with glass face and a bright flat black krinkle finish outer bezel. These are high quality clocks made right in Pittsburgh, PA USA! See our other listings for a green or red bezel!

20" Neon wall clock features all metal construction with chrome bezel and a vintage Mack Bulldog face design. Made in Pittsburgh, PA.

HUGE 20" Neon clock featuring the vintage Mack logo along with the "Mack Quality. Depend On It." logo on a "vintage tin sign" background! The clock comes in all aluminum construction with glass face and a bright Mack green outer bezel. These are high quality clocks made right in Pittsburgh, PA USA! See our other listings for a red or flat black bezel!

HUGE 20" Neon clock featuring the vintage Mack logo along with the "Mack Quality. Depend On It." logo on a "vintage tin sign" background! The clock comes in all aluminum construction with glass face and a bright Mack red outer bezel. These are high quality clocks made right in Pittsburgh, PA USA! See our other listings for a green or flat black bezel!

You may purchase a $25 gift certificate (or any multiple of $25 by adding quantity). You will receive an email containing a redemption code after you finish the purchase. You can then give the code to the gift recipient to redeem on our online store!

Compact economy level CB radio. Includes mounting bracket, mic and harness.

Cobra 25LTD Classic CB. Full feature, 40 channel CB includes bracket, mic and harness.

Cobra 40 channel CB radio with back lit face plate. Comes with mic, mounting bracket and wiring harness.

Magnetic mount CB antenna features a 3 foot stainless whip with spring base. 18 foot coax included.

CB Antenna kit includes 3 foot black mast, aluminum mirror mount bracket and 18 foot coax.

K40 black fiberglass CB antenna. 3.5' with standard 3/8" threads. Base and coax not included.

Cobra replacement mic for most 4 pin Cobra CB Radios.

Cobra external CB speaker. Includes mounting bracket and mini plug.

Sony Xplod CDX GT630 UI In Dash AM/FM/CD/MP3/Ipod. Has a front panel usb port for easy hook up to an MP3 Player or flash drive. Includes remote.

Standard blue glad hand fitting for hooking tractor air to the trailer.

Standard red gladhand fitting for connecting tractor brake hose to a trailer.

Set includes 1-red and 1-blue hose. 15' working length.

Set includes 1-red and 1-blue coiled air hose. 15 ' working length with 40" leads on either end.

7 way trailer plug with spring. Connects to the trailer receptical.

15 foot coiled black trailer cord come complete with 2-7 way plugs attached to both ends.

7 way trailer Receptical for attaching the tractor electrical cord.

15 foot Green coiled trailer cord is rated for use with ABS systems. Comes complete with trailer plugs on both ends. 1 end has a 40" lead before the coil starts.

Rubber boot fits on the back of the trailer receptical to keep dirt and corrosion out.

Heavy duty 20' x 1" mini ratchet strap with S-Hook ends is perfect for all your light duty tie down projects.

2" x 27' with flat style hooks on both ends. Ratchet strap has a working load limit of 3,333lbs (10,000lb breaking strength)

4 pack of light duty ratchet straps. Perfect for light tie down projects.

50' hose hooks to your gladhand for filling tires. Includes gladhand hookup and tire chuck.

50' tire hose comes complete with tire chuck and gladhand connection. Also includes a blow gun for cleaning out the cab.

FPPF truck wash cuts through tough road grime. Comes in 1 gallon jug.

16 oz spray bottle of cleaner used to prep aluminum surfaces before applying Alumetron Clearcoat finish. Removes dirt, grease and grime from all finishes (can be diluted to spray on paint)

16 OZ Bottle of Alumabrite for cleaning trucks and boats! Easy to Use: Spray On and Rinse Off! Cleaner / Brightener for Aluminum & Stainless Steel. Use with Pressure Washer, Garden Sprayer or Brush. Removes Oxide, Soot, Soil & Water Stains. Concentrated for Economy. Satisfaction Guaranteed!

Perfectly Clear, Long Lasting Protection for All Aluminum finishes! New Product Introduction ALUMETRON is a new discovery from Aurora Marine Industries. It’s a perfectly clear polymer coating that bonds to aluminum. The bond is both chemical as well as mechanical giving it incredible durability, making it suitable for constant water immersion in fresh as well as salt water. It’s perfect for aluminum pontoons and fishing boats. You’ll love how it keeps your pontoons shiny and free from oxidation ... more info

12 oz bottle of Purple Metal Polish. Good for polishing aluminum, brass, stainless. Removes blueing from chrome pipes.

Jack polishes everything! Use it on paint, glass, fiberglass, stailnless, aluminum...etc! Spray on and buff to a brilliant, long lasting shine! Great for the car, truck or boat!

6" Stainless spot mirror includes L bracket for mounting.

7.5" Stainless mirror has center mounted stud and includes L bracket for mounting.

7.5" Stainless spot mirror features an offset mounting stud and includes mounting L bracket.

Economy stainless steel west coast mirror. Fits most standard truck applications.

Stainless mirror head features 12 volt heating element and pigtail. Fits most standard west coast mirror applications.

18" Snow wiper blade from Michelin will fit most 18" applications including car, pickup and big rig.

20" Snow wiper blade from Michelin will fit most 20" applications including car, pickup and big rig.

All purpose Michelin wiper blade. Will fit most 18" applications for cars, pickups and big rigs.

20" Michelin wiper blade will fit most 20" applications for cars, pickups and big rigs.

18" Michelin Symphony beam style blades feature a frameless design for use in summer or winter. Universal mounting fits most vehicles.

20" Michelin Symphony beam style blades feature a frameless design for use in summer or winter. Universal mounting fits most vehicles.

22" Michelin Symphony beam style blades feature a frameless design for use in summer or winter. Universal mounting fits most vehicles.

Brand new. Q Plus Brake kit include 2-brake shoes with 23,000 lb rated lining and 1-hardware kit. No cores required!

1.22 ounce bottle of Loctite Red thread sealer.

Squeeze tube of Mack's famous white silastic RTV. Seals just about everything including carriers, oil pans, valve pans, etc... (Not rated for high heat applications)

3M Permatex weatherstrip adhesive is excellent for attaching weather striping or loose trim.

33mm chrome push on nut covers fit all hub pilot applications (wheel nut has built in flange) 10 Nut Covers per pack.

Stainless steel vent shades for the Granite, Vision and CH. Mounts above the roll up windows to help provide ventilation without exposing the interior to rain. Attaches with supplied 3M tape. Sold as a pair only.

For For CH, CL, CX & Granite Models - Fits on rocker panel below door. Laser cutout Mack logo. Fastens using existing hardware. Sold in pairs only.

Custom molded floor mats are designed to fit the Mack Granite, Pinnacle and Vision/Rawhide models. Maximum protection for your cab!

Increase the life of your rear motor mounts with this kit from Atro. Includes all hardware and 8 polyurethane motor mount insulators. This kit fits most Mack trucks with 4 bolt mount Mack Transmissions. (Mack Kit Number is 204SX216)

Polyurethane mount kit for Mack Trucks with Eaton/Fuller transmissions. Poly Insulators drastically improve the life span of your mounts and other related components! This kit is for Fuller Transmissions with the 4 bolt set up.

Polyurethane lower insulator for the common Mack 44K Camel back Suspension. This poly insulator replaces Mack 10QK36B (uses 4 per truck) The lower pad is usually the same on all 44K camel back suspensions. Check application for the correct upper pad.

Polyurethane upper insulator for the common Mack 44K Camel back Suspension. This poly insulator replaces Mack 10QK365 (uses 4 per truck)

Polyurethane upper insulator for the common Mack 44K Camel back Suspension. This poly insulator replaces Mack 10QK370 (uses 4 per truck)

Individual polyurethane replacement insulators for Mack Rear Engine Mounting. Usually sold in sets of 8 per truck.

Individual polyurethane replacement insulators for Mack Rear Engine Mounting. Usually sold in sets of 4 per truck. (2 bolt set up) Hardware not included.

1 set of Diesel hood emblems.