stockf7

Dont know much about it maybe you guys can help

Painted the hood this weekend

Now that I see the 2 trucks together I also like the round lights but... that the ones I’m putting in are a bit different we will see

I fiber glassed the hood myself its easy, make sure your back side is clean I use a die grinder with a carbide burr to rough it up. Get some resin, hardener and fiberglass matting. I would put about 2-3 layers over the crack on the back side first making sure you are 3-4 inches over the crack. On the top side feather it out (make sure you are in to the new fiberglass) so u can stack the matting in layers until you are just over flush with the good part of the hood. Sand the fiberglass may have to add a bit of Bondo, sand then paint.

Just needs a sand then paint this weekend

just set the cab on for now

Putting dual square head lights from a Kenworth in the truck

Just used 40 grit sandpaper with orbital sander and set in on grind until got close and switched to 80 grit to take it to down the fiberglass

Hood sanded there was 11 yes 11 coats of paint on the hood, would like to know the past of this truck.

Ya today is nice only -13 C

Pic of the cab sandblasted, some body work and then paint...

LOL Would be surprised how well it turned out, there is a small gap under the sea can so there was just a nice draft to carry the over spray out the door. And this is my shop, storage place everything until I can start my shop in the spring.

I have an ENDT 675 and looking for overhaul kit, mack wants 6K for long block parts any info will help thanks

Working on my mack 675 the engine is removed from the truck what do you guys use for an engine stand thanks