04 Granite CV713 no ABS light or self check

[wrenching4life]

Hey all I have an 04 Granite you turn the key on there is no ABS light bulb check in the dash and also i don't hear the ABS self checking on the chassis the "clicking" noise. Iv checked the fuse on the driver side firewall and iv checked the two circuit breakers inside the cab on the pass side all have power and are in good working order, any thoughts? thanks all!

[Keffer inc]

I think there is a third breaker in the glove box?

[wrenching4life]

I found a third in the glove box and all are in good shape. still no self check and their is 12v at all the breakers and fuses. any other thoughts?

[wheeler73]

You will need to check for powers and grounds to the abs module. The module in mounted on the right hand kick plate next to the vecu. You will need to remove the plate.

[wrenching4life]

you would not happen to have a wiring pin-out or  diagram would you? or any other further diagnostic? 

[rolandadam]

pin 14 is power and pin 15 is ground 

[Jorge Santos]

Hi I figure it out. There is relay under the hood called TRLR ABS POWER some mechanics will remove it to not work on the ABS light. I had the same issue with a truck here in the shop and I just put a new relay in it form Mack. Also there is a fuse under the hood called 49 (10A) ABS IGN make sure the one is good. It’s how I fix the same problem your having.