Jump to content

2012 Mack


Recommended Posts

Was going to adjust clutch & can't find adjustment mechanism; or just don't know what am looking for; clutch brake works fine but pedal lets to far up for my liken; seen a lot of different styles in my day but not like this; unless I missed it; anybody know about this type I would appreciate any information; thanks

Link to comment
Share on other sites

the clutch I used to have has a 5/8 spring loaded bolt for adjusting.

No cover like the others.

bar engine over til bolt is at bottom. box wrench, push in to release and turn

. Be sure to wiggle a bit to make sure the head is locked

  • Like 1

Success is only a stones throw away.................................................................for a Palestinian

Link to comment
Share on other sites

Check with the dealer by serial # if the truck was equipped with a Solo clutch. If you rotate the clutch 360 deg. And only find a tab with a channel to slide that tab left to right it is a self adjusting Eaton Solo clutch. They are quite common but in most cases I install adjustable clutches when replacement time comes due.

Link to comment
Share on other sites

Check with the dealer by serial # if the truck was equipped with a Solo clutch. If you rotate the clutch 360 deg. And only find a tab with a channel to slide that tab left to right it is a self adjusting Eaton Solo clutch. They are quite common but in most cases I install adjustable clutches when replacement time comes due.

Yea that's what it is; Thanks

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...