sllimec47 Posted December 19, 2014 Share Posted December 19, 2014 Does anyone know if Mack made a true 55000lb set of rears or just 50000lb? Quote Link to comment Share on other sites More sharing options...
rick harper Posted December 19, 2014 Share Posted December 19, 2014 they made 55K Quote Link to comment Share on other sites More sharing options...
rsb502 Posted December 25, 2014 Share Posted December 25, 2014 I thought it was 44,52,58,65k. I've never had over 44w 52k springs. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
blackdog2 Posted December 25, 2014 Share Posted December 25, 2014 Anything over 46000 are 5 inch wide leafs. Quote Ed Link to comment Share on other sites More sharing options...
MACKS Posted December 25, 2014 Share Posted December 25, 2014 If your truck is a CL then they would be 58000 or 44000,most likely 440000 if its a factory tri axle I just bought a 20000 drop axle for my 96 cl,mine was a factory 10 w dump with 58000 rears. Quote Link to comment Share on other sites More sharing options...
Joe Ditchkus Posted December 25, 2014 Share Posted December 25, 2014 Macks Does NY enforce the Federal Bridge Law on Long Island. I know in cental NY around the Watkins Glen,Retsoff area they do.Not 100% sure on the #'s but you need 21' outer bridge to scale over 70 or 71,000 lbs.My tri-axle has a wheelbase of 239" outer bridge of 22'.Pa. is starting to have selective enforcement of this law at times. Joe D. 1 Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted December 25, 2014 Share Posted December 25, 2014 In okla we are cut back more.With 24 ft and 5 axle on the ground we can only gross 63000 Quote glenn akers Link to comment Share on other sites More sharing options...
MACKS Posted December 25, 2014 Share Posted December 25, 2014 Joe,I have the grandfathered down state type 1 permit,all I need is a 16 foot wheel base and now starting in 2115 I will also need to have four axles,Ill be able to gross 79000 on my truck with the new drop axle,I know its stupid to have a drop axle with 58000 rears but that's what I have to do. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.