antique61cmodel Posted November 9, 2014 Share Posted November 9, 2014 Looking for these wheel cylinders would like to buy 4 of them id rather not get them bored and sleeved if possible anyone have any idea where to find them i have tried and older Napa store, they came off of a 1961 Mack C model fire truck not sure what other vehicle they have been used on any leads would be very appreciated believe the cylinder bore size is 1 7/8"Thank youAndrew Quote Link to comment Share on other sites More sharing options...
Raymond Posted November 23, 2014 Share Posted November 23, 2014 Try Other NAPA store I used the WAGNER # on CLY. got all 8 Cly.needed at $50 plus and master Cyl. at $90 Quote Raymond Link to comment Share on other sites More sharing options...
Charlie Hatfield Posted November 24, 2014 Share Posted November 24, 2014 Google the Wagner casting number and see if it shows anything Quote Link to comment Share on other sites More sharing options...
1958 F.W.D. Posted November 24, 2014 Share Posted November 24, 2014 Walk into another NAPA store, the older the better, including the guy behind the counter. Drop them down on the counter and just say "I need four of these or the rebuild kits."That's all you have to say. DO NOT SAY WHAT THEY ARE OFF OF. That will only confuse things. Let them find it via the Wagner casting number. 1 Quote TWO STROKES ARE FOR GARDEN TOOLS Link to comment Share on other sites More sharing options...
IH Farms 2 Posted November 26, 2014 Share Posted November 26, 2014 I've found that to be the best method with any part with napa unless it's a car part made in the last 10 years Quote Link to comment Share on other sites More sharing options...
Trent Posted April 3, 2017 Share Posted April 3, 2017 I am also looking for the same wheel cylinders did you ever find any or the correct part number I'm in dire need of them also Quote Link to comment Share on other sites More sharing options...
1941 ED Posted April 3, 2017 Share Posted April 3, 2017 I am searching right now, 58 FWD is right if you give them too much info they get scared..unless it is an older Parts employee. I will message you back with a direct message when I have a price. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.