nedly05 Posted April 20, 2014 Share Posted April 20, 2014 http://www.josephequipment.net/landing.htm?http://www.truckpaper.com/list/list.aspx?ETID=1&pcid=2000763270&dlr=1&bcatid=26&catid=217EDIT-I can't get the link to go directly to the truck, its the 10th truck down, single axle RD686.Its in NH, we are downsizing and the Granite will be sold. I really want to find a clean R model single axle to replace it. This truck looks pretty clean, I have an email in, will try to call tomorrow.What I would like in a truck:CLEAN!!!12 fronts23 rears275-300 HP/ JakeMack 6 or 7 spd or Fuller 8LL10-12' boxtarppintle with air and electric.THANKS!!!!!! Quote Link to comment Share on other sites More sharing options...
hicrop10 Posted April 20, 2014 Share Posted April 20, 2014 Looks nice and clean,would check over the frame real close.Since it has a plow on it ,it may also had a salt spreader on the back that would have rotted everythind back there.We had 15 DM600 that had both plows and spreaders and we would wash them down after every snow storm because of the salt.It looks like they have 2 of them,the other one doesn't have the plow,it may be the better of the 2.Plows can be a bit rough on the front end.Good Luck. Quote Link to comment Share on other sites More sharing options...
nedly05 Posted April 20, 2014 Author Share Posted April 20, 2014 Thanks Mike, salt is a concern because of the plow, the ad says no rust, but I've heard that before lol. What should that truck cost? Quote Link to comment Share on other sites More sharing options...
hicrop10 Posted April 20, 2014 Share Posted April 20, 2014 That the million dollar ? If it 's as clean as it looks you can expect to pay alittle more for it.These smaller truck are sometimes more $ because I would rather have one of them instead of say a Ford F550 or a 650.The Mack is built for what you will be using it for.Keep up on the maintenance and you will be surprize with how long it will last. Quote Link to comment Share on other sites More sharing options...
Bigdogtrucker Posted April 20, 2014 Share Posted April 20, 2014 All I will say is make 110% sure you see it in PERSON before making a deal or sending money,no matter what he tells you about the condition. Quote Link to comment Share on other sites More sharing options...
earthmover Posted April 20, 2014 Share Posted April 20, 2014 That truck looks good from the pictures. It looks like it has some rust between the double frame though. Single axle R models are tough to find. There is one for sale in New Jersey that from the pictures looks in great shape. The only thing is the price seems high. Below is the link to it for comparison. http://www.ironmartonline.com/1988-r-model-single-axle-mack-dump-truck/ 1 Quote Link to comment Share on other sites More sharing options...
Mike Blais Posted April 20, 2014 Share Posted April 20, 2014 This one looks pretty clean in the picture.http://burlington.craigslist.org/hvo/4423749740.html 1 Quote Link to comment Share on other sites More sharing options...
thomastractorsvc Posted April 20, 2014 Share Posted April 20, 2014 In my opinion, the one on Iron planet is about 20K over priced you can see that the frame paint was over some rust in a couple pictures, looks like it was given a paint job to make it look clean. The one on truck paper not sure what they are asking but anything over 7K with an in person inspection I think would be too much. That one on CL is about right and seems to be in just as good as shape, but being from up in the rust belt and being plow trucks they need to be inspected carefully both the cab and frame Quote Robert"I reject your reality and substitute my own." Link to comment Share on other sites More sharing options...
j hancock Posted April 20, 2014 Share Posted April 20, 2014 Huh.....a plow truck with no rust....It has a little growth in the frame.Definitely look in person before a deal is done. 1 Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
ws721 Posted April 20, 2014 Share Posted April 20, 2014 Also I think that green plow truck is "Scani" power. Great for plowing, not enough engine to spin the tires Quote Remember if it's got a hood it's no good! Link to comment Share on other sites More sharing options...
nedly05 Posted April 20, 2014 Author Share Posted April 20, 2014 The one at iron mart is definitely sweet, but if I get $60K for the granite, Im not sure I could justify giving half of it away for that truck, seems a bit high to me. I'm definitely scared of the one on CL in VT, I would almost guarantee its rustier than it appears, plus the box is too short and the plow gear makes it too heavy. I might have to settle for a CH if I can't find an R that makes me happy. Quote Link to comment Share on other sites More sharing options...
nedly05 Posted April 20, 2014 Author Share Posted April 20, 2014 http://hollistontruck.com/1998_Mack_CH612.phpNot a bad looking truck, kinda short and a 5 spd though. Quote Link to comment Share on other sites More sharing options...
nedly05 Posted April 30, 2014 Author Share Posted April 30, 2014 The truck in the original post was sold. Still on the hunt... Quote Link to comment Share on other sites More sharing options...
Popular Post nedly05 Posted May 4, 2014 Author Popular Post Share Posted May 4, 2014 So I finally bought an R model single axle dump. Drove her home yesterday 150 miles or so and she never missed a beat! She's ready for work, but I will definitely do some little things like paint the frame and wheels and do rear brakes this summer. Probably will paint her navy blue next winter. The only thing I can find fault with right now is the doors rattle. Is there some sort of adjustment in the latch to make them hold tighter?She has a EM7 300 with a dynatard and a T2060 trans. Heavy fronts and rears (not exactly sure what they are) 11' box with room for a pusher axle some time down the road. Hopefully tomorrow I can get to DMV and start hauling with her. Edit: I didn't buy the trailer too, just the truck. 3 Quote Link to comment Share on other sites More sharing options...
Timothy Maikshilo Posted May 4, 2014 Share Posted May 4, 2014 Looks great! Nice to have a little bigger box and tanks on both sides. Quote Link to comment Share on other sites More sharing options...
masterwelder Posted May 4, 2014 Share Posted May 4, 2014 Nedly, the truck you bought was just over the hill from me. Saw it alot when I drove by. I dont think it was used daily. I met the owner last year when he stoped at the shop to buy some 4" pipe. Had a good talk with him, seemed like a nice guy. Said he worked for the town highway dept. Did he tell you how he had his house moved from out by the road to out back in the field? That was a interesting process to watch! Good luck with the new truck. I think its a good one. Quote Link to comment Share on other sites More sharing options...
85snowdog Posted May 4, 2014 Share Posted May 4, 2014 Congratulations on the new R. Looks like a good one. I hope it makes you lots of $$$$$. Quote Keith Link to comment Share on other sites More sharing options...
thomastractorsvc Posted May 4, 2014 Share Posted May 4, 2014 Nice looking truck, you got get some pics! Quote Robert"I reject your reality and substitute my own." Link to comment Share on other sites More sharing options...
nedly05 Posted May 4, 2014 Author Share Posted May 4, 2014 Nedly, the truck you bought was just over the hill from me. Saw it alot when I drove by. I dont think it was used daily. I met the owner last year when he stoped at the shop to buy some 4" pipe. Had a good talk with him, seemed like a nice guy. Said he worked for the town highway dept. Did he tell you how he had his house moved from out by the road to out back in the field? That was a interesting process to watch! Good luck with the new truck. I think its a good one.Thats cool, he definitely seemed like a great guy. Lots of people honking when they went by, couple guys stopped to talk shop for a minute, I got the feeling he was well respected in the community. He didn't say anything about the house being moved, but I can't blame him it seems like a much nicer spot where it is now. Quote Link to comment Share on other sites More sharing options...
Popular Post nedly05 Posted May 8, 2014 Author Popular Post Share Posted May 8, 2014 I got my lettering on and took a a bomb can to the frame and hubs. I have since put a new tarp and tarp springs on. The 300 really pulls hard for the weight I can carry, I'm really loving this truck so far!! 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.