I just recently bought a 2004 Mack Vision. Engine turns over but does not start. Anyone have this issue in the past?
Welcome to BigMackTrucks.com
Welcome to BigMackTrucks.com, the best resource on the Internet for Antique, Classic and Modern Mack Trucks!
Please login or register to take advantage of everything BMT has to offer. Memberships are Free and offer many benefits:
If you are having trouble logging in or haven't received your validation email, you can post as a guest in the Guest Forum.
Posted 29 October 2013 - 06:48 AM
Posted 29 October 2013 - 07:01 AM
There are some members (most of them, actually) that are more qualified than I am to assist you but here's a couple of things to check while waiting for those who know what they're talking about to check in:
Is fuel not reaching the injectors for some reason?
Have you checked for codes? With all the electronics these days there are multiple reasons for this. Any additional details you can provide will be helpful.
Now that we have Vision456 as a member, we can retire the old Vision386.
- Vision 386 likes this
Posted 29 October 2013 - 07:08 AM
I have a code 25. Any idea what that means?
Posted 29 October 2013 - 03:56 PM
2-5 is front drive axle oil temp sensor.
Batteries good? even turning over, not enough voltage will cause engine to NOT start.
Fuel? Good? fill filters with fresh fuel and try. Remove filters again and see if fuel is low.
Take fuel line off tank, along with return line. Place both in a bucket of fresh fuel and try.
Tank may have a blockage.
crack one injector line and turn over. fuel should be reaching injector. Also this bleeds any air. This will also cause no start.
That's for now. All easy stuff first.
Posted 30 October 2013 - 08:48 AM
Thanks Hatcity. Trying your suggestions today. Right now not getting fuel to the fuel pump. Can bleed air through just not fuel.
Posted 30 October 2013 - 08:50 AM
Green Dash now I have code 2-5 Front Drive Axle Oil Temp Sensor and 3-5 Engine Brake Output #1. Not getting fuel to fuel pump either.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users