Jump to content

  •  

  • Welcome to BigMackTrucks.com

    Welcome to BigMackTrucks.com, the best resource on the Internet for Antique, Classic and Modern Mack Trucks!  

     

    Please login or register to take advantage of everything BMT has to offer.  Memberships are Free and offer many benefits:

     

    • Start new topics and reply to others
    • Subscribe to topics and forums to get automatic updates
    • Showcase your trucks in our Garage
    • Photo Gallery, Member Blogs and much more...
    • Add events to our community calendar
    • Create your own profile and make new friends
    • Customize your experience!
    • Mack Dealer and Corporate personnel can contact the ADMIN after registration for access to the Dealer Forums.

    If you are having trouble logging in or haven't received your validation email, you can post as a guest in the Guest Forum.


    login  register
    Guest Message by DevFuse
     

    Photo

    Warning Light On Mack



    • Please log in to reply
    4 replies to this topic

    #1 OFFLINE   russell

    russell

      Rookie

    • Puppy Poster
    • Pip
    • 1 posts
    • Make:mack
    • Model:2001

    Posted 07 February 2007 - 06:10 AM

    I have a 2001 mack truck, and a warning light has come up on the dash that looks similar to this:

    ( <--> ) however there is a full circle around the arrows and the bracket lines are outside the circle.

    i have searched everywhere but cannot find anything that tells me what this symbol/light means..

    if anyone could help asap, it would be very much appreciated.

    thanks.


    #2 OFFLINE   Supertrucker

    Supertrucker

      Truck Nut

    • Puppy Poster
    • PipPipPipPipPipPip
    • 46 posts
    • Location:Crookston Minnesota
    • Make:Mack
    • Model:B-61
    • Year:1957

    Posted 07 February 2007 - 11:54 AM

    Not sure if this hold true for 2001 or not, but on earlier CH's you turned the cruise switch on and held the set switch for a few seconds until the SEL flashed once then a number of times according to what the code was. Again, I'm not sure if this is the same for yours but the manual had the common codes listed. Otherwise, contact the nearest dealer I guess. Hope this helps
    Mack- Built Tough to Ride Rough!
    Driver and operator for Bertils Gravel and Excavation

    #3 OFFLINE   thermodynediesel

    thermodynediesel

      BMT Veteran VIP

    • BMT VIP
    • 241 posts
    • Location:Minnesota
    • Make:Mack
    • Model:B-61
    • Year:1959

    Posted 07 February 2007 - 01:43 PM

    :SMOKIE-RT: Super trucker,post some pics of the B if you have some. Have a good day.

    #4 OFFLINE   Q-TRANS

    Q-TRANS

      First Gear

    • Puppy Poster
    • PipPipPip
    • 12 posts
    • Location:Ontario Canada
    • Make:MACK
    • Model:CH-613
    • Year:2000

    Posted 07 February 2007 - 06:28 PM

    Call the FREE

    MACK ONE CALL CENTRE 1-800-866-1177 , need the VIN # and they should be able to help you out.

    #5 OFFLINE   Pete

    Pete

      Truck Nut

    • Puppy Poster
    • PipPipPipPipPipPip
    • 33 posts
    • Location:Mississauga ON
    • Make:Brockway
    • Model:N361
    • Year:1971

    Posted 11 February 2007 - 03:45 PM

    That is similar to the check engine light in your pickup or car,it can be for all kinds of stuff.My 96 it would come on once in a while stay on for a while and then go out.I had dealers check the fault codes and it would show nothing.One common thing is a slightly low A-freeze level that will trigger the water level sensor.It does not have to be down much,sometimes all it takes is to warm up a bit ,the a-freeze will expand from the heat.A quick way to check this is to pull ahead up to 4 or 5mph and hit the brake hard,if that all it is the light will go out fr.om the A-freeze sloshing around in the tank.
    If you haven't had the truck long get the codes checked to put your mind at ease.If all your gauges are showing normal temp, oil pressure,and there ar no wierd noises coming out of it your chances of doing serious damage are almost non existant.
    I ran mine for 10 years and nothing ever happened.
    Pete




    0 user(s) are reading this topic

    0 members, 0 guests, 0 anonymous users